Titan sells piston lube under three part numbers: 700-926, 314-480 (8oz) and 314-481 (4 oz bottle). It goes in the wet cup or packing oil reservoir that keeps the pump packings lubricated, and the amount and method are different on each machine, so your manual decides. Most available items are processed for shipment within about 1-2 business days, and some are ordered from the manufacturer after you order (see Shipping Info).
Why Piston Lube Matters
In a piston pump the piston rod moves through packings that seal it, and the wet cup holds the lubricant that keeps those packings lubricated. Titan's Hydra X manual puts the purpose plainly: piston lube prevents increased wear and tear of the packings. It is a small item compared with the pump, but the packings it protects are the parts that wear out first.
If you are already seeing wear, see Impact 640 Packings, Piston and Valves: What to Replace and PowrCoat Packings and Piston Lube: Wear Signs and Parts.
Part Number 700-926
The Titan 700-926 Piston Lube is listed on a very wide spread of accessory diagrams, including the Impact 540, Impact 640, PowrLiner 3100 and Hydra X pages. The product listing does not state the bottle size in its name, so open the product page to confirm the size before you order.
Part Numbers 314-480 and 314-481
The Titan 314-480 is the 8oz Piston Lube. It is the part number the Hydra X, Hydra M and Hydra Pro IV manuals name for the upper packing. The Titan 314-481 is a 4 oz bottle and is listed on the Impact 740/840 accessories diagram and the PowrLiner 1800M accessories page.
Where the Diagrams List It
- Impact: the 410, 440, 540, 640, 740, 840, 1040 and 1140 accessory pages list 314-480 and 700-926.
- PowrLiner and Hydra: the PowrLiner 3100 accessories page lists 700-926, and the Hydra X accessories page lists both 314-480 and 700-926.
- Epic: the Epic 660HPX accessories page lists 700-926.
A listing on an accessories diagram tells you the part exists for that model. It does not tell you how much to use or how often, so use your manual for that.
How to Use It Correctly
The amounts differ by model. The Impact 400 manual has you fill the oil cup, the Impact 640 manual uses an oiler reservoir with an oiler button, and the Hydra X manual has you fill the packing oil reservoir about half full without overfilling. The Hydra M and Pro IV manuals add that you should not substitute water or paint solvent. Follow the quantity, interval and procedure in your own manual, and use the pressure relief procedure from that manual before you service anything. Manuals are on the Titan manuals page.
Signs the Packings Need Attention
Worn packings show as leaking at the wet cup, paint in the wet cup, or pressure that will not hold. Piston Lube does not repair worn packings. If you see these signs, look at the packings and at the piston rod: a scored rod destroys new packings, so check it before you fit a repacking kit. The kit for your model is on the fluid section diagram, for example the Impact 540 fluid section or the PowrLiner 3100 fluid section. The post Impact Repacking and Valve Kits: Which Kit Goes With Which Model covers the kit numbers.
Where Not to Use It
How to Order Piston Lube
AllTitanParts.com is an Authorized Titan Dealer supplying genuine OEM replacement parts for Titan, SpeeFlo, SprayTech and Wagner equipment, based in Houston, Texas. Orders are processed on business days with a 12 pm Eastern cut-off. Most available items are processed for shipment within about 1-2 business days, and standard delivery is estimated at about 4-5 business days after shipment. Some items are ordered from the manufacturer after you order, so availability shown does not always mean an item is on a shelf, and all dates are estimates (see Shipping Info). Call (713) 931-0006 with your model if you are unsure which part number to order.
Find Piston Lube for Your Sprayer
Give us your model and serial number and we will help match the part number to your machine.
(713) 931-0006 Shop Piston Lube