Titan 316-506 3300 PSI Whip Hose 5' X 3/16"
Improve spray gun maneuverability with the Titan 316-506 3300 PSI Whip Hose 5' X 3/16". This compact, high-pressure airless whip hose features a 5-foot length, 3/16-inch nominal internal diameter, and 3,300 PSI working-pressure rating. Designed for use as a flexible connection between a compatible main spray hose and airless spray gun, it helps reduce the handling burden of a larger hose near the operator. Ideal for compatible Titan painting equipment, part 316-506 supports easier gun positioning during walls, ceilings, and detailed finishing work. Confirm fitting sizes, material compatibility, and system pressure before ordering.
Improve Spray Gun Control with Titan 316-506 3300 PSI Whip Hose 5' X 3/16"
Make your airless spray gun easier to handle with the Titan 316-506 3300 PSI Whip Hose 5' X 3/16", a flexible high-pressure hose designed for use between a compatible main spray hose and spray gun. This Titan whip hose measures 5 feet long, has a 3/16-inch internal diameter, and carries a manufacturer-listed 3,300 PSI pressure rating. Its 1/4-inch NPSM female/male end connections provide a defined connection configuration for approved airless spray systems. Titan designs its airless hose range for durability, flexibility, and convenient coiling, while its conductive tube design supports proper grounding when installed in an approved system. Part 316-506 is listed by AllTitanParts for selected Impact, Impact X, PowrBeast, and Elite sprayers. Whether replacing a damaged whip hose or improving handling at the gun end of an existing spray line, this compact hose is a practical addition to a compatible professional painting setup.
Titan 316-506 Whip Hose Compatible Sprayer Models
Titan Impact Series
Impact 340, Impact 400, Impact 410, Impact 440, Impact 540, Impact 640, Impact 640 I, Impact 640 IA, Impact 740, Impact 840, Impact 1040, Impact 1140, Impact 1140 I, Impact 1140 IA, and Impact 1640. AllTitanParts lists Titan 316-506 for these models. Confirm the hose connections and pressure limits for your particular sprayer.
Titan Impact X Series
Impact X 410, Impact X 440, and Impact X 540I. These sprayers appear in the AllTitanParts accessory catalog for part 316-506. Check the installed spray gun and hose assembly before purchase.
Titan PowrBeast Series
PowrBeast 4700, PowrBeast 4700T, PowrBeast 7700, and PowrBeast 9700. These are retailer-listed applications. Do not install a 3,300 PSI whip hose on a system whose maximum operating pressure exceeds the hose rating.
Titan Elite Series
Elite 2000, Elite 3000, Elite 3500, Elite 3500 72V, and Elite 5500. AllTitanParts includes these models in the product compatibility listing. Verify the approved hose configuration for each machine.
Critical Fitment Note: These model names come from the AllTitanParts product and accessories catalog. Titan's manufacturer hose specifications confirm the physical hose configuration, but catalog inclusion alone does not establish safe compatibility with every machine revision. The installed spray gun, connection arrangement, and system operating pressure determine whether Titan 316-506 is appropriate.
How Titan 316-506 Whip Hose Improves Spray Gun Handling
A conventional main spray hose must withstand pressure while transporting coating material from the pump to the spray gun. Longer, larger-diameter hoses can be less convenient to maneuver near the operator's hand.
The Titan 316-506 5-foot whip hose provides a shorter, narrower flexible section near the gun. When properly connected to a compatible main hose, it can make the spray gun easier to position and reduce the resistance felt while moving the gun through a spraying pattern.
The 3/16-inch internal diameter and 1/4-inch NPSM female/male connections are important selection details. The smaller bore can affect pressure drop and material delivery, particularly with heavy coatings or high-flow spray tips. Confirm that the complete hose arrangement meets your application requirements.
Titan also describes its airless hose range as flexible, durable, easy to coil and uncoil, and designed with conductive tubing for grounding. These features support practical use when the hose is installed and maintained correctly.
Why Choose Titan 316-506 3300 PSI Whip Hose?
Improved maneuverability: The short whip section helps the operator position the spray gun more comfortably.
Manufacturer-defined specifications: The 5-foot length, 3/16-inch bore, and 3,300 PSI rating simplify correct product selection.
Known connection arrangement: Titan specifies 1/4-inch NPSM female/male end connections.
Flexible hose construction: Designed for convenient handling, coiling, and uncoiling.
Conductive tube design: Supports proper grounding within an approved spray system.
Practical replacement option: Provides a specific Titan part number when servicing a damaged or aging whip hose.
Broad accessory-catalog coverage: Listed for selected Titan Impact, Impact X, PowrBeast, and Elite machines, subject to system verification.
Signs Your Airless Whip Hose Needs Replacement
Visible cuts or abrasion: Damage to the hose covering may compromise its pressure integrity.
Bulges or swelling: Any unusual expansion is a serious warning sign requiring immediate removal from service.
Leaks at the hose or fittings: Stop operation immediately if coating escapes from the hose wall or a connection.
Permanent kinks: Severe bends can restrict fluid flow and weaken the hose.
Cracked or stiff hose covering: Loss of flexibility or visible deterioration can indicate aging or damage.
Damaged threaded connections: Stripped threads, distorted fittings, or damaged sealing surfaces require proper replacement.
How to Install Titan 316-506 5-Foot Whip Hose
High-Pressure Warning: Airless spray equipment can cause severe fluid-injection injuries. Never place hands near a pressurized leak, attempt to stop a leak with your body, or disconnect a hose before completing the manufacturer's pressure-relief procedure.
Step 1: Verify compatibility. Confirm that your spray system operates within the 3,300 PSI hose rating and uses compatible connections.
Step 2: Check the fittings. Identify the 1/4-inch NPSM female/male connections and verify their compatibility with the main hose and spray gun.
Step 3: Shut down the sprayer. Turn off the equipment and complete the prescribed pressure-relief procedure.
Step 4: Inspect existing components. Check the main hose, spray gun inlet, fittings, and adapters for wear or damage.
Step 5: Disconnect the existing connection. Remove the previous whip hose or main hose-to-gun connection only after pressure has been fully relieved.
Step 6: Inspect the new whip hose. Confirm the part number and examine the hose covering, end fittings, and sealing surfaces.
Step 7: Connect to the main hose. Use the correct mating connection or manufacturer-approved adapter. Do not force mismatched threads.
Step 8: Connect the spray gun. Attach the other end to the compatible gun connection, following the manufacturer's tightening instructions.
Step 9: Route and inspect. Avoid sharp bends, pinch points, hot surfaces, and moving equipment. Follow the approved startup procedure and check for leaks from a safe distance.
Step 10: Maintain after use. Flush according to the coating and sprayer instructions, inspect the hose, and store it loosely coiled without kinks.
Related Titan Airless Hoses and Whip Hose Options
Titan offers several 3,300 PSI airless hose configurations. Select the correct length, bore, end connections, and pressure rating for your application.
Related hoses are separate products, not included with Titan 316-506. Hose connections and fluid-delivery requirements must be verified before combining components.
Buy Titan 316-506 3300 PSI Whip Hose 5' X 3/16"
Improve handling at the spray gun with the correct Titan whip hose. Order Titan 316-506 from AllTitanParts for a compatible 3,300 PSI airless spray system.
Frequently Asked Questions
Answers about Titan 316-506 hose specifications, equipment compatibility, and safe installation.
What is Titan 316-506 3300 PSI Whip Hose?
It is a 5-foot, 3/16-inch internal-diameter high-pressure whip hose rated for 3,300 PSI and designed for compatible airless spray systems.
What fittings does Titan 316-506 use?
Titan's official hose catalog specifies 1/4-inch NPSM female/male end connections.
What is the maximum pressure rating?
Titan 316-506 is rated for a maximum working pressure of 3,300 PSI. The complete spray system must operate within the lowest-rated component's limit.
Can I use Titan 316-506 with an Impact 440?
AllTitanParts lists Titan 316-506 in the Impact 440 accessories catalog. Confirm the installed gun connection and operating pressure before use.
Is Titan 316-506 listed for Impact X 540I?
Yes. AllTitanParts lists the whip hose for the Impact X 540I. Verify the exact equipment configuration and pressure requirements.
Can Titan 316-506 be used with PowrBeast 9700?
The PowrBeast 9700 appears in the AllTitanParts compatibility catalog, but the whip hose must never be used above 3,300 PSI. Confirm the actual operating pressure and manufacturer's approved hose configuration before installation.
Why use a whip hose with a main spray hose?
A flexible whip hose reduces the handling resistance of a larger main hose near the spray gun, making the gun easier to maneuver.
Can I connect Titan 316-506 to Titan 316-505?
Titan 316-505 is a 50-foot, 1/4-inch hose with female connections at both ends, while Titan 316-506 has female/male 1/4-inch NPSM connections. Verify the complete fitting arrangement and pressure requirements before connecting them.
When should I replace a high-pressure whip hose?
Replace it if you find leaks, cuts, bulges, damaged fittings, exposed reinforcement, or permanent kinks. Never attempt an improvised repair on a damaged high-pressure hose.
Where can I buy Titan 316-506 3300 PSI Whip Hose?
Order Titan 316-506 3300 PSI Whip Hose 5' X 3/16" from AllTitanParts after confirming system compatibility.
No reviews yet. Be the first to review this product!