Titan part 818-002 is an elbow fitting used to redirect fluid flow in compatible airless sprayers and hydraulic equipment. This fitting creates a 90-degree turn in hose or tube connections, allowing for compact routing in tight spaces. Replacing a worn, cracked, or leaking elbow restores proper fluid flow and prevents costly leaks and pressure loss.
| Part Number | 818-002 |
|---|---|
| Part Description | Elbow |
| Brand | Titan |
| Fits | Select Impact, Speeflo, PowrLiner, PowrTex, and PowrTwin models (see long description) |
| Condition | New |
The Titan 818-002 Elbow is a genuine OEM fitting designed to change the direction of fluid flow in hydraulic and fluid delivery systems. This 90-degree elbow allows for efficient routing of hoses and tubes in confined spaces, reducing strain on connections and preventing kinks.
Elbow fittings are critical components in sprayer and hydraulic systems, directing fluid from pumps to valves, filters, and other components. Over time, these fittings can develop cracks, wear at sealing surfaces, or become corroded, leading to leaks and pressure loss. Replacing a damaged elbow with a new 818-002 restores system integrity, prevents fluid loss, and ensures reliable operation.
| Fluid direction | Changes fluid flow direction by 90 degrees |
|---|---|
| Space optimization | Allows compact routing of hoses in tight spaces |
| Connection point | Provides a secure junction between system components |
| Visible leaks | Fluid seeping from the fitting or connection points |
|---|---|
| Cracks / damage | Visible cracks in the fitting body |
| Corrosion | Heavy rust or pitting that compromises integrity |
| Stripped threads | Threads are damaged and won't seal properly |
| Deformation | Fitting is bent or misshapen |
Titan part 818-002 is compatible with the following Impact, Speeflo, PowrLiner, PowrTex, and PowrTwin equipment models. Always confirm fitment using the correct parts diagram for your exact model and revision.
| Compatible Model | Component |
|---|---|
| Impact 1640 | Elbow |
| Speeflo PowrDrive (759-135) | Elbow |
| PowrLiner 6000 | Elbow |
| PowrLiner 6900 XLT SP | Elbow |
| PowrLiner 8900 XLT SP | Elbow |
| PowrLiner 8900 | Elbow |
| PowrTex 1200SF | Elbow |
| PowrTwin 12000GH | Elbow |
| PowrTwin 3500 | Elbow |
| PowrTwin 4500 | Elbow |
Table scrolls — all compatible models listed
When replacing an elbow fitting, these associated components are often inspected or replaced at the same time.
Inspect the connected hose for cracks, abrasion, or deterioration at the fitting interface.
Apply fresh thread sealant or PTFE tape during installation to ensure a leak-free connection.
If the elbow uses O-ring seals, replace them if they show signs of wear or compression set.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
