Titan 662-629 Sc-6 plus 629 reversible tip
TITAN SC-6+ REVERSIBLE AIRLESS SPRAY TIP
Titan 662-629 SC-6+ 629 Reversible Tip is a professional airless spray tip with a .029-inch orifice and 12–14-inch nominal fan pattern. Its reversible design clears tip clogs quickly while supporting high-output application of compatible heavier architectural and protective coatings.
The 629 size combines a broad 12–14-inch fan with a high-flow .029-inch orifice. Titan rates the .029-inch SC-6+ orifice at approximately 0.91 GPM (3.44 LPM) using its published tip-flow reference. Confirm that your airless sprayer can support a .029-inch tip before ordering.
TITAN SC-6+ REVERSIBLE AIRLESS SPRAY TIP
Titan 662-629 SC-6+ 629 Reversible Airless Spray Tip
Equip high-output airless applications with genuine Titan 662-629, an SC-6+ reversible spray tip combining a .029-inch orifice with a 12–14-inch nominal fan pattern for broad, productive coating coverage and fast clog clearing without removing the tip from the gun.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | Titan 662-629 is an SC-6+ professional reversible airless spray tip. Tip size 629 combines a .029-inch fluid orifice with a nominal 12–14-inch (305–356 mm) fan pattern. Titan designs the SC-6+ family for professional airless spraying with a long-lasting orifice, consistent film application and a reversible tip body for rapid clearing of obstructions. |
| Function | The tip meters pressurized coating through its precision .029-inch orifice and shapes the discharged material into a broad 12–14-inch nominal spray fan. If material obstructs the orifice, the operator can rotate the reversible tip into the cleaning position, trigger the gun briefly to clear the obstruction, return the tip to the spray position and resume application. |
| Industrial Applications | The large .029-inch orifice and broad fan make this tip appropriate for high-output professional applications using compatible coatings. Typical work can include large residential and commercial surfaces, exterior coating, industrial maintenance and other production applications where the coating manufacturer recommends a .029-inch airless tip. Material compatibility must be confirmed for the specific coating being sprayed. |
| Accurate Compatible Titan Machines | The SC-6+ tip system fits Titan spray-gun guards and many industry-standard airless guards. Machine compatibility is determined primarily by the sprayer's maximum supported tip size and required coating output rather than by the 662-629 number alone. Use only on an airless sprayer capable of supporting a .029-inch tip at the required operating conditions; smaller-output Titan sprayers may not support this size. |
| Accurate Part Number | Titan 662-629. The SC-6+ numbering communicates the primary spray geometry: the first digit “6” identifies the nominal 12–14-inch fan-width class, while “29” identifies the .029-inch orifice. Titan's published chart lists the 629 configuration at 12–14 inches (305–356 mm) with a .029-inch orifice. |
| Compatible Parts & Assemblies | Designed for use with compatible Titan SC-6+ reversible-tip guard assemblies and airless spray guns. Titan states that SC-6+ tips fit all Titan and most industry-standard guards. The tip should be installed with the correct tip guard and sealing components, with all components rated for the operating pressure of the airless system. |
| Related Parts Commonly Serviced Together | When replacing a worn 662-629, inspect the reversible tip guard, tip seat and seal, spray-gun filter, manifold or machine filter, gun and high-pressure hose. A partially restricted filter can reduce coating delivery, while a worn seat or seal can contribute to leakage around the tip assembly. Match filter mesh and system components to the coating manufacturer's requirements. |
| Common Problems Solved | Replacing a worn airless tip can restore a more controlled spray pattern, improve coating-transfer efficiency and reduce the excess paint consumption associated with an enlarged worn orifice. The reversible design also minimizes downtime caused by temporary tip blockages because many obstructions can be cleared at the gun without removing and disassembling the tip. |
| Use with Coating Systems | Titan's SC-6+ chart lists approximately 0.91 GPM (3.44 LPM) reference flow for the .029-inch orifice and a maximum working pressure of 5,000 PSI (34.5 MPa) for the SC-6+ series. Actual paint flow depends on coating viscosity, operating pressure, equipment capability and other system conditions. Always follow the coating manufacturer's recommended airless tip size and pressure range. |
| OEM & Brand Information | 662-629 is a genuine Titan SC-6+ reversible airless spray-tip part number. Titan promotes the SC-6+ series for increased usable tip life, consistent film thickness and reduced paint waste compared with worn conventional tips. Manufacturer literature also describes the SC-6+ fan pattern as up to 22% wider and confirms compatibility with Titan and most industry-standard tip guards. |
| Commercial Benefits | For contractors spraying compatible higher-output coatings, the 662-629 combines a broad 12–14-inch fan with substantial .029-inch material capacity to cover larger surfaces efficiently. Its reversible design reduces clog-related downtime, while the replaceable SC-6+ format allows contractors to restore spray performance without replacing the gun or complete airless system. |
Contractor Selection Insight
Choose the 629 size when you specifically need a .029-inch orifice combined with a broad 12–14-inch fan. This is a high-output tip, so do not select it only because you want wider coverage. First confirm that your Titan airless sprayer supports at least a .029-inch tip and that your coating manufacturer recommends this orifice size. For lower-output sprayers or thinner coatings, a smaller SC-6+ orifice may provide better control.
FAQ Section
Key answers for contractors selecting the Titan 662-629 SC-6+ tip.
No reviews yet. Be the first to review this product!
