Please wait while we process your order...

Product successfully added to your cart.
Placeholder Image

Quantity in Cart: 1


Continue Shopping Shopping Cart
Item removed from Cart
X
 
×
Titan 770-099 Tie Wrap

Titan 770-099 Tie Wrap

Sourced From:
Titan Tools Inc.

 

Titan part 770-099 is a tie wrap (cable tie) used for bundling and securing wires, hoses, or cables on compatible Titan spray systems. Common applications include organizing electrical harnesses, securing fluid hoses, and managing wiring to prevent snags or damage.

Part Number 770-099
Part Description Tie Wrap
Brand Titan
Fits
  • PowrCoat 630
  • AirCoat 423
Condition New

$2.5

 

Tie Wrap for PowrCoat & AirCoat Spray Systems

The Titan 770-099 Tie Wrap is an OEM cable tie used to bundle and secure wires, hoses, or cables on PowrCoat 630 and AirCoat 423 spray systems. It keeps electrical harnesses organized, prevents fluid hoses from snagging, and reduces vibration‑related wear.

Tie wraps can become brittle, break, or loosen over time due to chemical exposure, heat, or age. A missing or broken tie wrap can allow wires or hoses to contact moving parts, leading to shorts, leaks, or damage. Replacing with an OEM tie wrap restores proper cable management and safety.

Service Guidance: When replacing tie wraps, use the correct length and width for the bundle. Do not overtighten to the point of deforming hoses or crushing wires. Trim excess tail flush to avoid sharp edges. Replace any tie wrap that shows cracking or UV degradation.

What it does and when to replace it

What the tie wrap does
Cable management Bundles wires and hoses to prevent tangling
Vibration reduction Secures loose components to prevent fatigue damage
Safety Keeps electrical and fluid lines away from heat or moving parts
When replacement is recommended
Broken or cracked Tie wrap has failed or shows stress cracks
Brittle from chemical exposure Material feels hard and snaps when flexed
Missing during service Original tie wrap lost during repair or maintenance
Loose bundle Original tie wrap stretched or no longer holds securely

Compatibility

Titan part 770-099 is a direct replacement tie wrap for the following spray systems. Verify the required length and tensile strength for your specific application.

Brand / Model Components
PowrCoat 630 Tie Wrap
AirCoat 423 Tie Wrap

Related parts commonly serviced together

When replacing tie wraps, inspect or replace these associated components for complete cable management.

Wire harness / cable assembly

Inspect for chafing or exposed wires before securing with new tie wraps.

Hose protective sleeve

If hoses show wear, add a protective sleeve before bundling.

Mounting clips / brackets

Damaged clips may need replacement to properly anchor bundles.

Frequently Asked Questions

It is an OEM tie wrap (cable tie) used on PowrCoat 630 and AirCoat 423 spray systems to bundle wires, cables, and hoses.

Length and tensile strength vary by application. Typical Titan OEM tie wraps are 4‑8 inches long with 18‑50 lb tensile strength. Always compare with your original or check your parts diagram.

While generic ties may fit, OEM Titan 770-099 is rated for chemical resistance to paint solvents and temperature extremes found in spray environments. For critical applications (e.g., securing high‑pressure hoses or sensitive wiring), use genuine Titan parts.

Tighten until the bundle is secure but not deforming hoses or cutting into wire insulation. Use a flush cutter to trim the tail. Avoid overtightening, which can damage soft hoses or create stress risers in wires.