Please wait while we process your order...

Product successfully added to your cart.
Placeholder Image

Quantity in Cart: 1

Continue Shopping Shopping Cart
Item removed from Cart
X
 
×

AllTitanParts

(713) 931-0006

Titan 9885562 Plug, O-ring

Titan 9885562 Plug, O-ring

Sourced From:
Titan Tools Inc.

 

SprayTech part 9885562 is a plug with integrated O‑ring seal used to cap fluid passages or service ports on compatible EP‑series sprayers. This kit replaces a worn or damaged sealing plug to prevent leaks, loss of pressure, or contamination of the fluid system.

Part Number 9885562
Part Description Plug, O‑ring (sealing plug kit)
Brand SprayTech
Fits SprayTech EP2105, EP2205
Condition New

$8.4

 

Plug with O‑ring 9885562 for SprayTech EP2105 & EP2205

The 9885562 Plug with O‑ring is a genuine replacement sealing component used on SprayTech EP2105 and EP2205 airless paint sprayers. It is typically installed in pump housing ports, manifold access points, or other fluid passages where a temporary or permanent seal is required. The integrated O‑ring ensures a leak‑tight fit under high pressure.

A worn, cracked, or missing O‑ring can cause fluid leaks, loss of prime, pressure fluctuations, or contamination ingress. Replacing the complete plug and O‑ring assembly restores proper sealing, maintains system integrity, and prevents downtime.

Service Guidance: When servicing the pump or fluid section, always inspect plugs and O‑rings for wear, hardening, or damage. Replace the assembly if the O‑ring shows flat spots, cuts, or if the plug threads are damaged. Apply a light coat of compatible lubricant to the O‑ring during installation to prevent rolling or pinching.

What it does and when to replace it

What the plug with O‑ring does
Seals ports Prevents fluid leakage from pump housing or manifold
Maintains pressure Keeps system pressure stable by closing off unused ports
Prevents contamination Blocks entry of dirt, debris, or moisture into fluid system
When replacement is recommended
Fluid leaks Visible seepage around plug during operation or pressure test
Damaged O‑ring Cut, cracked, flattened, or hardened O‑ring
Stripped threads Plug does not tighten securely or cross‑threads
Pressure loss System fails to hold pressure due to poor seal

Compatibility

Part 9885562 is a direct replacement for the following models:

Brand / Model Component
SprayTech EP2105 Plug with O‑ring
SprayTech EP2205 Plug with O‑ring
* Always verify the location of the plug using your equipment’s parts diagram. This plug is commonly used on pump inlet/outlet ports and manifold test points.

Related parts commonly serviced together

When replacing a plug or O‑ring, inspect these components to ensure complete system integrity.

Pump housing / manifold

Inspect the port for burrs or corrosion that could damage the new O‑ring.

Other O‑rings & seals

If one O‑ring has failed, others in the fluid section may be worn as well.

Fluid section service kit

Consider a full service kit if multiple seals are showing age.

Frequently Asked Questions

The 9885562 plug with O‑ring is commonly found on the pump housing, manifold, or fluid section of SprayTech EP2105 and EP2205 models. It may seal a pressure test port, an unused outlet, or a service access point. Refer to your parts diagram for exact location.

If the metal plug is undamaged and threads are in good condition, you may replace only the O‑ring. However, the 9885562 assembly includes both components, ensuring a proper fit and material compatibility. For complete reliability, we recommend using the factory‑assembled plug and O‑ring.

The O‑ring is typically made of a high‑grade nitrile (Buna‑N) or fluorocarbon (Viton) compound, designed to resist paint solvents, water‑based coatings, and hydraulic fluids commonly used in airless sprayers. It provides long service life when properly installed.

Install the plug hand‑tight plus approximately 1/8 to 1/4 turn with a wrench. Do not overtighten, as this can damage the O‑ring or strip the threads. A light coating of compatible grease or lubricant on the O‑ring helps it seat properly and prevents rolling during installation.

Copyright © 2024 AlltitanParts.com - All Rights Reserved.

Payment Methods