Titan part 0297051 is a Check Valve Repair Kit for compatible HVLP spray guns. This kit contains the critical internal components - typically the ball, seat, and spring - that form the gun's check valve. This valve is responsible for stopping fluid flow when the trigger is released, preventing drips and ensuring a clean, instant spray cutoff.
| Part Number | 0297051 |
|---|---|
| Part Description | Check Valve Repair Kit |
| Brand | Titan (SprayTech) |
| Fits | SprayTech HVLP Maxum II |
| Condition | New, OEM |
The Titan 0297051 is a genuine OEM Check Valve Repair Kit specifically for the SprayTech HVLP Maxum II spray gun. This kit includes the core components needed to rebuild the gun's internal check valve mechanism. The check valve is the primary seal that shuts off fluid flow at the nozzle when the trigger is released, and is essential for preventing post-trigger drips and ensuring a crisp, professional finish.
The ball and seat inside the check valve are wear items. Over time, they can become scored, corroded, or clogged with dried material, causing the gun to leak or drip from the air cap after spraying. Replacing these components with the Titan 0297051 kit restores a positive seal, eliminates messy drips, and is one of the most common and effective repairs for restoring gun performance.
| Instant Fluid Shut-off | Seals the fluid passage the moment the trigger is released to stop paint flow instantly. |
|---|---|
| Drip Prevention | Prevents paint from dripping out of the air cap or nozzle after spraying, which ruins finishes. |
| Pressure Maintenance | Helps maintain system pressure by preventing fluid from draining back when the gun is not in use. |
| Tip Drip / Leakage | Paint drips or runs from the air cap after the trigger is released, even with a clean tip. |
|---|---|
| Poor Cut-off | The spray pattern does not stop cleanly, resulting in tails or streaks at the end of a stroke. |
| Routine Maintenance | Rebuilding the gun as part of a scheduled service or after a period of heavy use. |
| Contamination | Debris or dried paint has damaged the sealing surface of the existing ball and seat. |
The Titan 0297051 Check Valve Repair Kit is designed for a specific series of professional HVLP sprayers. It is the correct repair kit for the following model:
| Compatible Sprayer Series | Specific Model |
|---|---|
| SprayTech HVLP Maxum Series | SprayTech HVLP Maxum II |
This kit is listed specifically for the HVLP Maxum II model. For other models in the Maxum series or different HVLP guns, please verify the correct part number.
When servicing the check valve, it is often practical to inspect and potentially replace these other common wear items in the spray gun.
The packing that seals around the fluid needle shaft. If leaking from the trigger area, this packing may need replacement.
For guns with air flow or trigger control issues, a kit for the air valve may be needed separately.
The spray tip and air cap are consumable wear items that directly affect pattern quality and should be inspected.
A clean internal gun filter protects the new check valve components from debris that could cause rapid wear.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
