Titan 0558740 Repacking Kit
Maintain your airless sprayer's fluid-section sealing system with the Titan 0558740 Repacking Kit. Designed for servicing the designated Titan pump configuration, this replacement kit supports worn-packing maintenance, helps address fluid leakage caused by deteriorated seals, and contributes to dependable pump performance when correctly installed.
Maintenance Application: Fluid-section servicing and leakage-related repairs.
Commercial Use: Professional airless paint sprayer maintenance and repair.
Titan 0558740 Repacking Kit – Restore Pump Sealing & Performance
Keep your professional airless sprayer operating with the correct replacement packing components. The Titan 0558740 Repacking Kit is a manufacturer-specified service kit for designated Titan Impact fluid sections. It replaces worn internal packing and sealing components to help correct leakage, restore effective fluid sealing, and support dependable pump operation.
How Titan 0558740 Repacking Kit Restores Pump Performance
An airless sprayer's fluid section operates through repeated high-pressure pumping cycles. Internal packings help seal moving components, while O-rings and valve seals help maintain fluid containment at designated sealing surfaces.
Over time, normal wear, abrasive coating materials, inadequate lubrication, and damage to mating components can reduce sealing effectiveness. This may lead to leakage, irregular pump performance, or difficulty maintaining pressure.
Repacking replaces the specified service components. For a durable repair, inspect the piston rod, housings, valve seats, and other mating surfaces for scoring, corrosion, or excessive wear.
Common Symptoms of Worn Pump Packings
Coating material may escape around worn fluid-section sealing areas.
Damaged seals can contribute to difficulty maintaining consistent pressure.
Internal leakage may cause the pump to cycle more frequently than expected.
Worn packing or valve components may contribute to inefficient fluid delivery.
These symptoms may also result from worn valve seats, damaged piston components, clogged filters, or other pump faults. Diagnose the fluid section before replacing parts.
Installation & Fluid Section Service Guidance
1. Relieve system pressure. Follow the Titan pressure-relief procedure and disconnect electrical power.
2. Confirm the correct kit. Verify that your model's fluid-section diagram identifies repacking kit 0558740.
3. Disassemble the fluid section. Follow the model-specific service manual and retain the correct assembly orientation.
4. Inspect mating components. Examine the piston rod, housings, valve seats, and sealing surfaces for wear or damage.
5. Install replacement components. Follow Titan's specified packing orientation, lubrication, insertion tools, and assembly procedures.
6. Reassemble and test. Verify proper sealing and pump operation in accordance with the manufacturer's instructions.
Related Titan Parts Commonly Inspected During Repacking
Order Titan 0558740 Repacking Kit
Maintain the fluid section of your compatible Titan Impact 1040 or 1140 series sprayer with the correct replacement packing kit from AllTitanParts. Review the manufacturer parts diagram, inspect the piston and valve components, and order the parts needed for a complete, properly planned repair.
Frequently Asked Questions
Answers about Titan 0558740 compatibility, kit contents, and pump servicing.
What is Titan 0558740 Repacking Kit?
It is a manufacturer-specified service kit containing designated packing, sealing, and valve-related components for compatible Titan Impact fluid sections.
Which Titan sprayers use kit 0558740?
Titan's service guide lists Impact 1040, Impact 1140, Impact 1140I, and Impact 1140IA.
What components are included in this kit?
The Impact 1040 diagram identifies a spacer, upper and lower packing assemblies, wear ring, Viton and PTFE O-rings, outlet valve seal and ball, washer, inlet ball, and an additional O-ring. Refer to the components table above for exact part numbers and quantities.
Does Titan 0558740 fit the Impact 1040T?
The Impact 1040T is listed with repacking kit 800-730. Do not substitute 0558740 without manufacturer confirmation.
Can worn packings cause pressure loss?
Yes. Worn packings can allow internal leakage, but pressure loss can also result from damaged valves, worn piston components, or other system faults.
Does the kit include a new piston rod?
No piston rod is identified in the manufacturer's kit contents list. The piston rod is a separate service component.
Should I inspect other pump parts during repacking?
Yes. Inspect the piston rod, upper and lower housings, valve seats, and other mating components for damage before installing new packings.
No reviews yet. Be the first to review this product!