Please wait while we process your order...

Product successfully added to your cart.
Placeholder Image

Quantity in Cart: 1

Continue Shopping Shopping Cart
Item removed from Cart
X
 
×

AllTitanParts

(713) 931-0006

Titan 0509926 Gpx750 Clutch Set-Up Tool

Titan 0509926 Gpx750 Clutch Set-Up Tool

Sourced From:
Titan Tools Inc.

 

Titan part 0509926 is a clutch set-up tool used to properly position the clutch armature during service on compatible SprayTech sprayers. When servicing the clutch assembly, precise spacing between the clutch armature and housing is critical for proper engagement and wear prevention. This specialized tool ensures correct alignment and gap setting during clutch replacement or adjustment.

Part Number 0509926
Part Description Clutch Set-Up Tool
Brand SprayTech
Fits SprayTech GPX 750, GPX 80, GPX 85, LCX 750
Condition New
Compatible Models:
  • SprayTech GPX 750
  • SprayTech GPX 80
  • SprayTech GPX 85
  • SprayTech LCX 750

Retail Price: $88.9
You save: $7.38 (8.30%)
Our Price: $81.52

 

Clutch Set-Up Tool for SprayTech GPX and LCX Series Sprayers

The Titan part 0509926 Clutch Set-Up Tool is a specialized service tool required for proper clutch armature positioning during clutch replacement on compatible SprayTech sprayers. This tool is positioned across the face of the clutch housing so that the center, recessed portion straddles the clutch armature assembly, ensuring correct spacing before tightening the set screws.

Proper clutch alignment is critical for even wear, maximum clutch life, and reliable sprayer operation. Without this precision tool, achieving the correct air gap between the clutch armature and rotor is nearly impossible, leading to premature clutch failure, slippage, or engagement issues.

???? Service Requirement: When servicing SprayTech GPX and LCX series sprayers, use of the clutch set-up tool is specified for positioning the clutch armature on the engine shaft. The procedure requires holding the tool across the clutch housing face while pulling the armature against the tool, then tightening set screws alternately to the specified torque.

What it does and when to use it

What the clutch set-up tool does
Precision spacing Positions clutch armature at correct distance from clutch housing
Alignment gauge Ensures armature is square and centered on engine shaft
Service essential Required tool for proper clutch replacement procedure
Wear prevention Prevents uneven clutch wear and premature failure
When the tool is required
Clutch armature replacement Required when installing new clutch armature assembly
Clutch rotor service May be needed after rotor replacement to verify spacing
After engine removal Re-alignment needed when engine or clutch housing is disturbed
Performance issues Clutch slippage or engagement problems may require re-gapping

Compatibility

Titan part 0509926 is designed specifically for the following SprayTech models. The tool is documented for use on these models and is compatible with others sharing the same clutch design.

Model Series Compatibility
SprayTech GPX 750 ✓ Compatible
SprayTech GPX 80 ✓ Compatible (same clutch design)
SprayTech GPX 85 ✓ Compatible (same clutch design)
SprayTech LCX 750 ✓ Compatible (same clutch design)

Parts commonly serviced with this tool

When using the clutch set-up tool, these clutch components are typically being replaced or serviced.

Clutch armature assembly

Primary component positioned by the tool. Should be replaced with clutch rotor for even wear.

Clutch rotor

Should be replaced simultaneously with armature for maximum clutch life.

Taper lock bushing & set screws

Secures armature to engine shaft; requires blue Loctite and specific torque.

Frequently Asked Questions

After installing the clutch armature on the engine shaft with set screws loosely engaged, position the 0509926 tool across the face of the clutch housing so that the center, recessed portion straddles the clutch armature assembly. Pull the clutch armature assembly toward the tool until the face of the armature contacts the tool. While holding it against the tool, alternately tighten the two set screws to the specified torque (typically 65–75 in/lbs) using an 1/8" hex wrench with blue Loctite applied.

While improvised methods might seem possible, using the correct 0509926 tool is strongly recommended. The tool ensures precise, consistent spacing that is difficult to achieve with makeshift gauges. Incorrect gap setting can cause: 1) Premature clutch wear, 2) Clutch slippage under load, 3) Harsh engagement, or 4) Complete clutch failure. The tool is specifically designed to the exact specifications required for proper clutch operation.

Yes, the 0509926 clutch set-up tool is designed to work across multiple SprayTech platforms sharing similar clutch designs. The tool is applicable to the GPX 750, GPX 80, GPX 85, and LCX 750 which utilize the same clutch armature and housing configuration. Always verify with your specific model's service documentation before use.

Key steps include: 1) Always replace the clutch rotor when replacing the armature for even wear, 2) Apply blue Loctite to set screws before final tightening, 3) Torque set screws to the specified value alternately, 4) Ensure friction surfaces are clean and free from oil or grease, and 5) After reassembly, have the sprayer re-calibrated at an authorized service center.

Copyright © 2024 AlltitanParts.com - All Rights Reserved.

Payment Methods