Titan 103-679 Hose Clamp
OEM Titan Hose Clamp
Titan 103-679 Hose Clamp is an OEM 1 inch band clamp used to secure fluid or air hoses at connection points on Commander, Hydra, Admiral, PowrTwin, PowrLiner, and Elite sprayers, providing uniform compression to prevent leaks and hose detachment under pressure [citation:1].
Compatibility Table
Replacing a worn or corroded hose clamp restores secure hose retention, eliminates fluid and air leaks, and prevents hose blow-off under pressure.
Titan Hose Connection Replacement Component
Titan 103-679 Hose Clamp for Commander, Hydra, PowrTwin and PowrLiner Sprayers
Titan 103-679 is an OEM 1 inch band clamp designed to secure fluid or air hoses at connection points across an extensive range of Titan and Speeflo sprayer systems. This clamp applies consistent radial tension around hoses, maintaining a leak-free seal that prevents fluid or air leaks, hose blow-off, and air ingestion that can disrupt fluid flow or pump priming [citation:1]. Official Titan manuals list this clamp as a "Clamp, hose, 1"" used in siphon hose assemblies on Commander and Hydra Pro Super models [citation:9]. Verified compatibility data confirms it fits Commander air-powered airless sprayers, Hydra M 2000 and M 4000, Hydra Pro Super, Admiral, PowrTwin 12000, 3500, 4500, 4900, 5500, 6900, 8900, PowrLiner 3500, 4000, 4900 XLT, 4950, 5000, 5500, 6900 XLT, 6950, 8900 XLT, and Elite 3500 and 4500 [citation:1][citation:2][citation:3]. Over time, hose clamps can corrode, lose tension, or become damaged from overtightening, allowing hoses to slip off and causing material spills, pressure loss, or pump cavitation. If fluid or air leaks are observed at hose connections, inspect the clamp for signs of corrosion, deformation, or reduced tension. Also examine the hose itself for cuts or swelling that could prevent a proper seal. The 103-679 is commonly serviced alongside siphon tubes, rock catcher assemblies, fluid hoses, and other hose clamps. Always verify fitment against your specific model's parts diagram before ordering.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | OEM Titan 1 inch band clamp for securing fluid and air hoses on compatible sprayer models. |
| Function | Applies consistent radial tension around hoses; maintains leak-free seal; prevents fluid or air leaks, hose blow-off, and air ingestion. |
| Compatible Models | Commander; Hydra M 2000, M 4000, Pro Super; Admiral; PowrTwin 12000, 12000GH, 12000XLT, 3500, 3500 50th Anniversary, 4500, 4900, 5500, 6900, 8900; PowrLiner 3500, 3500s, 4000, 4900 XLT, 4950, 5000, 5500, 6900 XLT, 6950, 8900 XLT, 8900 XLT SP; Elite 3500, 4500. |
| OEM Part Number | 103-679 Hose Clamp (alternate: 0103-679). |
| Common Problems Solved | Fluid or air leaks at connection points, loss of tension allowing hoses to slip off, corrosion or rust, deformation preventing proper seating, hose blow-off under pressure, and air ingestion disrupting pump priming. |
| Target Users / Markets | Painting contractors, rental fleets, maintenance crews, and repair shops running compatible Titan or Speeflo sprayers. |
| Commercial Benefits | Restores secure hose retention, prevents fluid and air leaks, eliminates pressure loss, reduces downtime from connection failures, and maintains consistent fluid delivery. |
When servicing the 103-679 Hose Clamp, inspect for corrosion, deformation, or reduced tension. Replace any clamp that does not provide firm, even pressure around the full circumference of the hose. Also examine the hose itself for cuts or swelling that could prevent a proper seal. Always verify fitment against your specific model's parts diagram before ordering.
Frequently Asked Questions
No reviews yet. Be the first to review this product!