SprayTech part 0143111 is an AirCoat Nozzle, size 11/10, used to control the spray pattern and fluid flow rate for air-assisted airless finishing. This nozzle is designed to deliver a fine finish with a specific fan width and material throughput. It is essential for achieving a smooth, professional coating on compatible SprayTech AirCoat systems.
| Part Number | 0143111 |
|---|---|
| Part Description | AirCoat Nozzle; 11/10 |
| Brand | SprayTech |
| Fits | Aircoat GM 2600 (select models) |
| Condition | New |
The SprayTech 0143111 is an AirCoat Nozzle with a size designation of 11/10. This nozzle is engineered for air-assisted airless spray guns, combining fluid delivery with air shaping to produce a fine, soft spray pattern ideal for finishing work. It is a key component for controlling material application and finish quality.
A worn, clogged, or incorrect nozzle size can cause orange peel, streaks, an uneven pattern, or improper material flow. Replacing the nozzle restores the intended spray characteristics and ensures consistent, high-quality results.
| Pattern Control | Creates a specific fan width and shape for even material distribution |
|---|---|
| Flow Rate | The 11/10 size defines the orifice to deliver a precise volume of material |
| Atomization | Works with air assistance to break up material into a fine, soft spray |
| Finish Defects | Orange peel, streaks, or an uneven, ragged spray pattern appears |
|---|---|
| Changed Pattern | Fan width is narrower or distorted compared to a new nozzle |
| Increased Pressure | Requiring higher system pressure to achieve previous flow rate |
| Visible Wear/Damage | Orifice is egg-shaped, enlarged, nicked, or shows signs of corrosion |
SprayTech part 0143111 is designed for the SprayTech AirCoat GM 2600 spray system. Always confirm fitment using the correct parts diagram for your exact model and revision.
| SprayTech Model | Component |
|---|---|
| SprayTech AirCoat GM 2600 | AirCoat Nozzle; 11/10 |
Spray performance depends on the condition of several front-end components. When servicing the nozzle, these parts are often inspected or replaced concurrently.
The needle must seal cleanly against the nozzle's internal seat to prevent leaks and drips.
Directs the shaping air around the nozzle. A clogged or damaged air cap will ruin the pattern.
Protects the nozzle orifice from debris. A damaged guard can lead to rapid nozzle wear.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
