SC-6+ Reversible Tips

Shop Genuine OEM Titan SC-6+ Reversible Tips

Shop genuine OEM Titan SC-6+ Reversible Tips, Titan’s 662-series standard reversible airless spray-tip family. Titan promotes SC-6+ technology around its long-lasting orifice, more usable tip life, consistent film thickness, less wasted paint and a fan pattern up to 22% wider. The manufacturer chart spans .007 through .055-inch orifices and nominal 2–4 through 16–18-inch fan groups, giving contractors a broad selection range. Choose by coating requirement, desired fan width, orifice, nominal flow, sprayer capacity and the exact 662-series part number—not by guard fit alone.

Why Contractors Choose Titan SC-6+ Tips

Titan describes the SC-6+ reversible tip as having its industry’s longest-lasting orifice and a fan pattern up to 22% wider. Titan also links the long-lasting orifice to more usable tip life, consistent film thickness and less wasted paint. These are manufacturer performance claims and should be considered together with the exact tip size, coating and equipment being used.

Titan SC-6+ Maximum Working Pressure

Titan’s full-line and protective-coatings technical charts rate the 662-series SC-6+ Reversible Tip at 5,000 PSI / 34.5 MPa maximum working pressure. This is a component limit—not a recommendation to spray at 5,000 PSI.

Titan 662-Series SC-6+ Reversible Tip Size Chart

Use Titan’s published SC-6+ size matrix to identify manufacturer-listed combinations. A blank combination in the manufacturer chart should not be converted into an assumed part number.

Titan’s published matrix is the authority for valid fan-width/orifice combinations. Do not infer an unlisted 662 part number from the numbering pattern.

Titan SC-6+ Orifice & Flow Guide

Titan publishes nominal flow by orifice for the 662-series SC-6+ family. Flow demand rises sharply as the opening becomes larger, so the sprayer must have sufficient delivery and maximum-tip capacity for the selected size.

How to Read Titan SC-6+ Tip Sizes

Titan’s published chart should be the authority for the actual nominal fan-width range. The final two digits of standard examples correspond to the nominal orifice in thousandths of an inch: a 417 uses a .017-inch orifice, a 517 uses a .017-inch orifice and a 617 also uses a .017-inch orifice. Their manufacturer-listed fan groups differ.

Choosing SC-6+ Orifice Size Within the Same Fan Width

The 4xx group demonstrates why fan width and orifice are separate buying decisions. Titan lists 415, 417, 419, 421 and 423 in the same nominal 8–10-inch fan group, but each has a different opening and material-flow requirement.

Choosing Fan Width While Keeping the Same Orifice

Titan also lists the .017-inch opening across multiple fan groups. This lets the contractor select nominal spray width separately from the basic material-opening requirement.

Match the SC-6+ Tip to the Coating

The 662-series covers an unusually broad orifice range, so a family-level statement cannot determine the correct tip for every coating. Start with the coating manufacturer’s recommended airless-tip opening, then select the required fan width from Titan’s valid SC-6+ combinations.

Do not assume that every .007–.055-inch SC-6+ size is appropriate for latex, stains, primers, enamels or protective coatings merely because those materials can be sprayed with some airless equipment. Material viscosity, solids, filtration and manufacturer application instructions matter.

SC-6+ Guard Fit Does Not Mean Universal Sprayer Compatibility

Titan states that SC-6+ tips fit all Titan and most industry-standard spray-gun guards. This describes the tip/guard interface. It does not mean that every Titan or non-Titan sprayer has enough output or maximum-tip capacity to operate every 662-series size.

Can My Titan Airless Sprayer Support This SC-6+ Tip?

Compare the selected SC-6+ opening with the exact sprayer’s published maximum tip size and output. Titan’s full-line specifications illustrate why this check matters: machine capability varies substantially across airless sprayer models.

These machine specifications illustrate capacity only; they are not a universal fitment declaration for every SC-6+ tip, gun, guard or coating configuration.

Titan SC-6+ Reversible vs SC-6+ Fine Finish Tips

A standard 662-series SC-6+ tip should not be relabeled as a 671-series Fine Finish tip merely because a particular job requires a smooth finish. The two families have different manufacturer-defined matrices and application positioning.

Which Titan Spray Tip Technology Should I Choose?

Titan SC-6+ Pressure, Gun, Guard & Hose Requirements

The SC-6+ tip’s 5,000 PSI rating does not raise the rating of another component. For example, Titan documents spray guns and sprayers with lower maximum operating pressures, while separate high-pressure accessories can carry higher ratings.

SC-6+ Category Product-Data Audit

The current AllTitanParts category contains a broad 662-series assortment that substantially follows Titan’s published SC-6+ matrix, but product-data normalization is important before using store listings as technical authority.

Recommended SC-6+ Product-Title Structure

Where the manufacturer identity and current part number support it, use a consistent ecommerce pattern such as Titan 662-517 SC-6+ 517 Reversible Spray Tip. Keep the exact Titan part number first enough to support part-number searches, but never alter an official replacement number, suffix or package identity merely to make titles uniform.

When Should You Replace a Titan SC-6+ Tip?

Spray tips are wear components. Titan specifically promotes the SC-6+ long-lasting orifice around maintaining useful tip life, consistent film thickness and reduced paint waste. Inspect the tip when the fan pattern or coating delivery no longer performs as expected after normal cleaning and system checks. A worn opening can increase material delivery and change the pattern. Replace a worn tip rather than compensating indefinitely with higher pressure. Tip life varies with coating abrasiveness, pressure, filtration and operating conditions, so use condition and spray performance rather than an invented universal gallon interval.

How to Order the Correct Titan SC-6+ Reversible Tip

1. Identify the coating and application.
2. Check the coating manufacturer’s recommended airless-tip orifice range.
3. Determine the desired nominal fan width.
4. Use Titan’s current SC-6+ chart to identify valid 662-series combinations.
5. Check Titan’s published nominal flow for the selected orifice.
6. Verify the sprayer’s maximum delivery/output.
7. Verify the sprayer’s maximum supported tip size.
8. Confirm the exact spray gun and compatible guard.
9. Verify complete-system pressure ratings.
10. Locate the exact 662-series Titan part number.
11. Check current suffix, replacement or supersession information where applicable.
12. Order only after the complete coating, tip and equipment relationship is confirmed.

Shop Titan Airless Spray Tip Technologies

Compare the correct Titan tip family before choosing an individual size. Each family has its own manufacturer-defined technology and selection matrix.

Start with the coating manufacturer’s recommended orifice, then choose the fan width. For example, Titan lists 415, 417, 419, 421 and 423 in the same 8–10-inch fan group, but nominal flow rises from 0.24 GPM at .015 inch to 0.57 GPM at .023 inch. Conversely, 317, 417, 517 and 617 all use a .017-inch opening and Titan lists the same 0.31 GPM nominal flow, while their fan groups increase from 6–8 to 12–14 inches. This is why both fan width and orifice must be selected before checking machine capacity.

FAQ Section

Use these answers to narrow the correct Titan SC-6+ configuration before ordering.