Titan 14068 100 Mesh Filter
OEM Titan Fluid Filtration Component
Titan 14068 100 Mesh Filter is a genuine OEM outlet filter element used to trap debris and particles in the fluid path before they reach the spray tip on compatible SprayTECH EP-series sprayers, protecting internal components and maintaining consistent spray quality.
Compatibility Table
A clogged, torn, or missing filter causes uneven spray, poor atomization, pressure fluctuations, and premature tip wear. Replacement restores proper flow and filtration efficiency.
SprayTECH Outlet Filtration Component
Titan 14068 100 Mesh Filter for EP-Series Sprayers
Titan 14068 is the OEM 100-mesh outlet filter element specified for the SprayTECH EP2300 series. It captures particles, dried paint skins, and other debris before they enter the spray tip, helping maintain a uniform spray pattern, reduce tip clogs, and protect internal pump components from abrasive damage.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | Genuine OEM 100-mesh outlet filter element used in the dump valve assembly of compatible SprayTECH EP-series piston pump sprayers. |
| Function | Traps particles of 149 microns and larger to keep the spray tip clean, prevents abrasive solids from damaging piston and seal assemblies, and eliminates clog-induced spitting or fan-pattern distortion. |
| Replacement Triggers | Clogged screen causing reduced flow or pulsation, visible tears or holes, fluid bypassing due to a worn seal, or as part of routine maintenance every 3-6 months. |
| Industrial Applications | Professional sprayer fluid system maintenance and restoration of proper filtration and flow. |
| Compatible SprayTECH Machines | EP2300, EP2300se, EP2400, EP2510, and Wagner ST595. Listed as item 2, "Filter Sieve (100 Mesh)," in the Dump Valve Assembly (Figure 26) of the official EP2300 service manual, noted as an optional alternative to the standard 50-mesh sieve. Parts databases confirm compatibility with the EP2300 series and Wagner ST595. |
| OEM Part Number | 14068 100 Mesh Filter (also listed as 014068). |
| Related Parts Commonly Serviced Together | Filter body 0294194, filter support 9894245, and O-ring 14072. Inspect these during filter replacement. |
| Common Problems Solved | Reduced spray pressure, pulsation at the tip, uneven fan pattern, frequent tip clogs, and abrasive damage to internal pump components caused by a compromised filter. |
| Target Users / Markets | Painting contractors, maintenance crews, rental fleet operators, and repair shops servicing SprayTECH EP-series sprayers. |
| OEM and Brand Information | Genuine SprayTECH replacement component documented in the official EP2300 service manual. |
| Commercial Benefits | Low-cost OEM filter that protects the spray tip and internal pump components from debris, ensuring consistent spray quality and extending equipment life. |
The 14068 100 Mesh Filter is installed in the dump valve assembly. Inspect the filter after every use or when you notice a drop in performance. Replace immediately if the screen is damaged, clogged beyond cleaning, or if the housing seal leaks. 100 mesh is ideal for most paints and clears; for very thick or textured coatings, a coarser filter like 60 mesh may be required.
Frequently Asked Questions
Quick answers for confirming fitment, function, and replacement timing.
No reviews yet. Be the first to review this product!
