The 500-200-15 Extra Fine Filter – 150 Mesh (2-Pack) is an OEM airless gun filter set designed for select Titan airless spray guns and sprayers. The extra-fine 150-mesh filtration level is intended for very thin materials and fine-finish applications where maximum debris control is required.
| Part Number | 500-200-15 |
|---|---|
| Product Type | Airless Gun Filter – Extra Fine |
| Mesh / Rating | 150 Mesh – Extra Fine |
| Condition | New OEM |
| Includes Components | Extra-fine 150-mesh gun filters (2-pack) |
| Fits | Airless LX 80 II Strip; Airless LX 80 II; Airless LX 80 Platinum; Impact 340 Airless Sprayer; Impact 400 Airless Sprayer |
The 500-200-15 Extra Fine 150 Mesh Filter (2-Pack) is a factory-specified gun filter set used in Titan LX-series airless spray guns and compatible Impact airless sprayers. The 150-mesh rating provides maximum filtration for fine coatings, stains, lacquers, and other low-viscosity materials.
Using an extra-fine gun filter helps protect spray tips, reduce surface defects, and maintain consistent atomization when spraying materials that are sensitive to contamination.
| Extra-fine filtration | Captures very small debris before it reaches the spray tip |
|---|---|
| Finish protection | Reduces surface defects caused by contamination |
| Tip longevity | Minimizes tip clogging and premature wear |
| Restricted flow | Noticeable pressure drop or reduced output |
|---|---|
| Screen damage | Torn, crushed, or distorted filter mesh |
| Persistent clogging | Filter does not clean fully after flushing |
| Routine gun service | Replaced as part of scheduled maintenance |
Part 500-200-15 is compatible with the following Titan airless guns and sprayers. Always verify mesh requirements based on the coating being sprayed.
| Model | Component |
|---|---|
| Airless LX 80 II Strip | Extra Fine 150 Mesh Gun Filter (500-200-15) |
| Airless LX 80 II | Extra Fine 150 Mesh Gun Filter (500-200-15) |
| Airless LX 80 Platinum | Extra Fine 150 Mesh Gun Filter (500-200-15) |
| Impact 340 Airless Sprayer | Extra Fine 150 Mesh Gun Filter (500-200-15) |
| Impact 400 Airless Sprayer | Extra Fine 150 Mesh Gun Filter (500-200-15) |
Proper filtration helps extend tip life and finish quality.
Upstream filtration reduces gun filter loading.
Inspect during routine gun maintenance.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
