Titan part 0295308 is an upper spacer, 0.30 used in the fluid section or piston assembly of the SprayTech Airless EP2105 sprayer. This precision spacer sets the correct clearance between internal components, ensuring proper sealing and pump timing. Replace a worn, crushed, or missing spacer to restore correct alignment, prevent internal leakage, and maintain consistent pumping performance.
| Part Number | 0295308 |
|---|---|
| Part Description | Upper Spacer, 0.30 |
| Brand | Titan |
| Fits |
|
| Condition | New |
The Titan 0295308 Upper Spacer, 0.30 is a precision ground spacer used in the fluid section or piston assembly of the SprayTech Airless EP2105 sprayer. It establishes the correct mechanical clearance between the piston, packings, and retaining components, ensuring proper compression of seals and accurate pump timing.
A missing, crushed, or incorrect‑thickness spacer can cause pre‑mature packing failure, internal leakage, reduced pressure output, or erratic pump operation. Replacing a damaged spacer with the exact 0.30 thickness restores factory specifications, prevents fluid bypass, and extends the life of the pump packings.
| Sets piston clearance | Establishes correct preload on packings and seals |
|---|---|
| Prevents leakage | Maintains proper compression to avoid fluid bypass |
| Ensures pump timing | Critical for consistent piston stroke and pressure |
| Worn or crushed | Spacer shows deformation, cracks, or thickness reduction |
|---|---|
| Rebuilding fluid section | Always replace spacer when replacing packings or piston |
| Missing spacer | Previous repair omitted the spacer – pump will leak or stall |
| Incorrect thickness | Wrong spacer installed causing premature wear |
Titan part 0295308 is compatible with the following airless sprayer. Always confirm fitment using the correct parts diagram for your exact model.
| Brand / Model | Component |
|---|---|
| SprayTech Airless EP2105 | Upper spacer, 0.30 |
When replacing the upper spacer, these components are typically inspected or replaced at the same time.
The spacer directly affects packing compression – replace packings with the spacer.
Check the corresponding lower spacer or snap ring for wear or damage.
Inspect the piston rod and cylinder bore for scoring if the spacer failed.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
