Please wait while we process your order...

Link copied!
Genuine OEM Parts For
Titan, SpeeFlo, SprayTech & Wagner Authorized Titan Dealer Fitment help: (713) 931-0006 30-Day Return Window (RMA Required)
In Short

The Elite 4500 comes as a High Rider (2407310) and a Low Rider (2407311), and each has its own cart diagram on this site. The High Rider page lists a wheel, a cart weldment and handle 0537215A. The Low Rider page lists a drip cup, a frame and handle 0537216A. Match the model number on your sprayer, then open that page.

Two Elite 4500 versions, two cart pages

Titan sells the gas-powered Elite 4500 in two frame styles. Dealers and Sherwin-Williams list the High Rider as 2407310 and the Low Rider as 2407311, and the site's parts diagrams use the same two numbers. The engine, pump and spray side are the same kind of sprayer either way. What changes is the cart the sprayer sits on, so a handle, wheel or drip cup order starts with knowing which of the two you own.

The site gives each version its own page: Elite 4500 Cart Assembly (2407310) with 13 parts and Elite 4500 Cart Assembly (2407311) with 16. Reading them side by side shows where they differ:

What each Elite 4500 cart page lists

ItemHigh Rider (2407310)Low Rider (2407311)
Cart assembly2403553A2402006A
Handle, packaged0537215A0537216A
Cart weldment / frame2403431A, cart weldment packaged Elite 4500 HR2402005A, frame
Wheel670-109No wheel listed on the page
Drip cup and screwNot listed700-1041 drip cup, 9805230 screw
Wheel spacer and axle cap295687 and 800-019295687 and 800-019
Handle hardware9841504, 590-504, 590-506, 590-5089841504, 590-504, 590-506, 590-508

Taken from the two diagram pages. If your cart has a part that is not on your model's page, call before you order.

Two things in that table matter when you order. The handle numbers differ, so a handle ordered from the wrong page is the most likely cart mistake. And the drip cup shows up only on the Low Rider page, so do not expect to find one on a High Rider cart diagram.

High Rider cart parts (2407310)

The High Rider page is the one with the wheel and the welded cart frame. Callouts run from the handle at 1 to the wheel at 10 and the axle cap at 11, with a plug at 12.

Elite 4500 High Rider cart parts

1
Cart assemblyThe complete cart listed at the top of the 2407310 page, with no callout number.Part #2403553A
2
Cart weldment, packaged, Elite 4500 HRThe welded frame, callout 8 on the page.Part #2403431A
3
Handle, packagedThe handle for this page; the Low Rider page lists a different number.Part #0537215A
4
WheelCallout 10. The only cart page of the two that lists a wheel.Part #670-109
5
Wheel spacerSits with the wheel and axle cap; also on the Low Rider page.Part #295687
6
Axle capCallout 11, at the end of the axle.Part #800-019
7
Snap buttonHandle hardware, callout 2.Part #9841504
8
Roll pinHandle hardware, callout 5.Part #590-508

The sleeve handle (590-504), the flat washer 590-506, lock washer 856-002, screw 856-921 and plug 9885571 complete the list. A worn wheel, a lost axle cap or a loose handle are the usual reasons to open this page, and every one of them is a small part that is easier to order by callout than to describe on the phone.

Low Rider cart parts (2407311)

The Low Rider page lists 16 entries because two of them repeat: the drip cup and the 856-002 lock washer each appear at two callouts. It carries its own handle and frame, and it is the page with the drip cup.

  • 700-1041 drip cup, callout 1, with 9805230 drip cup screw at callout 5.
  • 0537216A handle, packaged, callout 15.
  • 2402005A frame, callout 10, and 2402006A cart assembly, listed without a callout number.
  • 295687 wheel spacer (callout 3), 800-019 axle cap (callout 4) and 856-002 lock washers (callouts 2 and 8).

The page does not list a wheel number. If you need a wheel for a Low Rider, phone with the model and serial number rather than borrowing 670-109 from the High Rider page. Some of these cart numbers also appear on Elite 3500 cart pages, and some catalog fitment notes mention other models. That is not a reason to order a 3500 cart part for a 4500; use the 4500 page for your version.

The siphon system

The Elite 4500 Siphon System page lists six parts, which is the paint feed from the bucket to the sprayer:

The inlet screen is the one to check first. A strainer that is partly blocked causes pressure loss, pulsing and spitting,. Clean it after every job. The hose and clamp come next if the sprayer sucks air or will not hold its prime. The same six numbers appear on the Elite 3500 siphon page, but order from the 4500 page for a 4500.

Main assembly hardware

The Elite 4500 Main Assembly page has 15 parts. The engine (980-331A) and the pulsation dampener (2419184) are the big items, and the pump side has its own pages. The rest is what holds the sprayer together and feeds it:

  • 2421907 welded suction tube, callout 3, and 0537231A siphon assembly, callout 14. The page lists both as complete items, so check which one matches what is on your sprayer.
  • 236219 ground cable, callout 9. The diagram lists it; follow your manual for how the sprayer must be grounded.
  • 730-334 hose tie clamp, callout 4.
  • 537727 relief valve label and 2364469 pressure control label. Replace a label that has worn unreadable, since they identify the relief valve and the pressure control.
  • Mounting hardware: 860-552 and 0509538 screws, 756-088 flat washer, 860-002 lock washer and 9811122 nut.
  • 2402006A cart assembly, callout 13, the same number that appears on the Low Rider cart page.

Ordering the right page

Confirm your model number

Use the number your sprayer was sold under, 2407310 or 2407311. If you are not sure which you own, phone with a description and the serial number.

Open the cart page for that number

Use the 2407310 page for a High Rider and the 2407311 page for a Low Rider. They are different pages with different handles.

Match the callout, not the look

Wheels, handles and washers look alike. Find the numbered callout on the diagram, then add the part with that number.

Use the shared pages for the paint side

The siphon, main assembly and pump pages cover both versions. Titan also lists an Elite 5500; if you own one, confirm fitment by phone before you order from the 4500 pages.

Call when the diagram does not settle it

Phone (713) 931-0006 with the model and serial number. Manuals are on our manuals page.

Common Elite 4500 cart, siphon and main assembly parts:

−16%
Titan
Titan 2403431A Cart Weldment Packaged Elite 4500 HR
Part #: 2403431A
$1,319.39 $1,570.70 Save $251.31
Buy Now
Titan 0537215A Handle PKGD −15%
Titan
Titan 0537215A Handle PKGD
Part #: 0537215A
$303.85 $355.80 Save $51.95
Buy Now
Titan 0537216A Handle, Pkgd −15%
Titan
Titan 0537216A Handle, Pkgd
Part #: 0537216A
$385.58 $451.50 Save $65.92
Buy Now
Titan 670-109 Wheel −10%
Titan
Titan 670-109 Wheel
Part #: 670-109
$102.50 $114.40 Save $11.90
Buy Now
Titan 700-1041 Drip Cup #1 Seller
Titan
Titan 700-1041 Drip Cup
Part #: 700-1041
$16.70
Buy Now
Titan 0533906 Siphon hose 48" −14%
Titan
Titan 0533906 Siphon hose 48"
Part #: 0533906
$257.35 $298.90 Save $41.55
Buy Now
Titan 710-046 Inlet Screen −12%
Titan
Titan 710-046 Inlet Screen
Part #: 710-046
(1)
$33.32 $37.80 Save $4.48
Buy Now
Genuine OEM
Titan
Titan 236219 Ground Cable
Part #: 236219
$7.43
Buy Now

The Short Version

Check whether your Elite 4500 is a 2407310 or a 2407311, because the handle numbers, frames and drip cup differ between the two pages. The wheel (670-109) is only listed on the High Rider page, and the drip cup (700-1041) only on the Low Rider page. The siphon and main assembly pages serve both.

Not sure which Elite 4500 you have?

Call (713) 931-0006 with the model and serial number and our parts team will point you to the right cart page.

(713) 931-0006Order by Parts Diagram
Frequently Asked Questions
What is the difference between the Elite 4500 High Rider and Low Rider?
They are separate versions, 2407310 for the High Rider and 2407311 for the Low Rider, each with its own cart diagram on this site. The pages list different handles (0537215A and 0537216A) and different frames. The Low Rider page also lists a drip cup. The spray side is the same sprayer, so check the cart page for your number.
What wheel fits an Elite 4500?
The 2407310 High Rider cart page lists 670-109 as its wheel. The 2407311 Low Rider cart page does not list a wheel number. If you have a Low Rider and need a wheel, call (713) 931-0006 with the model and serial number before you order.
What siphon hose does an Elite 4500 use?
The Elite 4500 Siphon System page lists 0533906, a 48 in. siphon hose, with a 103-679 hose clamp, a 730-332 down tube, a 710-046 inlet screen and two adapters, 0537918 and 194-761. Order the hose from that page rather than from another model's.
Does the Elite 4500 Low Rider have a drip cup?
The 2407311 Low Rider cart page lists a 700-1041 drip cup and a 9805230 drip cup screw. The 2407310 High Rider page lists neither. Do not assume every unit has one; check which page matches your model number.
On this page

Added to cart

Your Cart
No items in cart.
Add more items
Total 0
Checkout Modify Cart