Titan part 0533525 is a pipe plug used to seal unused threaded ports on the AirCoat 423 spray system. Common applications include capping test ports, unused manifold outlets, or drain openings to prevent fluid leakage and contamination.
| Part Number | 0533525 |
|---|---|
| Part Description | Pipe Plug |
| Brand | Titan |
| Fits |
|
| Condition | New |
The Titan 0533525 Pipe Plug is an OEM threaded plug designed for the AirCoat 423 spray system. It is used to seal unused female ports on manifolds, pump housings, or fluid passages, preventing leakage, contamination, and pressure loss.
Pipe plugs can become damaged due to overtightening, corrosion, or thread galling. A missing or damaged plug can cause fluid leaks, air ingestion, or debris entry. Replacing with an OEM pipe plug ensures correct thread fit, proper sealing, and reliable operation.
| Seals unused ports | Prevents fluid leaks from inactive threaded openings |
|---|---|
| Contamination barrier | Keeps dirt and debris out of the fluid system |
| Pressure retention | Maintains system pressure by closing off unneeded passages |
| Cracked or broken plug | Visible damage from overtightening or impact |
|---|---|
| Stripped threads | Plug spins or will not tighten properly |
| Corrosion or pitting | Rust or chemical attack compromising seal |
| Persistent leakage | Fluid seeps past the plug even after proper installation |
Titan part 0533525 is a direct replacement pipe plug for the following spray system. Verify thread size (e.g., 1/8″ NPT, 1/4″ NPT) and type using your parts diagram.
| Brand / Model | Components |
|---|---|
| AirCoat 423 | Pipe Plug |
When replacing a pipe plug, inspect or replace these associated components for a complete seal repair.
Use fresh sealant rated for paint solvents on tapered threads. Do not use tape on straight threads.
Inspect for damage or debris that could prevent a proper seal.
If the plug was removed for access, check nearby fittings for leaks.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
