-1.jpg)
OEM Titan Inlet Filtration Component
Titan 103-627 Inlet Screen is an OEM filtration component that attaches to the siphon tube end to prevent debris and contaminants from entering the fluid pump on compatible PowrTwin, PowrLiner, Hydra M, Hydra Pro, Commander, and Admiral spray systems.
Compatibility Table
Replacement inlet screen restores proper filtration, prevents pump damage from debris, and ensures reliable fluid flow.
Titan Inlet Filtration Component Replacement
Titan 103-627 is an OEM inlet screen (also known as a rock catcher) that attaches to the end of the siphon tube to filter debris and contaminants from coating material before it enters the fluid pump on compatible PowrTwin, PowrLiner, Hydra M, Hydra Pro, Commander, and Admiral spray systems. This component is also available as part number 0509762A.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | OEM Titan inlet screen that attaches to the siphon tube end to prevent debris and contaminants from entering the fluid pump. |
| Function | Provides the first line of defense against large particles that could damage pump internal components. Strains debris, fibers, and other contaminants before they enter the fluid section. The 1-1/4" suction tube size supports high-flow material transfer. A clogged screen restricts material flow, causing the pump to struggle, cavitate, or lose prime. A torn or damaged screen allows debris to enter the pump, potentially causing scoring of cylinders, piston wear, or valve damage. |
| Industrial Applications | Professional sprayer repair, siphon hose maintenance, pump protection, and rental fleet equipment servicing. |
| Compatible Titan Series | PowrTwin 4900, 6900, 8900, 12000 Plus, 12000 Plus DI, 12000GH, 12000GHD, 3500, 4500; PowrLiner 4000, 4950, 4955, 6950, 6955, 8900, 8955; Hydra M2000, M4000; Hydra Pro IV; Hydra Pro Super; Commander; Admiral; PowrCoat 730, 745, 940, 960, 975; Linecrew 1600, 750; LCX 130. |
| Accurate Part Number | 103-627 Inlet Screen (replaced by 0509762A). |
| Common Problems Solved | Pump cavitation or knocking sounds, loss of prime, reduced flow output, difficulty priming, and pump damage from debris ingestion. |
| When Replacement Is Recommended | Replace if the screen shows visible debris clogging restricting flow, tears or holes in the screen material, a bent frame compromising filtration, or if the equipment exhibits pump cavitation, loss of prime, reduced flow, or difficulty priming after inspecting for other causes. |
| Service Guidance | Regular inlet screen inspection and cleaning should be part of preventive maintenance programs. Cleaning with compatible solvent may extend life if the screen is undamaged. Replace if the screen shows tears, bent frame, or if cleaning does not restore full flow. Inspect the screen housing for damage when installing a new screen. |
| OEM & Brand Information | Genuine Titan OEM component designed for correct fitment in compatible spray systems. Also available as part number 0509762A. |
| Commercial Benefits | Restores proper fluid filtration, protects pumps from abrasive damage, ensures consistent material flow, and extends equipment service life. |
The 103-627 Inlet Screen is a critical protection component for contractors who need reliable pump performance and extended equipment life. This screen, also known as a rock catcher, is attached to the end of the siphon tube and provides the first line of defense against large particles that could damage the pump's internal components. Over time, screens accumulate dried material, fibers, and other debris that reduce flow area. A clogged screen restricts material flow, causing the pump to struggle, cavitate, or lose prime. A torn or damaged screen allows debris to enter the pump, potentially causing scoring of cylinders, piston wear, or valve damage. If the equipment exhibits pump cavitation, loss of prime, reduced flow, or difficulty priming, inspect the inlet screen for clogging or damage before returning the unit to service. Replacing a worn or clogged inlet screen with this genuine part restores proper flow, protects the pump from abrasive damage, and ensures consistent spray performance.
Quick contractor-focused answers for confirming fitment, function, and service value.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
