Titan part 9851629 is a 12 Amp, Class CC Fuse designed for electrical protection in compatible Titan Helix LP sprayer models. This fuse provides critical overcurrent protection for the sprayer's electrical circuit, interrupting power in the event of a short circuit or excessive current draw. Proper fuse rating and class are essential for equipment safety and preventing electrical damage.
| Part Number | 9851629 |
|---|---|
| Part Description | Fuse, 12 Amp, Class CC |
| Brand | Titan |
| Fits | Helix LP series sprayers |
| Condition | New |
The Titan 9851629 Fuse is a 12 Amp, Class CC electrical protection device designed specifically for Titan Helix LP (Low Pressure) series sprayers. This fuse provides essential overcurrent protection by interrupting the electrical circuit when current exceeds safe levels, helping to prevent damage to the sprayer's motor, controls, and wiring. The Class CC designation indicates specific physical dimensions and interrupting capacity suitable for this application.
Electrical fuses are consumable safety components that sacrifice themselves to protect more expensive equipment. A blown fuse indicates an electrical fault has occurred, such as a short circuit, motor overload, or wiring problem. Always investigate the cause of fuse failure before replacing with a new one. Using the correct amperage rating and fuse class is critical - an improperly rated fuse can fail to protect equipment or create fire hazards.
NEVER replace a fuse with one of higher amperage rating or different class. Always use the exact replacement specified for your equipment. If a fuse repeatedly blows, this indicates an ongoing electrical problem that must be diagnosed and repaired before continuing operation. Always disconnect power before inspecting or replacing fuses.
| Amperage rating | 12 Amp - interrupts circuit when current exceeds this value |
|---|---|
| Fuse class | Class CC - specific physical dimensions and characteristics |
| Voltage rating | Typically 250V or as specified for sprayer application |
| Interrupting capacity | Designed to safely interrupt fault currents |
| Overcurrent protection | Protects against excessive current that could damage components |
|---|---|
| Short circuit protection | Interrupts dangerous high-current short circuits |
| Wiring protection | Prevents overheating and potential fire in electrical wiring |
| Equipment safety | Protects motor, controls, and other electrical components |
Titan part 9851629 is specifically designed for Titan Helix LP (Low Pressure) series sprayers. The "LP" designation indicates these are lower pressure models within the Helix series, and they require this specific 12 Amp, Class CC fuse for proper electrical protection according to the manufacturer's specifications.
| Compatible Models | Series | Model Designation |
|---|---|---|
| Helix LP | Helix Series | Low Pressure models |
Fuses should only be replaced when they have blown (interrupted the circuit). Always follow proper troubleshooting procedures:
Check for broken filament, discolored window, or other signs of failure.
Before replacement, identify and correct the problem that caused the fuse to blow.
Always replace with identical 12 Amp, Class CC fuse - never substitute.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
