EP2300SE Accessories Parts

EP2300 SE Accessories & Parts

If you’re looking for genuine, model‑specific accessories for your Titan EP2300 SE sprayer, this category covers exactly what you need. These accessories ensure your machine continues to deliver professional‑grade performance, with reliable operation and safe use in high‑pressure spraying applications. Each part listed here is designed to fit the EP2300 SE and strictly matches the parts you see in our inventory.

On this page, you’ll find the following key accessories:

• Titan 0291002 Hose, PNT, ARLSS, 25 ft × 1/4 ″ Red — premium paint hose designed for the EP2300 SE’s fluid system.
  
  
• Titan 0291004 3300 PSI Whip Hose — short high‑pressure whip hose with 3/16″ diameter and 1/4″ NPSM connections.
  
  
• Titan 0297078 Tip Guard / Seal Assembly (F‑Thread) — tip guard and seal assembly compatible with the EP2300 SE’s spray output.
  
  

Selecting these accessories ensures you maintain the proper pressure ratings, compatibility and safe operation standards specified for the EP2300 SE. The official Titan/SprayTECH manual emphasizes use of rated hoses and accessories to avoid leaks, air ingestion, or degraded performance. 

Why up‑to‑date accessories matter

• Maintain fluid system integrity: Using the correct hose length and diameter (like 0291002) ensures consistent flow and pressure.
  
  
• Ensures job‑site safety: The whip hose (0291004) is rated for 3300 PSI and built for the high‑pressure environment of the EP2300 SE.
  
  
• Protect spray outlet and seal: The tip‑guard/seal assembly (0297078) prevents material blow‑back and ensures proper tip installation.
  
  
• Avoid downtime: Replacing worn or non‑rated accessories promptly helps avoid failure or maintenance delays.
  
  
• Tailored fit: These parts are explicitly listed under the EP2300 SE Accessories category — no generic or mismatched parts needed.
  
  

Maintenance & usage tips

• Inspect the hose (0291002) for signs of wear: cracking, flattening, or kinks can reduce performance or lead to failure.
  
  
• Use the whip hose (0291004) only in the correct orientation and keep connections tight; loose ends cause pressure drop or air introduction.
  
  
• Before installation of the tip guard/seal assembly (0297078), make sure the spray tip threads are clean and the guard is properly seated.
  
  
• Always ensure all accessories are rated for the EP2300 SE’s maximum pressure (up to 3000 PSI) and follow the pressure‐relief and purge steps outlined in the manual.
  
  
• Keep a log of when accessories are installed or replaced — tracking part numbers and service dates helps with maintenance planning.
  
  

FAQs

What accessories are available specifically for the EP2300 SE?

The EP2300 SE Accessories category includes the Titan 0291002 paint hose (25′×¼″ red), the Titan 0291004 high‑pressure 3300 PSI whip hose, and the Titan 0297078 tip guard/seal assembly (F‑thread). These are the only accessories listed in this category at this time.

How do I know if I need to replace the hose on my EP2300 SE?

Check the 0291002 hose for visible damage: cracks, flattening, bulging or visible wear. If you observe any of these or your spray performance drops, replacement is recommended.

Can I use a generic whip hose instead of the Titan 0291004 for the EP2300 SE?

While a generic whip hose may fit physically, it’s strongly recommended to use the rated Titan 0291004 model as it’s specified for up to 3300 PSI and matched to the EP2300 SE system. Using underspecified hoses may compromise safety or performance.

Why is the tip guard/seal assembly (0297078) necessary for the EP2300 SE?

The tip guard/seal assembly protects the spray outlet, ensures correct thread engagement and seals the tip connection. This helps prevent material blow‑back, air ingestion and ensures proper spray tip performance.

Where can I purchase these EP2300 SE accessories?

All the listed accessories for the EP2300 SE (0291002 hose, 0291004 whip hose, 0297078 tip guard/seal) are available for purchase on the AllTitanParts category page here.