Titan part 106-002A is a repacking set designed to rebuild the pump fluid section on compatible Titan PowrBeast, PowrLiner, and PowrTwin airless sprayers and lining systems. This kit contains all the seals, packings, and O‑rings required to restore pump performance and prevent fluid leaks. Replacing worn packings with this genuine Titan set restores consistent pressure, reliable priming, and extends the life of your equipment.
| Part Number | 106-002A |
|---|---|
| Part Description | Repacking Set |
| Brand | Titan |
| Fits | PowrBeast 4700, 7700, 9700; PowrLiner 4950, 6950, 4955, 6955, 8955; PowrTwin 4900, 6900, 8900, 12000 Plus |
| Condition | New |
The Titan 106-002A Repacking Set is a genuine OEM seal kit designed to rebuild the pump fluid section of many Titan airless sprayers and lining systems. It includes all the necessary packings, O‑rings, and seals to restore hydraulic integrity, prevent fluid bypass, and eliminate leaks. A properly packed pump delivers consistent pressure, maintains prime, and ensures reliable operation.
Over time, the packings inside the pump can wear, harden, or become damaged due to normal use, abrasive coatings, or chemical exposure. Worn packings lead to loss of pressure, erratic spray patterns, and fluid leakage. Using this genuine Titan repacking set restores the pump to original performance and extends the service life of the equipment.
| Seals the piston | Creates a leak‑tight seal between the piston and cylinder wall |
|---|---|
| Prevents fluid bypass | Stops material from leaking past the piston, maintaining pressure |
| Restores pump efficiency | Ensures full material flow and consistent output |
| Loss of pressure | Pump runs but output is weak or inconsistent |
|---|---|
| Fluid leaks from pump | Visible material seeping from fluid section |
| Difficulty priming | Pump will not draw material or loses prime easily |
| During scheduled maintenance | Replace packings as part of routine pump overhaul |
Part 106-002A is compatible with the following Titan equipment. Always verify fitment using the correct parts diagram for your exact model and serial number.
| Model | Component Application |
|---|---|
| PowrBeast 4700 | Repacking set (pump fluid section) |
| PowrBeast 7700 | Repacking set (pump fluid section) |
| PowrBeast 9700 | Repacking set (pump fluid section) |
| PowrLiner 4950 | Repacking set (pump fluid section) |
| PowrLiner 6950 | Repacking set (pump fluid section) |
| PowrLiner 4955 | Repacking set (pump fluid section) |
| PowrLiner 6955 | Repacking set (pump fluid section) |
| PowrLiner 8955 | Repacking set (pump fluid section) |
| PowrTwin 4900 | Repacking set (pump fluid section) |
| PowrTwin 6900 | Repacking set (pump fluid section) |
| PowrTwin 8900 | Repacking set (pump fluid section) |
| PowrTwin 12000 Plus | Repacking set (pump fluid section) |
When repacking the pump, it is common to inspect or replace these additional components.
If the piston or rod is scored, replace it along with the packings.
Worn inlet/outlet valves can mimic packing failure; inspect and rebuild if necessary.
Inspect the cylinder bore for scoring that could cause premature packing wear.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
