

0551533 is a repacking kit containing all necessary seals and packings to rebuild the pump fluid section on compatible RentSpray and Spraytech airless sprayers. It restores pressure, priming ability, and sealing integrity when the original packings wear out or fail.
| Part Number | 0551533 |
|---|---|
| Part Description | Repacking Kit |
| Brand | RentSpray / Spraytech |
| Fits | RentSpray 400; Spraytech Advantage EPX2155, EPX2255 |
| Condition | New |
The 0551533 Repacking Kit is an OEM seal and packing kit designed for the pump fluid section of RentSpray 400 and Spraytech Advantage EPX2155 / EPX2255 airless sprayers. It includes all the wear‑prone elastomeric components needed to restore hydraulic sealing when the pump loses pressure, fails to prime, or leaks past the piston rod.
Over time, piston packings harden, O‑rings crack, and backup rings deform. A repacking kit addresses these common failure points without replacing the entire fluid section. Using the 0551533 restores consistent pressure, reliable priming, and extends pump life.
| Seal replacement | Replaces worn piston packings and O‑rings |
|---|---|
| Restores pressure | Eliminates internal bypass and pressure loss |
| Improves priming | Restores pump's ability to draw and hold prime |
| Pressure loss | Pump won't reach or maintain operating pressure |
|---|---|
| Hard starting / no prime | Pump runs but won't draw paint or build pressure |
| Leaking packings | Paint leaking from weep hole or around piston rod |
| Routine maintenance | Scheduled repacking after hours of use or annually |
Part 0551533 is compatible with the following models. Always verify with your machine's parts diagram before ordering.
| Brand / Model | Component |
|---|---|
| RentSpray 400 | Repacking kit (pump seals and packings) |
| Spraytech Advantage EPX2155 | Repacking kit |
| Spraytech Advantage EPX2255 | Repacking kit |
When using the repacking kit, these related components are often inspected or replaced at the same time.
A scored or bent rod will damage new packings; inspect and replace if worn.
Check the bore for scoring or out‑of‑round condition.
Use a proper tool (e.g., 0551509) to avoid damaging new seals.