Titan 2437218 Pole Extension 3' with Swivel and Guard (Replaces Titan 310-390)
Titan Airless Sprayer Extension Accessories
Titan 2437218 Pole Extension 3' with Swivel and Guard
Extend your painting reach with the Titan 2437218 Pole Extension 3' with Swivel and Guard, the listed replacement for Titan 310-390. This three-foot airless spray gun accessory helps painters reach elevated walls, ceilings, soffits, and recessed surfaces while maintaining a more convenient working position. Its swivel head allows the spray tip angle to be adjusted for different surfaces, while the included guard supports a compatible spray tip installation. Ideal for professional painting and maintenance projects, this extension provides practical reach without changing your sprayer's pumping capacity. Confirm spray gun connection, tip compatibility, and pressure rating before use.
Compatibility note: Match Titan 2437218 to the actual spray gun and tip system. Sprayer model alone does not guarantee accessory fitment.
Professional Titan Airless Sprayer Accessories
Titan 2437218 Pole Extension 3' with Swivel and Guard for Extended-Reach Painting
Take on elevated surfaces, hard-to-reach corners, and overhead painting projects with the Titan 2437218 Pole Extension 3' with Swivel and Guard (Replaces Titan 310-390). This three-foot airless spray gun extension adds 36 inches of reach, allowing painters to position the spray tip farther from the gun body while working on high walls, ceilings, soffits, and architectural features. The integrated swivel assembly provides additional positioning flexibility, while the included tip guard supports safe, compatible spray tip installation. Listed for the Titan Impact 1040, Impact X 410, Impact X 440, and Impact X 540I, this extension is a practical accessory for professional contractors, maintenance technicians, and property painters. Whether replacing a damaged Titan 310-390 extension or expanding your painting equipment's reach, part 2437218 offers a convenient solution for compatible airless spraying applications.
Titan 2437218 Replaces Titan 310-390 Pole Extension
The Titan 2437218 Pole Extension 3' with Swivel and Guard is listed as the replacement for the earlier Titan 310-390 3ft Extension Pole. This replacement reference helps customers locate the current assembly when searching for the older Titan accessory number.
The 2437218 assembly provides a three-foot extension with a swivel and guard. Before replacing an older pole, verify the spray gun connection and ensure the supplied guard is compatible with the spray tip system being used.
Titan 2437218 Compatible Airless Sprayer Models
The AllTitanParts product listing identifies the following machines for Titan 2437218:
Titan Impact 1040
Listed as a compatible sprayer application for the 3-foot pole extension. Verify the installed gun's outlet connection and rated pressure.
Titan Impact X 410
The extension appears in the Impact X 410 accessory catalog and the product's fitment list. Confirm compatibility with the actual spray gun.
Titan Impact X 440
Listed for Impact X 440 applications where the spray gun and tip assembly accept the extension's connection configuration.
Titan Impact X 540I
Listed in the Impact X 540I accessory category. Verify the gun, guard, seals, and system pressure before use.
AllTitanParts also includes Titan 2437218 in accessory categories for other machines, including Impact 340, Impact 400, Impact 440, Impact 640, Impact 1140, Impact 1640, Elite 3000, PowrBeast 7700, and PowrBeast 9700. These additional associations are not independent confirmation of fitment for every installed spray gun.
Fitment reminder: Pole extension compatibility depends on the spray gun connection, tip guard, sealing arrangement, and maximum allowable pressure. Do not assume that every gun supplied with a listed sprayer model accepts this extension.
How Titan 2437218 Pole Extension Works
The Titan 2437218 attaches to a compatible airless spray gun, extending the location of the spray tip approximately three feet beyond the gun body. Pressurized coating material travels through the extension before reaching the tip assembly.
The included swivel provides additional positioning flexibility during painting. This is particularly useful when spraying overhead or angled surfaces where the gun body would otherwise be difficult to position.
The supplied guard supports the installation and protection of a compatible reversible spray tip. The pole extension does not increase pump pressure or automatically change the spray pattern. Coating delivery remains dependent on the sprayer, gun, spray tip, and material.
Benefits of Titan 2437218 Pole Extension 3' with Swivel and Guard
Three feet of additional reach: Helps painters access elevated or recessed surfaces more conveniently.
Swivel-assisted positioning: Offers flexibility when directing the spray tip toward angled or overhead surfaces.
Included tip guard: Provides the guard component required for a compatible spray tip setup.
Practical overhead access: Helps reduce the need to reposition the gun body directly beside elevated surfaces.
Replacement part identification: Serves as the listed replacement for Titan 310-390.
Professional versatility: Suitable for compatible residential, commercial, and maintenance spraying applications.
Recommended Painting Applications
Ceilings: Position the spray tip closer to accessible overhead surfaces.
High walls: Reach elevated wall sections without holding the gun body as close to the surface.
Soffits and overhangs: Improve tip positioning around architectural projections.
Recessed areas: Reach selected surfaces where access with a standard gun is restricted.
Commercial maintenance: Add flexibility when repainting compatible building surfaces.
Residential painting: Handle suitable overhead edges and elevated surfaces more conveniently.
Always use appropriate ladders, scaffolds, or access platforms when required. An extension does not replace approved fall-protection or access equipment.
When Should You Replace a Titan Pole Extension?
Bent or deformed pole: Physical damage may affect alignment and safe operation.
Damaged threads: Stripped or cross-threaded connections may prevent secure installation.
Leaking swivel: Leakage around the swivel requires immediate inspection and corrective service.
Stiff swivel movement: Binding or damaged swivel components may limit positioning.
Cracked or missing guard: A damaged guard must be replaced before spraying.
Unrepairable blockage: Hardened material or internal damage may make replacement necessary.
How to Install Titan 2437218 Pole Extension
High-pressure safety: Airless sprayers can cause serious fluid-injection injuries. Shut down the equipment, disconnect power, engage the trigger lock where specified, and complete the manufacturer's full pressure-relief procedure before opening any connection.
- Confirm that part 2437218 is suitable for the installed spray gun and equipment configuration.
- Verify the pressure rating of the extension, gun, hose, guard, and complete spray system.
- Shut down the sprayer and fully relieve pressure according to the equipment manual.
- Remove the existing spray tip and guard using the gun manufacturer's instructions.
- Inspect the gun outlet threads, seals, and connection surfaces.
- Attach the pole extension using the approved connection method without forcing threads.
- Check the swivel assembly for correct movement and secure installation.
- Install the included guard and an approved compatible spray tip.
- Inspect the assembled system before restarting the sprayer.
- Test according to the manufacturer's startup procedure and check for leaks from a safe position.
Cleaning and Maintenance Recommendations
Flush the extension after painting using the cleaning procedure and fluid approved for the coating and equipment. Complete pressure relief before removing or cleaning the extension.
Inspect the swivel for leakage, stiffness, or damage. Examine the guard, seals, threads, and pole body before each use. Replace damaged components rather than attempting unsafe modifications.
Store the cleaned extension in a dry location where it will not be bent, crushed, or exposed to unnecessary impact.
Related Titan Gun Extensions and Accessories
Titan 2437221 Pole Extension 6' with Swivel and Guard: A longer extension option for compatible applications requiring additional reach.
Titan 2418850 Gun Extension 10" Packaged: A compact extension listed as replacing Titan 651-071.
Titan 2418851 Gun Extension 20" Packaged: Intermediate-length extension listed as replacing Titan 651-072.
Titan 2418852 Gun Extension 30" Packaged: Longer gun extension listed as replacing Titan 651-073.
Titan 0289228 Tip Guard: Related guard accessory for appropriately configured airless spray systems. Confirm fitment before purchase.
Shop Titan Extension Pole Accessories
Buy Titan 2437218 Pole Extension 3' with Swivel and Guard
Add three feet of reach to your compatible airless spray gun with the Titan 2437218 pole extension. Order the listed replacement for Titan 310-390 from AllTitanParts.
Frequently Asked Questions
Common questions about Titan 2437218 specifications, compatible sprayers, replacement information, and maintenance.
What is Titan 2437218 Pole Extension?
Titan 2437218 is a three-foot airless spray gun pole extension supplied with a swivel and tip guard for compatible spraying equipment.
Does Titan 2437218 replace Titan 310-390?
Yes. Titan 2437218 is listed as the replacement for Titan 310-390, the earlier three-foot extension pole.
How long is Titan 2437218?
The pole extension measures three feet, equivalent to 36 inches or approximately 91.4 centimeters of nominal extension length.
Does Titan 2437218 include a swivel and guard?
Yes. The product is listed as a pole extension supplied with a swivel and guard. A separate spray tip is not confirmed as included.
Which Titan sprayers are listed as compatible?
The AllTitanParts product page specifically lists Impact 1040, Impact X 410, Impact X 440, and Impact X 540I. Verify compatibility with the installed spray gun.
Can Titan 2437218 be used with Impact 340 or Impact 400?
The extension appears in AllTitanParts accessory categories for these machines. Confirm the actual gun connection and pressure requirements before installation.
What is the purpose of the swivel?
The swivel provides additional positioning flexibility for the extension during spraying, especially when working on angled or overhead surfaces.
Can I use Titan 2437218 for ceiling painting?
Yes, when used with compatible equipment and appropriate safety procedures. The three-foot pole helps position the spray tip closer to elevated surfaces.
When should the pole extension be replaced?
Replace or professionally service the assembly if it develops structural damage, stripped threads, swivel leakage, or other defects that prevent safe operation.
Where can I buy Titan 2437218 Pole Extension?
Order the Titan 2437218 Pole Extension 3' with Swivel and Guard from AllTitanParts.
No reviews yet. Be the first to review this product!