SprayTech part 0277368 is a foam insert used in compatible CS series sprayers to provide cushioning, vibration dampening, or thermal insulation for internal components. This foam helps protect sensitive parts from shock and reduces operational noise. Replace a deteriorated, compressed, or damaged foam insert to maintain proper component support and protection.
| Part Number | 0277368 |
|---|---|
| Part Description | Insert Foam |
| Brand | SprayTech |
| Fits | CS8100, CS9100S, CS9900, CS9960 |
| Condition | New |
The 0277368 foam insert is a protective component used in SprayTech CS8100, CS9100S, CS9900, and CS9960 sprayers. It is strategically placed within the sprayer housing to provide cushioning for sensitive components, reduce vibration and operational noise, and may also serve as thermal insulation for temperature-sensitive parts.
Over time, foam can deteriorate due to exposure to heat, chemicals, or simple aging. It may become brittle, crumble, compress permanently, or absorb moisture. A degraded foam insert can lead to increased vibration, component movement, noise, or inadequate protection for internal parts. Replacing it with this genuine SprayTech foam restores proper component support and maintains the sprayer's operational integrity.
| Component protection | Cushions sensitive parts from shock and vibration |
|---|---|
| Noise dampening | Reduces operational noise by absorbing vibrations |
| Thermal insulation | May protect components from temperature extremes |
| Crumbled / deteriorated | Foam breaking apart or turning to dust |
|---|---|
| Compressed / flattened | No longer provides adequate cushioning |
| Oil / chemical soaked | Absorbed fluids may cause degradation |
| Missing | Foam lost during service or operation |
SprayTech part 0277368 is designed for use on the following CS series sprayers. Always verify fitment and placement by consulting your machine's parts manual.
| SprayTech Model | Component |
|---|---|
| CS8100 | Foam insert |
| CS9100S | Foam insert |
| CS9900 | Foam insert |
| CS9960 | Foam insert |
When replacing foam inserts, inspect these associated components for wear or damage.
Check rubber mounts for deterioration; replace if cracked or loose.
Inspect seals for compression set or damage.
Ensure wires are not chafing against housing where foam may be missing.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
