SprayTech part 0291004 is a 3300 PSI whip hose used as a flexible connection between the main airless hose and the spray gun. This shorter, more maneuverable hose reduces operator fatigue and improves control. It is compatible with a wide range of Spraytech airless sprayer models.
| Part Number | 0291004 |
|---|---|
| Part Description | 3300 PSI Whip Hose |
| Brand | SprayTech |
| Fits | Spraytech Airless Advantage EPX2455; Spraytech Airless Advantage EPX2555; Spraytech Airless EP2105; Spraytech Airless EP2205; Spraytech Airless EP2300 SE; Spraytech Airless EP2300; Spraytech Airless EP2400; Spraytech Airless EP2510; Spraytech Airless EPX2305; Spraytech Airless EPX2405; Spraytech Airless EPX2455; Spraytech Airless EPX2505; Spraytech Airless EPX2555; Spraytech ED1150; Spraytech GPX 80; Spraytech GPX 85; Spraytech GPX 750; Spraytech GPX1250 |
| Condition | New |
The SprayTech 0291004 3300 PSI whip hose is a short, flexible high pressure hose designed to connect the main airless hose to the spray gun. This whip hose is rated for 3300 PSI and is intended for use with Spraytech Airless Advantage EPX2455, EPX2555, EP2105, EP2205, EP2300 SE, EP2300, EP2400, EP2510, EPX2305, EPX2405, EPX2455, EPX2505, EPX2555, ED1150, GPX 80, GPX 85, GPX 750, and GPX1250 models. The whip hose serves as a flexible extension that absorbs movement and reduces fatigue on the operator's hands and wrists during extended spraying. Its shorter length and lighter weight make it easier to maneuver around obstacles and into tight spaces compared to a full length main hose. The 3300 PSI rating matches the operating pressure of most professional airless sprayers. Over time, whip hoses can develop kinks, cuts, abrasion, or bulging that compromise safety and performance. A damaged whip hose may leak, restrict flow, or burst under pressure, creating hazardous conditions. Replacing a worn or damaged whip hose with the 0291004 restores flexibility, safety, and control. Before installation, inspect the main hose and gun fittings for damage. Route the whip hose without sharp bends or kinks. Do not exceed the rated pressure. Never attempt to repair a damaged high pressure hose with tape or clamps. Always relieve system pressure before disconnecting or inspecting the whip hose.
| Flexible gun connection | Connects main hose to spray gun with improved maneuverability |
|---|---|
| Reduces operator fatigue | |
| 3300 PSI rated |
| Cuts or abrasion | Outer cover damage exposing inner reinforcement |
|---|---|
| Kinks or crushing | |
| Bulging or swelling | |
| Leaking fittings |
SprayTech part 0291004 is a 3300 PSI whip hose compatible with the following sprayer models. Always confirm fitment using the correct parts diagram for your exact model.
| SprayTech Model | Component |
|---|---|
| Spraytech Airless Advantage EPX2455 | 3300 PSI whip hose |
| Additional compatible models: Advantage EPX2555, EP2105, EP2205, EP2300 SE, EP2300, EP2400, EP2510, EPX2305, EPX2405, EPX2455, EPX2505, EPX2555, ED1150, GPX 80, GPX 85, GPX 750, GPX1250 | |
When replacing a whip hose, these related components are often inspected or replaced at the same time.
Inspect the main hose for cuts, abrasion, or bulging at the connection point.
Check for smooth rotation and signs of leakage at the gun connection.
Replace if flattened, cracked, or missing to ensure leak free connection.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
