762-135 is an outlet cage designed to house the outlet valve ball and seat in the fluid section of numerous Titan airless sprayers. This cage guides the ball during operation, ensuring proper seating and consistent one‑way flow. Replacing a worn, cracked, or damaged outlet cage restores proper valve alignment, eliminates pressure loss, and ensures reliable spray performance.
| Part Number | 762-135}, |
|---|---|
| Part Description | Outlet Cage}, |
| Brand | Titan |
| Fits | Airless Sprayer 330, 340, 440 XC, 440 I, 550 XC, 660 XC, 690 GXC, 640 I, 740 IX; Epic 447 HPX, 660 HPX, 690 HPG; Performer 640 I Airless Sprayer; Powrliner 3100; ProMark II; RentSpray 600, 700, RentSpray Plus |
| Condition | New |
The 762-135 Outlet Cage is a critical component in the fluid section of compatible Titan sprayers. It houses the outlet valve ball and seat, providing a precise bore that guides the ball into proper alignment with the seat. This cage ensures that the ball lifts evenly during the downstroke and returns to a centered seal on the upstroke, maintaining consistent one‑way flow and preventing backflow.
Over time, the outlet cage can become worn, cracked, or damaged from high‑pressure cycling, abrasive coatings, or improper installation. A compromised cage may cause the ball to misalign, leading to poor sealing, pressure loss, surging, or complete loss of prime. Replacing the outlet cage restores proper valve geometry and ensures reliable pump performance.
| Houses ball & seat | Provides a precision bore that aligns the valve components |
|---|---|
| Guides ball travel | Ensures the ball lifts and seats squarely for a positive seal |
| Maintains flow direction | Supports one‑way flow, preventing backflow and pressure loss |
| Pressure loss / surging | Pump cannot maintain steady pressure or stalls erratically |
|---|---|
| Difficult to prime | Sprayer struggles to draw fluid or loses prime repeatedly |
| Visible damage | Cracks, wear, or deformation in the cage body |
| During pump rebuild | Always replace when overhauling the fluid section |
762-135 is a direct replacement for the outlet cage in the following Titan sprayer models. Always confirm fitment using the correct parts diagram for your exact model and serial number.
| Models | Component |
|---|---|
| Airless Sprayer 330 | Outlet Cage |
| Airless Sprayer 340 | Outlet Cage |
| Airless Sprayer 440 XC | Outlet Cage |
| Airless Sprayer 440 I | Outlet Cage |
| Airless Sprayer 550 XC | Outlet Cage |
| Airless Sprayer 660 XC | Outlet Cage |
| Airless Sprayer 690 GXC | Outlet Cage |
| Airless Sprayer 640 I | Outlet Cage |
| Airless Sprayer 740 IX | Outlet Cage |
| Epic 447 HPX | Outlet Cage |
| Epic 660 HPX | Outlet Cage |
| Epic 690 HPG | Outlet Cage |
| Performer 640 I Airless Sprayer | Outlet Cage |
| Powrliner 3100 | Outlet Cage |
| ProMark II | Outlet Cage |
| RentSpray 600 | Outlet Cage |
| RentSpray 700 | Outlet Cage |
| RentSpray Plus | Outlet Cage |
When replacing the outlet cage, these associated components are often inspected and replaced at the same time to ensure a complete repair.
The ball works with the cage and seat. Replace if worn, out‑of‑round, or pitted.
The seat provides the sealing surface. Replace if worn, grooved, or damaged.
If the fluid section is being rebuilt, replace all packings and o‑rings.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
