C.A. Tech T100C-22-2167 Spray Gun
C.A. TECHNOLOGIES TOMCAT 100C HEAVY-COATING SPRAY GUN
C.A. Technologies T100C-22-2167 Tomcat 100C 2.2mm Conventional Spray Gun combines a large 2.2 mm fluid nozzle with the 21-2167 pressure-feed air cap. This rugged production configuration is designed for heavy-body primers, high-solids enamels, high-solids automotive coatings, adhesives, and similar materials.
T100C-22-2167 is manufactured by C.A. Technologies, not Titan Tool. Its 21-2167 conventional pressure-feed air cap is specifically matched to a 2.2 mm fluid setup and uses approximately 14.5 SCFM at 50 PSI, making this configuration particularly suitable for heavier coating applications.
C.A. TECHNOLOGIES TOMCAT 100C HEAVY-COATING SPRAY GUN
C.A. Technologies T100C-22-2167 Tomcat 100C 2.2mm Conventional Spray Gun
Handle demanding high-viscosity finishing work with C.A. Technologies T100C-22-2167, a Tomcat 100C pressure-feed conventional spray gun combining a 2.2 mm fluid nozzle with the 21-2167 air cap for heavy-body primers, high-solids coatings, adhesives, and other compatible heavy materials.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | T100C-22-2167 is a single-setup C.A. Technologies Tomcat 100C conventional spray gun configured for heavier coating materials. It combines the 31-0622 2.2 mm (.086-inch) fluid nozzle and corresponding 40-1122 fluid needle with the 21-2167 pressure-feed conventional air cap. The Tomcat platform is designed as a rugged, economical general-purpose production spray gun. |
| Function | A separate pressurized material supply delivers coating to the gun through its fluid inlet while regulated compressed air passes through the 21-2167 air cap to atomize material exiting the 2.2 mm nozzle. This pressure-feed arrangement provides positive material delivery for coatings that may be difficult or inefficient to handle through a conventional siphon-feed setup. |
| Industrial Applications | C.A. Technologies' T100C application chart specifically places the 2.2 mm × 21-2167 configuration in the heavy-material category, identified as greater than 30 seconds Zahn #2. Representative materials include heavy-body primers, high-solids enamels, high-solids automotive coatings and adhesives. The setup is useful for industrial, automotive, fabrication and production finishing where higher-viscosity materials must be delivered consistently. |
| Accurate Compatible Titan Machines | No model-specific Titan machine fitment is established for T100C-22-2167. The gun is manufactured by C.A. Technologies and operates from a regulated compressed-air source plus a compatible pressurized fluid supply. It is not a direct replacement for a Titan airless gun or Titan turbine HVLP gun. Compatibility should therefore be determined by the compressed-air and pressure-feed finishing system rather than a Titan sprayer model. |
| Accurate Part Number | C.A. Technologies T100C-22-2167. The T100C designation identifies the Tomcat 100 Conventional platform. The “22” configuration corresponds to the 2.2 mm (.086-inch) fluid nozzle, while “2167” identifies the 21-2167 Series 100C conventional pressure-feed air cap. C.A. Technologies lists T100C-XX-XXXX as its single-setup Tomcat part-number format. |
| Compatible Parts & Assemblies | The verified atomization combination uses 31-0622 2.2 mm (.086-inch) fluid nozzle, 40-1122 fluid needle marked “122,” and 21-2167 conventional pressure-feed air cap. The 21-2167 is specifically designated for a 2.2 mm fluid setup. The Tomcat 100C uses serviceable fluid-control, fan-control, needle-packing and air-valve components and connects to a compatible external pressure-feed material source. |
| Related Parts Commonly Serviced Together | Inspect the 31-0622 fluid nozzle, 40-1122 needle and 21-2167 air cap together whenever atomization or pattern quality deteriorates. Also inspect the needle packing, fan control, air valve, fluid hose and pressure-pot or pump connection. C.A. Technologies specifies repair kit 10-112 for the Tomcat 100C platform. Worn atomization components should be replaced with correctly matched parts rather than mixed nozzle and cap combinations. |
| Common Problems Solved | The large 2.2 mm fluid passage and pressure-feed arrangement address applications where heavier coatings are difficult to move consistently through smaller conventional setups. Correctly configured equipment can improve material delivery and atomization of compatible high-viscosity coatings. Replacing worn nozzle, needle or air-cap components can also correct leakage, restricted flow, poor atomization and distorted spray patterns. |
| Use with Coating Systems | The 21-2167 is a pressure-feed Series 100C conventional air cap specifically matched to the 2.2 mm fluid configuration. C.A. Technologies specifies approximately 14.5 SCFM at a suggested 50 PSI gun inlet pressure, with actual inlet pressure adjusted as required by the application. The Tomcat has a 1/4-inch NPS male air inlet and 3/8-inch NPS male fluid inlet and weighs approximately 20 ounces. |
| OEM & Brand Information | T100C-22-2167 is manufactured by C.A. Technologies and is not a Titan Tool-manufactured OEM spray gun. C.A. Technologies describes the Tomcat 100C as an economical general-purpose conventional gun built for production use across coatings ranging from thin to thick. The platform features rugged construction, self-adjusting needle packing, replaceable fluid nozzles and configurations for specialized coating requirements. |
| Commercial Benefits | T100C-22-2167 gives production finishers a factory-defined 2.2 mm pressure-feed setup specifically suited to demanding heavy-coating work. Its high-capacity fluid configuration, serviceable atomization components and rugged Tomcat construction make it a practical choice for shops spraying heavy primers, high-solids coatings and adhesives where smaller general-purpose configurations may restrict material delivery. |
Contractor Selection Insight
Choose T100C-22-2167 when your material requires a genuine heavy-coating setup rather than simply increasing fluid pressure through a smaller nozzle. The 2.2 mm nozzle and 21-2167 air cap are a documented matched pressure-feed combination for heavy-body materials. Your compressor should support approximately 14.5 SCFM at the specified operating condition, and your pressure-feed system must deliver material consistently to the gun's 3/8-inch NPS fluid inlet.
FAQ Section
Key answers for professional finishers selecting the T100C-22-2167.
No reviews yet. Be the first to review this product!