The CapSpray 105 is Titan's 5-stage electric HVLP turbine system with a 10.5 psi maximum air pressure, a 30 ft hose with a 5 ft whip, a Maxum Elite gun and a #4 pro set. Titan says it atomizes thick latex, enamels and varnishes with little or no thinning. A 230V version is listed as 276047.
What the 105 is
The CapSpray 105 is a turbine system: a corded 5-stage turbine makes the atomizing air, a hose carries that air to a spray gun, and a cup on the gun holds the coating. It is a fine-finish tool for cabinets, furniture, trim and similar work, not a pump that pushes fluid at high pressure. This is what Titan's page gives for the 105:
CapSpray 105 specifications as Titan lists them
| Item | CapSpray 105 |
|---|---|
| Turbine | 5-stage |
| Maximum air pressure | 10.5 psi |
| Air hose in the box | 30 ft, plus a 5 ft whip hose |
| Gun in the box | Maxum Elite |
| Pro (projector) set in the box | #4 |
| Part number on our site | 0524033, CapSpray 105 With Maxum Elite Gun |
We do not list a weight or an amperage here. Weights quoted for the classic CapSprays differ between sources, so check your manual for current draw and the specification label on the unit.
A pro set is the needle, fluid nozzle and air cap that go together in the gun. The #4 that comes with the 105 is the set you start with, and larger numbers are larger nozzle openings. If your coating needs a different set, that is a separate part, not something the turbine controls.
The 230V version
Titan lists a CapSpray 105, 230V under part number 276047, with the same specifications as the standard unit. That version is not one of the parts we list on the site, so if you need a 230V machine or parts for one, call (713) 931-0006 with the model and serial number before ordering.
Be careful with electrical parts in particular. Our diagram names for the warning light and the turbine on the 105 pages carry a 120V label, and we have no confirmation either way of whether 230V units use the same electrical parts. Do not assume a part fits because the 105 name matches; ask first.
What Titan says it sprays
Titan's wording for the 105 is that it can atomize thick latex or solvent-based paints, enamels or varnishes with little or no thinning, and it calls the machine a remarkably lightweight workhorse. Its listing also names cabinets, furniture and workshops as the work it is aimed at. Titan describes the X 105 in similar terms, as the one for larger projects with heavier-bodied coatings.
Two honest limits. Titan does not publish a maximum viscosity or a seconds-per-cup figure for the 105, so use the viscosity cup and the chart in your manual to check a coating before you spray it. And "little or no thinning" is not "never thin": follow the coating maker's instructions on any thinning.
Features
Titan lists the same feature set across the CapSpray line, and the 105 has all of it:
- Transfer efficiency of up to 90%, which is Titan's figure for how much of the coating lands on the work.
- A high-performance, automotive-type air filter for clean atomizing air and a consistent fan pattern, with a pre-filter on both the atomizing-air and cooling-air sides.
- A warning light on the front panel for dirty filters. Titan's manuals say the light comes on when air flow drops and does not shut the turbine down, so it is a prompt to clean or change the filters.
- An onboard toolbox for needles, nozzles, air caps and the nozzle wrench, plus a built-in holder for the gun and cup.
- Sound reduction technology. Titan gives no decibel figure, so we do not either.
105 parts by assembly
Our catalog splits the 105 into four diagram pages. Open the one that matches the part you want, find the numbered callout and add it. These are the parts people most often look up on each page:
CapSpray 105 diagram pages
| Assembly | Key parts | What it covers |
|---|---|---|
| Main Assembly | 0524027, 0524041, 0524526A, 0524523A, 0524528A | The two Maxum guns, pre-filter kit, pleated air filter, turbine motor air filter, silencers, filter can and cover, viscosity cup |
| Turbine Assembly | 0524280A, 0277243 | The 5-stage turbine assembly, motor brush kit, spacers, seals and can cover |
| Upper Housing | 0524553, 0524549, 0277472, 0524547 | On/off switch, 15A circuit breaker kit, air flow switch, warning light, handles, toolbox |
| Lower Housing | 0524592, 9881911 | Power cord assembly, exhaust hose and fitting, hose clip, foot pads |
The Main Assembly page lists both the Maxum Elite (0524027) and the Maxum II (0524041) guns. The 105 ships with the Elite, so the Maxum II entry is a replacement option, not the gun in your box.
Two wear items are worth knowing by name. The 0277243 motor brush kit sits on the turbine page, and Titan's manuals say to have the motor brushes checked by an authorized service center every 400 hours. The filter side is the other: the 0524526A pre filter kit and the 0524523A pleated air filter are on the Main page. Titan's manuals warn that clogged filters cause excessive heat and can damage the turbine, so a light that stays on is worth acting on.
X 105 sister model
Titan also makes a CapSpray X 105 (part number 2458990). It has the same 5-stage turbine and 10.5 psi maximum, a 30 ft hose with a 5 ft whip and a Maxum II gun, but adds the CapLiner System: a reusable cup with disposable lids and liners. Its box holds pro sets #3 and #4. It has its own set of four diagram pages, starting from the CapSpray X series page.
Before you order a 105 part
Confirm the model and voltage
Check the label on the unit: 105, whether it is the standard or the 230V version, and the serial number.
Open the right assembly page
Use the table above. Filters and guns are on Main, the turbine and brushes on Turbine, switches and the warning light on Upper, the cord and exhaust hose on Lower.
Match the callout
Find the numbered callout and add the part. The product pages carry the exact part number and fitment note.
Check the manual or call
Manuals are on our manuals page. For fitment questions or a 230V unit, call (713) 931-0006.
Parts from the CapSpray 105 diagrams:
The Short Version
The 105 is a 5-stage, 10.5 psi HVLP turbine system that Titan positions for thick latex, enamels and varnishes with little or no thinning. The standard unit is 0524033 on our site, the 230V version is 276047 and needs a phone call, and every part you will replace is on one of four diagram pages.
Not sure which 105 diagram has your part?
Call (713) 931-0006 with your model and serial number, and our parts team will confirm the part before you order.
(713) 931-0006Order by Parts Diagram