GPX 80 Filter Assembly

Titan 0508451 30 Mesh Filter ( can be ordered as Titan 730-067-30)

Item No: 3

Part #: 508451

Titan 0508451 is a 30 Mesh Manifold Filter (Coarse) is replaced by Titan 730-067-30, it is designed ...

$21.86

Discontinued by Manufacturer

Titan 0508452 100 Mesh Filter (can be ordered as Titan 730-067-10)

Item No: 3

Part #: 0508452

Titan 0508452 100 Mesh Filter is same as Titan 730-067-10 Mesh Filter Fits: ProSpray 3.39

$0.00

Discontinued by Manufacturer

Titan 0507737 Pressure Sensor Assembly

Item No: 7

Part #: 0507737

Advantage / SprayTech part 0507737 is a pressure sensor assembly used in the electronic pres...

Retail Price: $326.10

You save: $47.61 (14.60%)

Our Price: $278.49

QTY:

Titan 227-033 Pipe Plug

Item No: 8

Part #: 227-033

Part 227-033 is a replacement pipe plug for a wide range of compatible spray equipment. This plu...

$5.40

QTY:

Titan 0555625 Housing, Filter/Bypass Sensor

Item No: 12

Part #: 0555625

Advantage / SprayTech part 0555625 is a housing for filter/bypass sensor designed to e...

Retail Price: $362.20

You save: $52.88 (14.60%)

Our Price: $309.32

QTY:

Titan 0507690 Bypass Valve Assembly

Item No: 13

Part #: 0507690

SprayTech part 0507690 is a bypass valve assembly used in a wide range of airless pain...

Retail Price: $137.30

You save: $14.28 (10.40%)

Our Price: $123.02

QTY:

Buy GPX 80 Filter Assembly OEM Replacement Parts Online

The GPX 80 Filter Assembly is a critical fluid filtration system designed to maintain clean coating flow and stable spray pressure within the Titan GPX 80 gas piston pump. This assembly helps prevent debris, dried coating particles, and contaminants from entering the fluid section, protecting internal pump components and improving overall spray consistency. Proper filtration is essential for maintaining even atomization, reducing tip clogs, and extending the service life of the sprayer during heavy-duty airless spraying applications.

Key OEM components commonly associated with the GPX 80 Filter Assembly include the Titan 0294194 Filter Body Assembly, Titan 14069 Filter 50 Mesh, pressure sensor assembly, Titan 9894245 Filter Support, Titan 14072 O-Ring, and Titan 0507690 Bypass Valve Assembly. These parts work together to regulate fluid flow, maintain filter positioning, prevent leaks, and stabilize pressure during spraying operations.

FAQs

Pulsating pressure often occurs when the filter mesh becomes partially blocked with dried coating material. Restricted fluid movement forces the pump to cycle unevenly, causing pressure surges at the spray gun.

Filter collapse may happen when thick materials are sprayed without proper thinning or when excessive pressure builds inside the filter housing. Damaged mesh filters restrict flow and reduce spray efficiency.

Frequent tip clogging usually indicates contamination bypassing the filter assembly due to a damaged Titan 14072 O-Ring or worn filter support that prevents proper sealing inside the housing.

A damaged filter support may allow the filter element to shift under pressure, reducing filtration efficiency and causing unstable fluid flow through the manifold system.

The Titan 0507690 Bypass Valve Assembly helps redirect pressure safely during priming and spraying modes. If the valve sticks or leaks internally, the system may lose spray pressure or struggle to maintain prime.

GPX 80 Filter Assembly

Buy GPX 80 Filter Assembly OEM Replacement Parts Online

FAQs

1. Why does the GPX 80 Filter Assembly create pulsating spray pressure during operation?

2. What causes the Titan 14069 Filter 50 Mesh to collapse or deform inside the assembly?

3. Why does the GPX 80 sprayer continue to clog tips even after replacing the spray tip?

4. What happens if the Titan 9894245 Filter Support becomes weak or damaged?

5. Why is the Titan 0507690 Bypass Valve Assembly important in the GPX 80 Filter Assembly?