Titan EPX2505 | Airless Sprayer Accessories
Shop Titan EPX2505 Piston Pump Accessories Parts
Equip your Titan EPX2505 airless piston pump with genuine Titan EPX2505 Piston Pump Accessories Parts from AllTitanParts. Shop the Titan 0291002 airless paint hose and Titan 0297078 F-Thread tip guard and seal assembly to maintain reliable fluid delivery and the correct spray tip mounting arrangement.
Whether you are replacing a worn spray hose or servicing your spray gun's tip guard, find the manufacturer part number, review the accessory specifications and order the components needed for your spraying setup.
Accessories Overview
Buy Titan EPX2505 Airless Spray Hose and Tip Guard Accessories
The Titan EPX2505 Piston Pump Accessories Parts category brings together components used downstream of the pump to support the spray hose and spray gun arrangement. These accessories are separate from the pump's internal drive, fluid section and filter assemblies.
The airless paint hose carries pressurized coating material from the sprayer toward the spray gun. The tip guard and seal assembly provides the designated mounting arrangement for a compatible spray tip and helps maintain the specified sealing interface.
Selecting the correct accessories is important because hose pressure ratings, thread configurations, tip guard systems and spray gun compatibility must match the equipment being used. Always check the complete spraying system before installing replacement accessories.
Genuine Titan Accessories
Titan EPX2505 Piston Pump Accessories Parts List
The following two products are listed in this category. Use their manufacturer part numbers to identify the correct replacement accessory.
| Titan Part Number | Accessory | Listed Specification | Primary Application |
|---|---|---|---|
| 0291002 | Airless Paint Hose | 25 ft × 1/4 in, red | Pressurized coating delivery |
| 0297078 | Tip Guard / Seal Assembly | F-Thread configuration | Compatible spray tip mounting and sealing |
Accessories are listed individually. Confirm hose pressure rating, connection sizes and tip guard compatibility before installation.
Featured Accessories
Find the Right EPX2505 Hose and Tip Guard Assembly
AIRLESS FLUID DELIVERY
Titan 0291002 Airless Paint Hose
The Titan 0291002 Airless Paint Hose is listed as a red, 25-foot hose with a 1/4-inch nominal diameter. It provides a flexible fluid delivery connection between compatible airless spraying components.
A correctly specified hose supports movement around the work area while carrying coating material under pressure. Inspect the hose regularly for cuts, abrasions, kinks, bulges, damaged fittings and other signs of deterioration.
Replace a damaged hose rather than attempting an improvised repair. Confirm that the hose's rated working pressure and fittings meet the requirements of the EPX2505 and the connected spray gun.
Product: Airless Paint Hose
Listed Length: 25 feet
Nominal Diameter: 1/4 inch
Listed Color: Red
SPRAY TIP MOUNTING
Titan 0297078 F-Thread Tip Guard / Seal Assembly
The Titan 0297078 Tip Guard / Seal Assembly provides a designated F-Thread mounting and sealing arrangement for compatible airless spray equipment.
The guard helps position the compatible spray tip assembly, while the sealing components help prevent leakage at the specified connection. A damaged guard, worn seal or incorrect thread arrangement may interfere with safe and reliable operation.
Before ordering, verify the spray gun's thread type and the spray tip system being used. Do not assume that all Titan tip guards, spray tips or gun connections are interchangeable.
Product: Tip Guard / Seal Assembly
Thread Configuration: F-Thread
Application: Compatible airless spray tip mounting
Spraying System Overview
How EPX2505 Accessories Support Airless Spraying
Pump Pressurizes Coating
The EPX2505 fluid section supplies pressurized coating material to the outlet system.
Hose Delivers Material
A properly rated airless hose carries coating material toward the spray gun.
Tip Guard Secures the Tip
The compatible guard and seal assembly supports correct spray tip mounting.
Spray Pattern Is Produced
The installed spray tip atomizes coating material when the gun is operated.
Accessory Compatibility Guide
Check Hose and Tip Guard Compatibility Before Ordering
The EPX2505 accessory listing identifies the hose and tip guard by their Titan manufacturer part numbers. Confirm the following before purchasing:
- Hose working pressure: The hose must meet or exceed the maximum working pressure of the applicable spraying system.
- Hose connection size: Verify the inlet and outlet fitting threads and required connection arrangement.
- Hose length: The listed Titan 0291002 hose is 25 feet long.
- Tip guard thread: Titan 0297078 is identified as an F-Thread guard assembly.
- Spray tip system: Confirm that the selected tip guard is designed for the installed spray tip and gun.
- Seal condition: Use the specified sealing components and inspect for damage before operation.
A matching brand name alone does not establish compatibility. Use the exact part number and manufacturer specifications when selecting replacement accessories.
Troubleshooting Guide
Common Titan EPX2505 Hose and Tip Guard Problems
| Problem | Component to Inspect | Recommended Check |
|---|---|---|
| Hose has cuts or abrasions | 0291002 Airless Hose | Remove damaged hose from service and replace with a properly rated hose. |
| Fluid leaks at a hose fitting | Hose fittings and connections | Relieve pressure and inspect for damaged fittings or incorrect connections. |
| Hose is kinked or restricted | 0291002 Airless Hose | Inspect for deformation or internal restriction and replace if damaged. |
| Paint leaks around the tip guard | 0297078 Guard / Seal Assembly | Inspect the seal, seating surfaces and compatible tip arrangement. |
| Tip guard will not attach correctly | 0297078 F-Thread Guard | Verify spray gun thread compatibility. Do not force mismatched threads. |
| Spray pattern is uneven | Spray tip, filter and fluid system | Inspect for a worn or blocked spray tip and other possible flow restrictions. |
Accessory Ordering Guide
How to Buy the Correct Titan EPX2505 Accessories
Confirm Your Equipment
Identify the EPX2505 pump and the connected spray gun and tip system.
Select the Accessory
Choose the 0291002 hose or 0297078 tip guard and seal assembly.
Verify Specifications
Check pressure rating, hose fittings, thread configuration and tip compatibility.
Order at AllTitanParts
Review the product details and purchase the correct OEM accessory.
Maintenance Recommendations
Maintain Your EPX2505 Hose and Tip Guard
Inspect the Hose
Check the full hose length and both fittings for damage before each spraying session.
Avoid Sharp Bends
Route the hose to minimize kinking, crushing, abrasion and contact with sharp edges.
Check Tip Guard Seals
Inspect sealing components for cuts, deformation or coating buildup.
Flush and Store Properly
Follow Titan's cleaning and storage instructions to reduce material buildup and avoidable wear.
Related EPX2505 Assemblies
Shop More Titan EPX2505 Replacement Parts
EPX2505 Piston Pump Parts
Browse the EPX2505 parts directory.
EPX2505 Main Assembly
Find fluid hoses, fittings and related pump components.
EPX2505 Filter Assembly
Shop filter elements, supports, O-rings and filter bodies.
EPX2505 PRIME/SPRAY Valve
Find bypass valve seats, seals and valve controls.
Important Airless Spraying Safety
High-pressure airless spraying equipment can cause serious fluid injection injuries. Before inspecting or disconnecting hoses, tip guards or spray gun components, lock the gun trigger, turn off the sprayer, disconnect electrical power and complete the manufacturer's pressure-relief procedure. Never use a damaged hose or attempt to stop a leak with your hand. Never operate the spray gun without the correct guard and seal assembly installed. Follow Titan's equipment instructions and use only components with appropriate pressure ratings.
Titan EPX2505 Airless Sprayer Accessories
Get the Right Accessories for Your Next Spray Job
Shop the Titan 0291002 Airless Paint Hose and Titan 0297078 F-Thread Tip Guard / Seal Assembly at AllTitanParts.
Shop EPX2505 AccessoriesFrequently Asked Questions
Titan EPX2505 Piston Pump Accessories FAQs
What accessories are listed for the Titan EPX2505 Piston Pump?
The category lists Titan 0291002 Airless Paint Hose and Titan 0297078 F-Thread Tip Guard / Seal Assembly.
How many products are listed in this category?
Two Titan accessory products are listed.
What is the Titan EPX2505 airless hose part number?
Titan 0291002 is the airless paint hose listed in the EPX2505 accessories category.
How long is the Titan 0291002 airless hose?
The listed hose is 25 feet long with a nominal diameter of 1/4 inch.
What color is the Titan 0291002 hose?
The product listing describes Titan 0291002 as a red airless paint hose.
What is the EPX2505 tip guard assembly part number?
Titan 0297078 is the listed F-Thread Tip Guard / Seal Assembly.
What does F-Thread mean for the tip guard?
F-Thread identifies the guard's specified thread configuration. Verify compatibility with your spray gun and tip system before ordering.
Can I use any airless paint hose with the EPX2505?
No. The hose must have compatible fittings and a working pressure rating suitable for the sprayer and connected equipment.
Can a damaged hose affect spray performance?
Yes. Hose damage, leaks or restrictions can interfere with fluid delivery and create serious safety hazards. Remove damaged hoses from service.
Why is paint leaking around my tip guard?
Possible causes include a damaged seal, incorrect tip assembly, worn seating surfaces or incompatible components. Relieve pressure before inspection.
Is the spray tip included with the Titan 0297078 assembly?
The category identifies the product as a tip guard and seal assembly. Confirm the product package contents before assuming a spray tip is included.
Where can I buy Titan EPX2505 Piston Pump Accessories Parts?
Shop the Titan EPX2505 Piston Pump Accessories Parts category at AllTitanParts or call 713-931-0006 for assistance.
Need Help Choosing EPX2505 Accessories?
Have your EPX2505 model, spray gun model and required accessory part number ready when contacting AllTitanParts.
713-931-0006