Titan 2405986 Trigger Pin
Restore secure trigger movement with the Titan 2405986 Trigger Pin. This replacement pin supports the pivot connection in compatible Titan spray gun trigger assemblies, helping maintain proper trigger alignment and mechanical operation when the original pin is worn, damaged, missing, or no longer securely retained.
Repair Application: Worn, damaged, or missing trigger pins.
Ordering: Titan 2405986 Trigger Pin.
Fitment & Safety: Confirm the spray gun model, trigger assembly, and original pin part number before ordering. Always relieve spray system pressure and verify trigger-lock operation after servicing.
Titan 2405986 Trigger Pin & Retaining Clip
Repair the trigger pivot connection of compatible Titan airless spray guns with the Titan 2405986 Trigger Pin. This replacement service kit supplies a trigger pin and retaining clip for Titan RX-80 and RX-Pro spray guns, helping secure the trigger assembly and maintain smooth mechanical movement during spraying.
How Does the Titan 2405986 Trigger Pin Work?
The trigger pin provides a mechanical pivot point for the spray gun trigger assembly. When the operator pulls the trigger, the trigger rotates around its supporting connection and operates the gun's internal fluid-control mechanism.
The retaining clip secures the pin in the designated position, helping prevent the pivot hardware from moving out of the trigger assembly during normal operation.
The Titan 2405986 service kit provides the pin and retaining clip together. This makes it useful when replacing worn pivot hardware or servicing applicable earlier RX-series trigger fastening arrangements.
Compatible Titan Spray Guns
| Spray Gun | Compatibility Details | Diagram Reference |
|---|---|---|
| Titan RX-80 | Trigger pin and clip service application for compatible RX-80 trigger configurations. | Pin Item 2; retaining clip Item 14 |
| Titan RX-Pro | Trigger pin and clip service application for compatible RX-Pro trigger configurations. | Pin Item 2; retaining clip Item 17 |
Compatibility is based on the spray gun trigger assembly, not simply the sprayer model. Inspect the installed gun and its trigger fastening design before ordering.
Common Trigger Pin Problems
Worn or incorrectly retained pivot hardware can allow excessive trigger movement.
Without the correct clip, the pin may not remain securely positioned.
A bent or worn pin may interfere with normal trigger travel.
Incorrect pivot hardware installation may prevent the trigger from operating correctly.
A trigger pin replacement will not repair a damaged internal spray gun valve, worn needle seat, or leaking fluid seal. Diagnose those components separately.
Installation & Maintenance Guidance
1. Relieve pressure. Follow Titan's complete pressure-relief procedure before handling the spray gun trigger mechanism.
2. Disable the sprayer. Switch off the equipment and disconnect its power source as directed by the manufacturer.
3. Confirm compatibility. Identify the RX-80 or RX-Pro gun and verify the correct trigger pivot arrangement.
4. Inspect the original hardware. Examine the trigger pin, retaining clip, and surrounding pivot surfaces for wear or damage.
5. Follow the manufacturer's service procedure. Remove damaged fastening hardware and install the replacement pin in the specified orientation.
6. Secure the retaining clip. Confirm that the clip is correctly seated and the pin cannot migrate out of its intended position.
7. Check trigger movement. With the gun depressurized, verify normal trigger travel and proper trigger-lock engagement.
8. Test before use. Complete all prescribed manufacturer safety and functional checks before returning the gun to spraying service.
Related Titan RX-Series Trigger Parts
Complete two-finger trigger assembly for compatible RX-80 and RX-Pro spray guns.
Four-finger trigger and locking assembly for the designated RX-series gun configurations.
Separate retractor pin component identified in RX-80 and RX-Pro exploded diagrams.
Individual pin reference identified as Item 2 in Titan's RX-series parts lists.
Buy Titan 2405986 Trigger Pin Kit
Order Titan 2405986 from AllTitanParts for compatible RX-80 and RX-Pro spray gun trigger repairs. Replace worn or missing pivot hardware with the correct pin-and-clip service kit and maintain secure trigger operation.
Frequently Asked Questions
What is Titan 2405986 Trigger Pin?
It is a trigger pivot pin and retaining clip service kit for compatible Titan RX-80 and RX-Pro airless spray guns.
Does Titan 2405986 replace Titan 538425?
Titan 2405986 is listed as a service replacement for the original 538425 trigger pin application and includes the corresponding retaining clip.
Which Titan spray guns use part 2405986?
Documented applications include the Titan RX-80 and RX-Pro airless spray gun families.
Does the Titan 2405986 kit include the retaining clip?
Yes. Supplier service documentation identifies one trigger pin and one retaining ring clip in the kit.
Can Titan 2405986 repair a loose spray gun trigger?
It may correct looseness caused by damaged or missing trigger pivot hardware. If the trigger body, lock mechanism, or surrounding mounting components are damaged, additional repairs may be necessary.
No reviews yet. Be the first to review this product!