Titan 2418850 Gun Extension 10" Packaged (Replaces Titan 651-071)
Extend your spraying reach with the Titan 2418850 Gun Extension 10" Packaged, the replacement for Titan 651-071. This 10-inch spray gun extension helps contractors access ceilings, elevated surfaces, corners, and difficult painting areas while maintaining a practical working distance from the surface.
Application: Extended-reach airless painting and coating work.
Order the Titan 2418850 10-inch Gun Extension from AllTitanParts. Confirm spray gun connection compatibility and required tip guard before purchasing.
Titan 2418850 Gun Extension 10" Packaged - Replaces Titan 651-071
Improve accessibility and spraying convenience with the Titan 2418850 Gun Extension 10" Packaged. This lightweight aluminum extension adds 10 inches of reach to compatible airless spray guns, making it easier to coat ceilings, soffits, elevated walls, recessed surfaces, and other difficult painting locations. Designed for standard 7/8-inch threaded airless spray guns, the extension supports professional spraying applications up to its rated operating pressure of 3,600 PSI (24.8 MPa). Part 2418850 replaces the discontinued Titan 651-071 gun extension.
Which Titan Sprayers Can Use Gun Extension 2418850?
The Titan 2418850 Gun Extension 10" Packaged replaces Titan 651-071 and is relevant to Titan Impact 340, Impact 400, Impact 440, Impact 540, Impact 640, Impact 740, and Impact 840 airless sprayer applications. Titan's accessories literature also identifies the extension as suitable for airless spray guns with standard 7/8-inch threaded connections.
Unlike internal pump components, this accessory attaches to the spray gun rather than directly to the sprayer's fluid section. Therefore, compatibility depends primarily on the installed spray gun, diffuser thread, tip guard, and pressure rating.
Important: Before ordering, confirm that your spray gun uses a compatible 7/8-inch connection. The extension's 3,600 PSI rating must not be exceeded. Titan 2418850 is 10 inches long, even though the discontinued 651-071 listing identifies a 12-inch extension.
Features and Benefits of Titan 2418850 Gun Extension
Additional spraying reach: The 10-inch extension increases the distance between the spray gun and tip guard, helping operators reach difficult areas without excessive stretching.
Lightweight aluminum construction: Designed to minimize unnecessary accessory weight while providing a practical extension for professional coating applications.
Standard threaded connection: The 7/8-inch connection supports installation on compatible airless spray guns without requiring a machine-specific pump modification.
Professional pressure capability: Rated for applications up to 3,600 PSI when used with appropriately rated spray gun components.
Convenient replacement: Titan 2418850 provides a current replacement option for the discontinued Titan 651-071 extension, subject to the stated length difference and connection requirements.
Titan 2418850 Installation and Maintenance Guidance
Before installing the extension, switch off the airless sprayer and follow the manufacturer's complete pressure-relief procedure. Engage the spray gun trigger lock and verify that the spraying system is depressurized.
Remove the existing spray tip guard assembly according to the spray gun manufacturer's instructions. Inspect the spray gun outlet threads and sealing surfaces for damage, contamination, or excessive wear.
Connect the Titan 2418850 extension to the compatible 7/8-inch spray gun outlet. Install the appropriate tip guard and spray tip at the opposite end using the correct sealing components and manufacturer-recommended assembly procedure.
Ensure all connections are properly secured before restoring pressure. Never attempt to tighten, remove, or adjust a pressurized extension. Inspect for leakage from a safe distance using the procedures specified in the equipment manual.
During operation, maintain appropriate spray distance, gun alignment, and overlapping spray passes. The extension increases reach but does not independently change the spray tip's rated fan pattern or the sprayer's allowable pressure.
After spraying, complete the prescribed flushing and pressure-relief procedures. Clean the extension as directed for the coating material and inspect its threads and sealing surfaces before storage.
Related Titan Gun Extensions and Spray Accessories
Compare Titan extension lengths and associated spraying accessories when selecting equipment for different working heights and coating applications.
Related products are sold separately unless expressly identified as included in the purchased package.
Buy Titan 2418850 Gun Extension 10" Packaged
Upgrade your spraying reach with the Titan 2418850 10-inch aluminum gun extension. Order the replacement for Titan 651-071 from AllTitanParts and equip your compatible airless spray gun for ceiling work, elevated surfaces, and difficult-to-access painting applications.
Shop Titan 2418850 Gun ExtensionFrequently Asked Questions
Answers to common questions about Titan 2418850 compatibility, extension length, pressure rating, installation, and replacement identification.
What is Titan 2418850 used for?
Titan 2418850 is a 10-inch gun extension used to increase the working reach of compatible airless spray guns for ceilings, upper walls, soffits, and difficult-to-access coating surfaces.
Does Titan 2418850 replace Titan 651-071?
Yes. Titan 2418850 is listed as the replacement for discontinued Titan 651-071. The replacement has a specified length of 10 inches, while the older 651-071 listing describes a 12-inch extension.
Which Titan Impact sprayers can use this extension?
The replacement-part listings identify Titan Impact 340, 400, 440, 540, 640, 740, and 840 applications. Confirm that the installed spray gun has a compatible 7/8-inch connection and that the complete system meets the applicable pressure requirements.
What is the maximum pressure rating?
Titan rates its aluminum gun extension series, including part 2418850, for a maximum operating pressure of 3,600 PSI (24.8 MPa).
What thread size does Titan 2418850 use?
The extension uses a standard 7/8-inch connection for compatible airless spray guns. Confirm thread and sealing compatibility before installation.
Is the extension made from aluminum?
Yes. Titan identifies its standard gun extensions as lightweight aluminum accessories designed for practical handling during airless spraying.
Can this extension be used with other spray gun brands?
Potentially. Titan identifies its aluminum extensions as compatible with airless spray guns using standard 7/8-inch threads. Confirm the connection, tip guard, seals, and system pressure before using the extension with another brand.
Does Titan 2418850 include a spray tip guard?
Some retailer listings describe a packaged tip guard with this extension. Confirm the exact contents of the current AllTitanParts package before ordering. The spray tip itself should not be assumed included.
Can I use Titan 2418850 on a sprayer rated above 3,600 PSI?
Only when the complete system is operated at or below the extension's 3,600 PSI maximum and all other component ratings are respected. Never exceed the lowest-rated component's pressure limit.
Where can I buy Titan 2418850 Gun Extension?
Purchase the Titan 2418850 Gun Extension 10" Packaged from AllTitanParts after confirming your spray gun connection and pressure requirements.
No reviews yet. Be the first to review this product!
