Titan 540-030 Green 30 Mesh Filter
OEM Titan Filtration Component
Titan 540-030 Green 30 Mesh Filter is a genuine OEM coarse filtration element for compatible Titan airless sprayers and spray guns. Its green-coded 30-mesh screen captures larger debris while maintaining flow for heavier coatings.
Compatibility
Replace if the screen is torn, deformed, or persistently clogged. A 30-mesh filter is coarser than 60-, 100-, or 150-mesh alternatives and is suited to heavier-bodied coatings.
Titan Filtration Component Replacement
Titan 540-030 Green 30 Mesh Filter for Sprayer & Gun Service
Titan 540-030 is a green-coded 30-mesh filter used to remove debris and contaminants from coating materials on compatible Titan airless sprayers and spray guns. Its coarse filtration grade helps maintain flow for heavier-bodied coatings while protecting downstream components from larger particles.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | Genuine OEM Titan green 30-mesh filter for compatible airless sprayers and spray guns. Listed in multiple independent catalogs as the 540-030 filter. |
| Function | Captures debris and particles from coating materials before they reach the spray tip or pump components. Helps prevent tip clogs, protects pump packings and valves, and maintains consistent material flow. |
| Compatible Titan Machines | Titan 540IX (primary fit, confirmed in catalogs); Titan 440IX; Titan Impact 340; Titan Impact 400. Also compatible with LX-80 and LX-80 Platinum spray guns. Always confirm fitment using your exact model's parts diagram and serial number. |
| OEM Part Number & Spec | 540-030 Green 30 Mesh Filter. 30 openings per linear inch (coarse grade). |
| Replacement Indicators | Visible clogging or screen blockage; reduced material flow; frequent spray-tip clogs; torn, deformed, or damaged mesh; routine maintenance intervals. |
| Related Parts Commonly Serviced Together | Filter housing (0532360A); suction strainer; spray tip; other mesh grades (540-060 white, 540-100 yellow, 540-150 red) for different coating viscosities. |
| Common Problems Solved | Restores proper filtration, reduces tip clogs and pattern defects, protects pump components from abrasive debris, and maintains reliable material delivery. |
| Why Genuine OEM | Exact mesh size and dimensions ensure proper fit and filtration performance. Using the correct grade prevents flow restriction or inadequate debris removal. |
Service guidance: Turn off the sprayer, disconnect power, and complete the pressure-relief procedure before servicing. Locate the filter in the correct parts diagram. Remove the filter housing by hand, slip the old filter off the support spring, and inspect the seal. Slide the new or cleaned filter over the spring with the adapter in place, push it into the pump block, and thread the housing back on until secure. Hand-tighten the housing, ensuring it is fully seated. Perform leak and spray-pattern checks before returning to service.
Frequently Asked Questions
Quick answers for confirming fitment and identifying when replacement is needed.
No reviews yet. Be the first to review this product!