Titan 920-927 Long Body Filter
OEM Titan Filter Housing
Titan 920-927 Long Body Filter is the OEM filter body (housing) for the outlet manifold filter assembly on compatible Titan airless sprayers, providing the structural housing for the filter element and internal sealing components.
Compatibility Overview
Houses the filter element and internal check ball, maintaining proper alignment and sealing within the high-pressure manifold assembly. A cracked, corroded, or damaged filter body causes fluid leaks, pressure loss, and compromised filtration. OEM replacement restores proper housing integrity and reliable filter performance.
Titan Filter Body Replacement
Titan 920-927 Long Body Filter for Outlet Manifold Assembly
Titan 920-927 is the OEM long-body filter body (housing) designed for the outlet manifold filter assembly on compatible Titan airless sprayers. Listed as "Filter body" in the Filter Block Assembly of the official Titan 1200GXC manual, this structural component houses the filter element, check ball, and related sealing components. It is also cross-referenced for the Commander 920 Outlet Manifold Filter Assembly. The filter body serves as the pressure-containing housing for the high-pressure filtration system. It must withstand operating pressures while maintaining precise alignment of internal components for proper sealing and filtration. The long-body configuration provides additional internal volume and filter media capacity compared to standard housings, supporting extended service intervals and consistent flow. Over time, filter bodies can develop cracks, corrosion, or thread damage from pressure cycling, chemical exposure, or improper service procedures. A compromised filter body causes fluid leaks, pressure loss, and potential safety hazards. This genuine OEM replacement restores proper housing integrity, reliable filtration, and safe operation. Always verify compatibility against your specific sprayer's parts diagram, as filter assembly configurations vary across models and production revisions.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | OEM Titan long-body filter body (housing) for the outlet manifold filter assembly. Provides the pressure-containing housing for the filter element and internal components. |
| Function | Houses the filter element and check ball; maintains proper alignment of internal sealing components; contains high-pressure fluid during filtration. |
| System Location | Outlet manifold filter assembly. Listed as item 4 "Filter body" in the 1200GXC Filter Block Assembly. |
| Documented Compatible Models | Titan 1200GXC Airless Sprayer; Commander 920 Outlet Manifold Filter Assembly. Verify your exact model against the parts diagram. |
| OEM Part Number | 920-927 Filter Body (Long Body). |
| Common Problems Solved | Fluid leaks from cracked or corroded filter body; pressure loss from compromised housing integrity; thread damage preventing proper filter cap sealing. |
| Replacement Indicators | Visible cracks, corrosion, thread damage, or deformation. Replace if the filter body cannot maintain a proper seal with the filter cap or manifold. |
| Related Parts Commonly Serviced Together | Filter cap (920-917); thick PTFE gasket (920-006); thin PTFE gasket (920-070); filter elements 5 mesh (920-001), 50 mesh (920-004), 100 mesh (920-005); check ball (920-103); pipe plugs. |
| Installation Notes | Always relieve system pressure before servicing. Inspect the filter body for cracks, corrosion, or thread damage before installation. Ensure proper seating of gaskets and O-rings during reassembly. |
The 920-927 Long Body Filter is the structural housing for the outlet manifold filter assembly. If you observe fluid leaks from the filter body, pressure loss that persists after filter element replacement, or visible cracks or thread damage, inspect the filter body for damage. Replace if any compromise to housing integrity is found. Always verify model compatibility against your Titan service manual or parts diagram, as filter assembly configurations vary across sprayer platforms.
Frequently Asked Questions
Contractor-focused answers for confirming fitment and service value.
No reviews yet. Be the first to review this product!
