The PowrCoat 940 is 40:1 and rated to 4000 psi, the 960 is 60:1 and 6000 psi, and the 975 is 75:1 and 7500 psi, all on a 100 psi maximum air supply. The air motors look alike on the diagrams, but each model has its own fluid pump. AllTitanParts.com is based in Houston, Texas. Most available items are processed for shipment within about 1-2 business days, and some are ordered from the manufacturer after you order (see Shipping Info).
Where the Three Models Sit
Titan's PowrCoat series is air-powered: a compressed-air motor drives a piston fluid pump, and the ratio between the two sets how much fluid pressure you get from a given air pressure. The 940, 960 and 975 all have a 9 inch air motor with a 4.0 inch stroke, so they differ mainly in the pump they drive. The larger 1045, 1064 and 1072 use a 10 inch motor and are covered in PowrCoat 1045, 1064 and 1072 Compared. For a broader comparison of pressure, flow and air use, see PowrCoat 940 vs 960 vs 975.
Ratio, Pressure and Delivery
Ratio multiplied by air pressure gives fluid pressure: 40:1 at 100 psi is 4000 psi, 60:1 is 6000 psi and 75:1 is 7500 psi. Figures below are from Titan's specification tables; delivery is Titan's maximum, not a working figure.
| Model | Ratio | Max pressure | Max delivery | Max air volume | Weight (cart) |
|---|---|---|---|---|---|
| PowrCoat 940 | 40:1 | 4000 psi | 4 GPM | 116 CFM | 140 lbs |
| PowrCoat 960 | 60:1 | 6000 psi | 2.8 GPM | 128 CFM | 139 lbs |
| PowrCoat 975 | 75:1 | 7500 psi | 2.1 GPM | 133 CFM | 135 lbs |
Note the trade-off: as the ratio goes up, maximum pressure rises and maximum delivery falls. The 940 is not the same spec as the 960, which is a common mix-up. Your sprayer's manual and the plate on the machine are the final word on your unit.
Three Different Fluid Pumps
This is where parts differ most. On our diagrams the 940 uses the 185-551 pump (940 fluid pump diagram), the 960 uses the 155-559 pump (960 fluid pump diagram) and the 975 uses the 0533908 pump (975 fluid pump diagram).
- 940: 178-001A upper packing set, 180-002A lower packing set, 185-984A displacement rod, 182-921A piston seat assembly, 183-992 foot valve assembly.
- 960: 155-053A leather packing set, 155-982 displacement rod, 155-921 piston seat assembly, 155-932 pump cylinder.
- 975: 138-153A repacking kit, 138-917 displacement rod, 143-945A piston seat assembly, 140-991 foot valve assembly.
Do not assume a packing set or rod from one model fits another; match the part to your model's diagram. Our guide to PowrCoat fluid pumps and the 975 fluid pump breakdown go deeper.
What the Models Share
- The 850-050 minor motor service kit and the 850-500 motor service kit major are listed on the air motor diagrams for the 940, 960 and 975.
- The three air motor diagrams show the same part numbers in several places, for example the 742-913 brass valve sleeve, 743-011 valve rod assembly and 738-213 spring trip.
- Each has an automatic filter, lubricator and regulator (FRL) diagram built from the same family of parts, such as the 0533911 5 micron filter and 0533912 auto drain kit.
Read Titan PowrCoat Air Motor Parts: Models 730, 940, 960 & 975 Explained for the motor side, and confirm every part number against your own model's diagram before ordering.
Choosing Between Them
Titan lists applications for the PowrCoat series as a whole rather than per model, so the model choice comes down to the pressure and delivery you need and the tip and pressure guidance from your coating manufacturer. Higher ratios give more pressure but lower maximum delivery, and each model has its own maximum air volume to plan your compressor around. If you are unsure, call us with the coating and tip size you plan to use. The Speeflo Commander parts reference covers a different Titan air-powered line.
How to Order PowrCoat Parts
AllTitanParts.com is an Authorized Titan Dealer supplying genuine OEM replacement parts for Titan, SpeeFlo, SprayTech and Wagner equipment, based in Houston, Texas. Orders are processed on business days with a 12 pm Eastern cut-off. Most available items are processed for shipment within about 1-2 business days; some items are ordered from the manufacturer after you order, so availability shown does not always mean an item is on a shelf. Delivery dates are estimates. See Shipping Info. Call (713) 931-0006 with your model and serial number for fitment help.
Not Sure Which PowrCoat Part You Need?
Tell us your model and what you are replacing and we'll help you match the part number.
(713) 931-0006 Browse the Full PowrCoat Series