Titan EPX2455 | Drive Assembly Replacement Parts
Buy Titan EPX2455 Drive Assembly Parts
Keep your Titan EPX2455 Piston Pump operating with genuine Titan EPX2455 Drive Assembly Parts from AllTitanParts. Shop OEM slider assemblies, slider housings, electrical covers, fuse holder kits, 15A fuses, pressure-control knobs, grounding hardware and power cord assemblies.
Use the EPX2455 exploded drive assembly diagram to identify the exact component, compare the Titan part number and purchase the replacement needed for your repair.
Drive Assembly Overview
Shop Genuine Titan EPX2455 Drive Assembly Replacement Parts
The Titan EPX2455 Drive Assembly contains mechanical and electrical components that support the operation of the piston pump. The mechanical drive transfers motion to the pumping mechanism, while associated electrical hardware and pressure-control components help support the sprayer's operation.
Repeated operating cycles, vibration, mechanical wear, damaged wiring or electrical faults can affect drive-system performance. When a component fails, using the correct Titan replacement part helps restore the intended assembly configuration.
AllTitanParts currently lists nine genuine Titan replacement products for the EPX2455 Drive Assembly. Browse the diagram reference and part number to locate the component you need.
OEM Parts Reference Directory
Titan EPX2455 Drive Assembly Parts List
The following nine products are listed for the EPX2455 drive assembly.
| Diagram Ref. | Titan Part Number | Description | Replacement Reference |
|---|---|---|---|
| 1 | 800-078 | Electronic Cover, Aspen | OEM component |
| 9 | 0507218 | Slider Assembly | OEM component |
| 10 | 0507769 | Slider Housing | OEM component |
| 18 | 9800340 | Ground Screw | OEM component |
| 21 | 800-934A | Fuse Holder Service Kit | Replaces Titan 0551628 |
| 22 | 800-929 | 15A Fuse | Replaces Titan 0551627 |
| 26 | 700-175 | Potentiometer Cap | Replaces Titan 507748 |
| 27 | 700-159 | Pressure Control Knob | Replaces Titan 507740 |
| 29 | 704-553 | Power Cord Assembly | Replaces Titan 552101 |
The table represents nine listed replacement products, not every component shown in the complete factory drive assembly drawing.
Featured Drive Components
Titan EPX2455 Slider, Fuse, Pressure Control and Power Cord Parts
DIAGRAM REF. 1
Titan 800-078 Electronic Cover
The Titan 800-078 Electronic Cover, listed as Cover Elec Aspen, protects the designated electronic control area. Replace a cracked, missing or damaged cover with the specified part.
Part Number: 800-078
DIAGRAM REF. 9
Titan 0507218 Slider Assembly
The Titan 0507218 Slider Assembly is a mechanical drive component associated with transferring reciprocating motion to the pump mechanism.
Inspect it for excessive wear, binding or physical damage when diagnosing abnormal mechanical drive operation.
Part Number: 0507218
DIAGRAM REF. 10
Titan 0507769 Slider Housing
The Titan 0507769 Slider Housing provides a mounting and guiding structure for the associated slider mechanism.
Check for damage, misalignment or wear that could interfere with proper slider movement.
Part Number: 0507769
DIAGRAM REF. 18
Titan 9800340 Ground Screw
The Titan 9800340 Ground Screw is designated electrical grounding hardware for the assembly. Proper grounding is an important electrical safety requirement.
Replace missing or damaged grounding hardware only with the correct specified component and follow the manufacturer's service instructions.
Part Number: 9800340
DIAGRAM REF. 21
Titan 800-934A Fuse Holder Service Kit
The Titan 800-934A Fuse Holder Service Kit provides replacement fuse-holder hardware for the designated electrical circuit.
Inspect the fuse holder for damage or poor connections if electrical faults are suspected. Identify the underlying cause of a blown fuse before restoring power.
800-934A replaces 0551628.
DIAGRAM REF. 22
Titan 800-929 15A Fuse
The Titan 800-929 Fuse is a 15-amp replacement fuse listed for the EPX2455 drive assembly.
Never bypass a fuse or substitute a higher amperage rating. A repeatedly blown fuse requires electrical diagnosis by a qualified technician.
800-929 replaces 0551627.
DIAGRAM REF. 26
Titan 700-175 Potentiometer Cap
The Titan 700-175 Potentiometer Cap fits over the designated pressure-control potentiometer interface.
Inspect the cap if it is cracked, missing or no longer fits correctly. A defective potentiometer itself requires separate diagnosis.
700-175 replaces 507748.
DIAGRAM REF. 27
Titan 700-159 Pressure Control Knob
The Titan 700-159 Pressure Control Knob provides the operator interface for adjusting the sprayer's pressure setting.
Replace a broken or stripped knob with the specified Titan component. If pressure cannot be adjusted, inspect the underlying control system as well.
700-159 replaces 507740.
DIAGRAM REF. 29
Titan 704-553 Power Cord Assembly
The Titan 704-553 Power Cord Assembly supplies electrical power to the compatible sprayer configuration.
Replace a cord showing damaged insulation, exposed conductors, broken strain relief or other defects. Electrical replacement should be performed according to Titan's service instructions.
704-553 replaces 552101.
Drive System Operation
How the Titan EPX2455 Drive Assembly Works
Electrical Supply
The power cord and associated electrical components support power delivery to the sprayer.
Electrical Protection
The specified fuse, fuse holder and grounding hardware support the intended electrical arrangement.
Mechanical Motion
The drive mechanism and slider assembly transfer reciprocating motion to the pump's fluid section.
Pressure Adjustment
The pressure-control knob and potentiometer interface allow adjustment of the selected operating pressure.
OEM Replacement Part Numbers
Titan EPX2455 Drive Assembly Part Number Replacements
The category identifies the following manufacturer replacement references:
- Titan 800-934A Fuse Holder Service Kit replaces 0551628.
- Titan 800-929 15A Fuse replaces 0551627.
- Titan 700-175 Potentiometer Cap replaces 507748.
- Titan 700-159 Pressure Control Knob replaces 507740.
- Titan 704-553 Power Cord Assembly replaces 552101.
Match each replacement reference to the corresponding component only. Similar-looking electrical or drive parts should not be treated as interchangeable without manufacturer confirmation.
Repair and Troubleshooting
Common Titan EPX2455 Drive Assembly Problems
| Symptom | Parts to Inspect | Recommended Check |
|---|---|---|
| Sprayer does not power on | 704-553 cord, 800-929 fuse, 800-934A holder | Check power supply and have the electrical circuit diagnosed safely. |
| Fuse blows repeatedly | 800-929 fuse and associated electrical system | Investigate the underlying electrical or mechanical fault before replacing the fuse. |
| Motor operates but pumping motion is abnormal | 0507218 slider, 0507769 housing | Inspect the drive linkage, slider movement and pump load. |
| Grinding or unusual mechanical noise | Slider assembly, housing and related drive components | Stop operation and inspect for wear, damage or binding. |
| Pressure knob is cracked or loose | 700-159 knob, 700-175 cap | Inspect the physical control components and their fit. |
| Pressure setting does not respond | Pressure-control interface and electrical controls | Determine whether the problem is mechanical or electronic. |
| Damaged or exposed power wiring | 704-553 power cord | Disconnect power immediately and arrange proper replacement. |
| Electronic cover is broken | 800-078 electronic cover | Inspect the cover and underlying components before returning the sprayer to service. |
Buying Guide
How to Order Titan EPX2455 Drive Assembly Parts
Verify Your Model
Confirm the Titan EPX2455 model and record the serial number.
Identify the Component
Find the affected drive or electrical part on the exploded diagram.
Match the OEM Number
Compare the diagram reference and any manufacturer replacement number.
Purchase at AllTitanParts
Check the product listing and order the required replacement.
Preventive Maintenance
Maintain Your Titan EPX2455 Drive Assembly
Inspect the Power Cord
Look for cuts, exposed conductors, damaged plugs and strain-relief problems.
Check Control Components
Inspect the pressure-control knob and cap for cracks or looseness.
Monitor Drive Noise
Investigate unusual vibration, binding or grinding before further operation.
Maintain Electrical Protection
Keep the electronic cover secure and use only the specified fuse and grounding hardware.
Related EPX2455 Parts Categories
Shop More Titan EPX2455 Piston Pump Parts
EPX2455 Main Assembly Parts
Fluid section assemblies, bypass valves and fittings.
EPX2455 Fluid Section Parts
Pump packings, cylinders, piston rods and valve parts.
EPX2455 Filter Assembly Parts
Filter housing and fluid filtration components.
EPX2455 Low Boy Suction Set
Siphon and return-line components.
EPX2455 Upright Cart Parts
Upright cart hardware and replacement components.
EPX2455 Low Boy Cart Parts
Low-boy wheels and cart hardware.
Important Titan EPX2455 Drive Assembly Service Safety
Switch off the sprayer, disconnect the power cord and follow the complete Titan pressure-relief procedure before servicing the drive assembly. Electrical components can present shock or fire hazards. Never bypass fuses, grounding hardware or protective covers. Do not energize equipment with exposed wiring. Follow the applicable Titan service manual and use qualified personnel for electrical or internal mechanical repairs.
Order Titan EPX2455 Drive Assembly Parts Today
Shop genuine Titan slider assemblies, fuse kits, pressure-control knobs, electrical covers and power cords. Match your diagram reference and OEM part number before ordering.
Shop EPX2455 Drive Assembly PartsFrequently Asked Questions
Titan EPX2455 Drive Assembly Parts FAQs
What parts are listed for the Titan EPX2455 Drive Assembly?
The category lists an electronic cover, slider assembly, slider housing, ground screw, fuse holder kit, 15A fuse, potentiometer cap, pressure control knob and power cord assembly.
How many replacement products are listed?
Nine genuine Titan replacement products are currently listed for the EPX2455 Drive Assembly.
What is the EPX2455 slider assembly part number?
Titan 0507218 is the Slider Assembly listed at diagram reference 9.
What is the Titan EPX2455 slider housing part number?
Titan 0507769 is the Slider Housing listed at diagram reference 10.
What fuse is listed for the EPX2455 Drive Assembly?
Titan 800-929 is the 15A Fuse listed at diagram reference 22 and replaces Titan 0551627.
What replaces Titan 0551628 Fuse Holder?
Titan 800-934A Fuse Holder Service Kit is listed as the replacement for Titan 0551628.
What replaces Titan 507740 Pressure Control Knob?
Titan 700-159 Pressure Control Knob is listed as the replacement for Titan 507740.
What replaces Titan 507748 Potentiometer Cap?
Titan 700-175 Potentiometer Cap is listed as the replacement for Titan 507748.
What power cord fits the Titan EPX2455 Drive Assembly?
Titan 704-553 Power Cord Assembly is listed at diagram reference 29 and replaces Titan 552101.
Why will my Titan EPX2455 not turn on?
Possible causes include a power supply problem, damaged cord, blown fuse, faulty fuse holder or another electrical fault. Have the electrical system checked before replacing components.
Can a damaged slider assembly affect pump operation?
Yes. Damage or binding in the slider mechanism can interfere with the transfer of reciprocating motion to the fluid section. Inspect the complete mechanical drive before replacing parts.
Where can I buy Titan EPX2455 Drive Assembly Parts?
Shop at AllTitanParts Titan EPX2455 Drive Assembly or call 713-931-0006 for part identification assistance.
Need Help Finding EPX2455 Drive Assembly Parts?
Have your Titan EPX2455 model, serial number and drive assembly diagram reference ready when contacting AllTitanParts.
713-931-0006