Part 520-033 is a screw used to secure various components within the spray gun assembly, including handles, guards, or retaining plates. This fastener maintains proper alignment and clamping force between assembled parts. When the original screw becomes stripped, corroded, or lost, replacing it restores secure attachment and reliable gun operation on compatible units.
| Part Number | 520-033 |
|---|---|
| Part Description | Screw |
| Brand | Graco |
| Fits | Airless SGX 20 Airless Gun; Airless S5; Airless G-15 XL Gun |
| Condition | New |
The Graco 520-033 Screw is a threaded fastener used across multiple Graco airless spray gun models, including the Airless SGX 20, Airless S5, and Airless G-15 XL Gun. This screw serves in various applications on these spray guns, commonly securing components such as the trigger guard, handle assembly, retaining plates, or other accessory mounts. While often overlooked during routine maintenance, proper screw function is essential for maintaining the structural integrity and safe operation of the spray gun. The screw must maintain specified clamping force to prevent loosening under the vibration generated during spraying. A loose screw can allow components to shift, creating misalignment that affects trigger operation, spray pattern consistency, or even creates pinch points that compromise operator safety. Over the service life of the spray gun, screws can suffer from several failure modes. Repeated removal for cleaning or repair can strip the threads either on the screw itself or in the receiving hole. Exposure to water-based paints, solvents, or aggressive cleaning solutions can lead to corrosion that weakens the screw or causes it to seize in place. Overtightening can stretch the screw threads, reducing clamp load, while undertightening may allow the screw to back out over time. In some cases, the screw head may become damaged, making removal difficult during future service. Replacing a damaged or missing screw with the correct specification ensures that components remain securely attached, maintains proper alignment, and prevents safety issues associated with loose parts. Using the correct screw is critical, as incorrect thread pitch, length, or head style can damage the gun body or fail to provide adequate retention. Given the low cost of the fastener and the importance of secure component attachment, screw replacement is recommended whenever damage or corrosion is observed.
| Component retention | Secures handles, guards, plates, and accessory mounts to gun body |
|---|---|
| Alignment maintenance | Prevents component shifting that affects trigger or pattern operation |
| Safety assurance | Prevents loose parts that could create pinch points or detachment hazards |
| Stripped threads | Screw spins without tightening or will not hold torque |
|---|---|
| Corrosion | Visible rust, pitting, or seized condition in the gun body |
| Head damage | Stripped drive feature making removal or tightening impossible |
| Missing fastener | Screw lost during disassembly or cleaning |
Part 520-033 is compatible with the following Graco airless spray guns. Always confirm fitment using the correct parts diagram for your exact model and revision.
| Model | Component |
|---|---|
| Airless SGX 20 Airless Gun | Screw |
| Airless S5 | Screw |
| Airless G-15 XL Gun | Screw |
Fastener-related issues often involve multiple components. When servicing this screw, these parts are commonly inspected at the same time.
A component often secured by this screw; inspect for damage or deformation when replacing the fastener.
May be secured by the same screw; check for cracks or wear when the screw is removed.
The receiving threads in the gun body; if stripped, the body may need repair or replacement.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
