Titan part 2440407 is a coarse filter designed for use on Impact X 540 I, X440, and X 410 airless sprayers. This filter traps large debris and particles before they enter the pump, protecting internal components and preventing tip clogs. Replacing a clogged or damaged coarse filter restores proper flow, improves pump protection, and ensures reliable spraying performance.
| Part Number | 2440407 |
|---|---|
| Part Description | Coarse Filter |
| Brand | Titan |
| Fits | Impact X 540 I, X440, X 410 |
| Condition | New |
The Titan 2440407 Coarse Filter is a genuine OEM filtration component designed for Impact X 540 I, X440, and X 410 airless sprayers. Installed in the fluid inlet path, it captures large debris, dried paint flakes, and other contaminants before they reach the pump's inlet valve and fluid section. This coarse filter provides an essential first line of defense against pump damage and tip clogs.
Over time, the coarse filter can become clogged with debris, restricting material flow and causing the sprayer to starve for material. A clogged filter leads to difficulty priming, pressure loss, erratic spray, and reduced output. Replacing with the correct 2440407 filter restores proper flow, ensures pump protection, and helps maintain consistent spray performance.
| Debris capture | Traps large particles before they enter the pump |
|---|---|
| Pump protection | Prevents inlet valve and seal damage |
| Flow maintenance | Ensures consistent material delivery |
| Clogged | Visible debris that cannot be cleaned |
|---|---|
| Damaged screen | Tears or holes that allow debris to pass through |
| Reduced flow | Sprayer struggles to draw material |
| Difficulty priming | Pump cannot establish prime |
Titan part 2440407 is compatible with the following models. Always confirm fitment using the correct parts diagram for your exact model and serial number.
| Model | Component |
|---|---|
| Impact X 540 I | Coarse Filter |
| Impact X440 | Coarse Filter |
| Impact X 410 | Coarse Filter |
When replacing the coarse filter, inspect these related components for wear or damage.
Debris that passes a damaged filter can affect the inlet valve; inspect and clean.
Check the suction hose and strainer for cracks or clogs.
If the filter failed, inspect fluid section seals for abrasive wear.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
