Titan 840ix Filter Assembly Parts (P/N 800-900)
Restore reliable filtration and fluid-system operation with genuine Titan 840ix Filter Assembly Parts for assembly 800-900. Shop OEM filter housings, manifold filters, filter springs, screen adapters, O-rings, plugs, PrimeSpray valve components and pressure transducer assemblies. Find the correct replacement part using the numbered Titan 840ix exploded parts diagram.
Buy Genuine Titan 840ix Filter Assembly Replacement Parts
The Titan 840ix Filter Assembly is an important part of the airless sprayer's fluid-delivery system. Its manifold filter helps capture unwanted particles before coating material travels farther through the spray system, reducing the likelihood of debris-related restrictions and spray tip blockages.
The assembly also includes supporting components such as filter housings, springs, seals and fittings. The associated PrimeSpray valve assembly and pressure transducer perform separate fluid-routing and pressure-sensing functions within the same illustrated assembly.
AllTitanParts lists 11 replacement components for the Titan 840ix Filter Assembly P/N 800-900. Browse the numbered parts diagram to identify the exact OEM component required for maintenance or repair.
Find the Correct Titan 840ix Filter Assembly Part
Confirm Your Sprayer
Verify that your equipment is the Titan 840ix airless sprayer and identify the applicable filter assembly.
Locate Assembly 800-900
Use the numbered exploded diagram to locate the component requiring replacement.
Match the OEM Part Number
Match the diagram callout to the corresponding Titan part number and product description.
Verify Before Ordering
Confirm fitment, part number, quantity and any related sealing or mounting components.
Titan 840ix Filter Assembly OEM Parts and Numbers
Explore the 11 individual components listed for assembly 800-900. Use the exact OEM part number to identify the replacement you need.
Titan 800-705 Filter Housing
Replacement filter housing for the applicable assembly. Listed as replacing Titan 800-905.
Part Number: 800-705Titan 14058 Filter Spring
Replacement spring used within the applicable filter assembly to support proper component positioning.
Part Number: 14058Titan 730-067 60 Mesh Manifold Filter
A 60 mesh filter screen designed to capture particles from coating material as it passes through the manifold filtration system.
Part Number: 730-067Titan 702-251 Filter Screen Adapter
An OEM adapter that supports the specified filter screen connection within the assembly.
Part Number: 702-251Titan 757-105 Filter Support Spring
Provides spring support for the applicable filter components within the manifold assembly.
Part Number: 757-105Titan 800-906 PTFE O-Ring
A PTFE sealing component used at its specified location in the filter assembly.
Part Number: 800-906Titan 227-033 Pipe Plug
OEM pipe plug for closing the designated threaded opening in the assembly.
Part Number: 227-033Titan 800-901 Filter Base Housing
The filter base housing forms part of the assembly's structural fluid-routing arrangement.
Part Number: 800-901Titan 700-258 PrimeSpray Valve Assembly
Replacement valve assembly used to control the applicable prime and spray fluid-routing functions.
Part Number: 700-258Titan 800-907 NPTF Plug
Replacement threaded plug for its designated location in the filter assembly.
Part Number: 800-907Titan 800-437 Transducer Assembly
A pressure-sensing assembly used by the applicable sprayer control system to monitor fluid pressure.
Part Number: 800-437How the Titan 840ix Filter Assembly Works
Material Filtration
The manifold filter captures particles that could otherwise contribute to spray tip blockages.
Filter Support
Springs and adapters help retain the filter components in their specified positions.
Fluid Sealing
O-rings, plugs and housing connections help maintain the integrity of the pressurized fluid path.
Pressure Monitoring
The transducer measures fluid pressure for the sprayer's associated control system.
Maintain Your Titan 840ix Filter Assembly
Proper filter maintenance helps limit material restrictions, prevent avoidable blockages and identify worn sealing components before they develop into larger problems. Always follow Titan's approved service procedures.
1. Inspect the Filter
After safely relieving pressure, inspect the 730-067 manifold filter for accumulated debris or damage.
2. Check Springs and Adapter
Inspect the 14058 spring, 757-105 support spring and 702-251 adapter for wear or deformation.
3. Inspect Sealing Surfaces
Examine the O-ring, plugs and mating housing surfaces for damage or evidence of leakage.
4. Reassemble Correctly
Use the assembly diagram and service instructions to confirm correct component placement and installation.
Common Titan 840ix Filter Assembly Problems
Use these symptoms to identify components requiring inspection. Similar symptoms can originate elsewhere in the sprayer, so confirm the actual fault before ordering.
| Problem | Parts to Inspect | Recommended Action |
|---|---|---|
| Restricted Material Flow | 730-067 Manifold Filter | Inspect for accumulated material, contamination or filter damage. |
| Leak Around Filter Housing | 800-906 O-Ring, 800-705 Housing, 800-901 Base | Locate the leak and inspect seals, mating surfaces and housing condition. |
| Filter Not Properly Supported | 14058 Spring, 757-105 Support Spring, 702-251 Adapter | Check for damaged, missing or incorrectly positioned components. |
| Prime or Spray Routing Problem | 700-258 PrimeSpray Valve Assembly | Inspect the valve and related fluid-routing components according to the service manual. |
| Pressure Reading or Control Issue | 800-437 Transducer Assembly and related control connections | Diagnose the pressure-sensing and control system before replacing the transducer. |
| Leak at Threaded Opening | 227-033 Pipe Plug, 800-907 NPTF Plug | Identify the affected opening and verify the correct plug and sealing procedure. |
Verify Titan 840ix Filter Assembly Compatibility
Assembly number 800-900 identifies the filter assembly illustrated in this category. Individual replacement components have their own OEM part numbers.
The catalog lists Titan 800-705 Filter Housing as replacing Titan 800-905. Verify this replacement relationship and the applicable machine configuration before ordering.
Do not assume that filters, housings, springs, valves or transducers from another Titan model are interchangeable based only on appearance. Confirm the part number, diagram callout and required quantity.
Before Ordering Titan 840ix Filter Assembly Parts
Verify the exact Titan sprayer model.
Use the correct filter assembly diagram.
Check seals, springs, adapters and housing surfaces.
Compare the diagram callout with the OEM listing.
Confirm the number of replacement parts required.
Explore Titan 840ix Parts and Assemblies
Relieve Pressure Before Servicing the Titan 840ix Filter
Shut down the sprayer, disconnect the electrical supply and follow the complete manufacturer's pressure-relief procedure before removing the filter housing, screen, plugs, valve components or transducer. Never loosen pressurized fluid connections. High-pressure fluid injection can cause serious injury. Follow the applicable Titan service manual during cleaning, reassembly and testing.
Order Titan 840ix Filter Assembly Parts Online
Shop genuine Titan manifold filters, filter housings, springs, O-rings, adapters, plugs, PrimeSpray valves and transducer components. Use the P/N 800-900 exploded diagram to find the correct replacement.
Shop Titan 840ix Filter Assembly PartsTitan 840ix Filter Assembly Parts FAQ
What is the Titan 840ix Filter Assembly P/N 800-900?
P/N 800-900 identifies the filter assembly illustrated for the Titan 840ix. It includes filtration components and associated fluid-system parts.
How many replacement parts are listed for the assembly?
AllTitanParts lists 11 replacement components for the Titan 840ix Filter Assembly P/N 800-900.
Which manifold filter is listed for the Titan 840ix?
Titan 730-067 is the listed 60 Mesh Manifold Filter. Confirm its diagram position before ordering.
Which filter housing replaces Titan 800-905?
Titan 800-705 Filter Housing is listed as replacing Titan 800-905. Verify compatibility with your assembly before purchasing.
What is the filter base housing part number?
Titan 800-901 is the listed Filter Base Housing for this assembly.
What causes a Titan 840ix manifold filter to clog?
Paint particles, dried coating material and other debris can accumulate in the filter screen. Follow the manufacturer's cleaning and inspection instructions.
Which PrimeSpray valve assembly is listed?
Titan 700-258 PrimeSpray Valve Assembly is included in the P/N 800-900 parts listing.
What is the transducer assembly part number?
Titan 800-437 Transducer Assembly is listed for the filter assembly. Diagnose the pressure-control system before replacing it.
How do I order the correct Titan 840ix filter part?
Confirm your sprayer model, locate the required component on the P/N 800-900 diagram and match its callout to the exact OEM part number and quantity.
Need Help Finding a Titan 840ix Filter Assembly Part?
Have your Titan 840ix model information, assembly number 800-900 and diagram callout ready. Our parts team can help identify the correct replacement.
Parts and Fitment Help: 713-931-0006