Titan 241-007 Piston Seat (241/245)
Genuine Titan OEM Fluid Pump Component
Titan 241-007 Piston Seat is a genuine OEM replacement valve seat for compatible Titan Admiral and Hydra M4000 fluid pumps. Listed as item 11 in manufacturer parts diagrams, it provides the sealing interface for the piston check valve during professional pump maintenance.
Titan 241-007 Pump Compatibility
| Brand | Compatible Assembly | Part Number | Serviced With | Technical Detail |
|---|---|---|---|---|
| Titan | Admiral 245-556 Fluid Pump | 241-007 | Ball cage and seals | Official manual item 11, quantity 1. |
| Titan | Hydra M4000 245-555 Fluid Pump | 241-007 | Piston check-valve components | Official manual item 11, quantity 1. |
| Titan | Commander 245-555 Fluid Pump | 241-007 | Valve and packing components | Listed in AllTitanParts assembly catalog. |
Ordering Note: Confirm your pump assembly number and inspect the piston check valve before ordering. Ball, cage, O-rings and packing components are separately identified service parts and are not confirmed contents of the 241-007 package.
Titan OEM Piston and Outlet Valve Component
Titan 241-007 Piston Seat — Genuine OEM Fluid Pump Replacement
Titan 241-007 Piston Seat is the manufacturer-specified piston valve seat used in documented Titan Admiral and Hydra M4000 fluid pump assemblies. The component provides a mating surface for the piston check-valve ball, supporting controlled fluid movement and pressure development during pump operation. Titan identifies the part as item 11, quantity one, in the applicable fluid pump parts diagrams.
Titan 241-007 Piston Seat Overview
A reciprocating airless fluid pump relies on correctly operating inlet and piston check valves to move coating material through the displacement section. The piston seat is a critical part of the piston valve assembly because its sealing surface works with the corresponding check-valve ball.
When the ball seats correctly, it restricts reverse fluid flow through the piston valve during the appropriate portion of the pumping cycle. If the seat becomes pitted, scored or damaged, the valve may no longer seal consistently. This can contribute to internal leakage, reduced pressure retention, irregular pump performance or difficulty maintaining output.
Titan part 241-007 is separately identified in the manufacturer's fluid pump parts lists. Replacing a confirmed defective piston seat allows technicians to service the affected valve component without automatically replacing the complete pump assembly. The associated ball, cage, O-rings and packing components should also be inspected to determine whether additional replacement parts are required.
Titan 241-007 Technical Specifications and Product Information
| Specification | Technical and Commercial Information |
|---|---|
| Product Overview | Genuine Titan replacement piston seat for compatible fluid pump check-valve assemblies. |
| Manufacturer | Titan / SpeeFlo |
| Part Number | 241-007 |
| Official Description | Seat, piston |
| Primary Function | Provides the sealing interface for the piston check-valve ball. |
| Industrial Applications | Professional airless sprayer servicing, industrial coating equipment maintenance, piston valve repair and fluid pump rebuilding. |
| Manufacturer-Documented Assemblies | Admiral 245-556 Fluid Pump; Hydra M4000 245-555 Fluid Pump. |
| Additional Catalog Application | Commander 245-555 Fluid Pump, as listed in the AllTitanParts catalog. Confirm the actual pump configuration. |
| Manual Diagram Item | 11 |
| Required Quantity | 1 per documented fluid pump assembly. |
| Related Parts | 240-022 Ball Cage; 241-109 Ball Stop Pin; 891-403 PTFE O-Ring; 892-281 O-Ring; 920-103 Stainless Steel Ball; 245-009 Displacement Rod. |
| Common Problems | Damaged sealing surface, internal valve leakage, pressure instability and inconsistent fluid delivery where the piston check valve is defective. |
| Coating Systems | Compatible Titan airless coating systems using the specified 245-series displacement pump assemblies. |
| OEM and Brand | Titan OEM replacement component. |
| Package Contents | Piston seat. Verify whether any additional seals or hardware are supplied by the seller. |
| Commercial Benefits | Targeted check-valve servicing, accurate part identification, improved sealing when replacing a defective seat and reduced unnecessary assembly replacement. |
Titan 241-007 Compatible Fluid Pump Assemblies
The following table separates manufacturer-documented applications from additional catalog fitment information.
| Machine / Pump | Pump Assembly | Seat Part | Item / Qty. | Documentation |
|---|---|---|---|---|
| Titan Admiral | 245-556 Fluid Pump | 241-007 | 11 / 1 | Titan Admiral manual |
| Titan Hydra M4000 | 245-555 Fluid Pump | 241-007 | 11 / 1 | Titan Hydra manual |
| Titan Commander | 245-555 Fluid Pump | 241-007 | Check installed diagram | AllTitanParts catalog listing |
Compatibility Notice: The number 245-555 identifies a fluid pump assembly in the Hydra documentation. Do not confuse the pump assembly number with the 241-007 replacement part number. Verify the actual pump parts diagram and installed equipment before purchase.
How the Titan 241-007 Piston Seat Works
The piston check valve controls fluid movement through the reciprocating displacement pump. Its ball and seat operate together, opening and closing in response to pressure differences as the pump piston changes direction.
During the portion of the cycle when the piston valve opens, coating material passes through the appropriate internal flow path. When the valve closes, the ball contacts the piston seat and restricts reverse flow. This sealing action contributes to the pressure and displacement characteristics of the pump.
The piston seat must maintain a suitable contact surface for the valve ball. Abrasive coatings, contamination, corrosion or prolonged service may damage that surface. If inspection reveals a defective seat, replacement should be considered alongside the condition of the corresponding ball and other valve components.
Related Titan Piston and Fluid Pump Components
| Part Number | Component | Diagram Item | Inspection Consideration |
|---|---|---|---|
| 920-103 | Stainless Steel Ball | 7 | Inspect the corresponding pump valve components. |
| 240-001 | Packing Set | 2 and 10 | Check packing condition during pump service. |
| 240-022 | Ball Cage | 12 | Inspect for wear and damage. |
| 241-109 | Ball Stop Pin | 12a | Check retention and condition. |
| 891-403 | PTFE O-Ring | 13 | Inspect for damage or deformation. |
| 892-281 | O-Ring | 14 | Inspect sealing condition. |
| 245-018 | Foot Valve | 15 | Inspect inlet valve operation. |
| 314-180 | Stainless Steel Ball | 16 | Inspect the foot-valve ball. |
| 245-009 | Displacement Rod | 18 | Check wear and connected piston components. |
These are related parts in the documented fluid pump assembly, not confirmed contents of the 241-007 package. The 920-103 and 314-180 balls are separate diagram items; verify their locations and specifications before replacement.
Common Piston Seat Problems and Troubleshooting
| Symptom | Possible Cause | Recommended Inspection |
|---|---|---|
| Difficulty maintaining pressure | Internal valve leakage or other pump wear | Inspect piston seat, valve ball and packing components. |
| Irregular fluid output | Check-valve contamination, wear or restriction | Inspect inlet and piston valves and confirm proper priming. |
| Visible pitting on the seat | Abrasive wear, corrosion or contamination | Evaluate the seat and ball for replacement. |
| Internal fluid backflow | Piston valve not sealing correctly | Check the ball-to-seat contact surfaces and related seals. |
| Recurring pump performance problems | Multiple worn or incorrectly assembled components | Review the complete displacement pump assembly. |
These symptoms do not prove that the piston seat is defective. Air supply problems, damaged packings, inlet restrictions, worn balls and other pump faults can produce similar symptoms.
Titan 241-007 Installation and Maintenance Guidelines
Before servicing the fluid pump, turn off the equipment, isolate its power source and follow the complete pressure-relief procedure in the applicable Titan manual. Never disassemble a pressurized pump or loosen a fluid connection while pressure remains in the system.
Identify the installed fluid pump assembly and locate item 11 in the correct exploded diagram. Carefully disassemble the relevant valve components according to manufacturer instructions, noting the orientation and order of the parts.
Inspect the piston seat for pitting, scoring, corrosion or damaged sealing surfaces. Examine the associated valve ball, cage, O-rings and displacement rod. Replace any components that fail the applicable service inspection.
Reassemble the pump using the specified parts and approved service procedures. Do not guess tightening torque, seal orientation or component interchangeability. After assembly, carry out the prescribed leak and operating checks before returning the sprayer to service.
Important Airless Sprayer Safety Information
High-pressure airless spraying equipment presents fluid-injection and stored-pressure hazards. Disconnecting an air motor or stopping the pump does not automatically relieve pressure trapped in the fluid system.
Always follow the manufacturer's pressure-relief procedure, use appropriate protective equipment and keep hands away from pressurized leaks. Service work should be performed by personnel familiar with the applicable Titan pump and its safety requirements.
Titan Piston Seat Parts and Manufacturer Documentation
Use the product, assembly and manufacturer documentation links below to review related components and identify the correct replacement part.
Buy Genuine Titan 241-007 Piston Seat
Maintain your Titan fluid pump with the correct OEM piston valve seat. Match the installed pump assembly, confirm the part number and inspect the related check-valve components before ordering.
Shop Titan 241-007 Piston SeatFrequently Asked Questions About Titan 241-007
No reviews yet. Be the first to review this product!