Titan 0516304 Upper Cage
Restore your pump's internal valve assembly with the Titan 0516304 Upper Cage, a replacement component identified in the Titan Impact 340 and Impact 400 piston assembly. The upper cage helps retain and position the outlet valve components during reciprocating pump operation. Replace a worn, cracked, or damaged cage to support proper valve movement and dependable fluid delivery. Designed for the designated Titan 0532204A Piston Assembly, this component is an important maintenance option when servicing internal pump wear. Order by exact part number 0516304 for accurate fitment.
Related Piston Assembly: Titan 0532204A.
Repair Tip: Inspect the outlet valve ball, valve seat, and piston components during servicing. A damaged cage may affect valve operation, but pressure problems can also result from worn packings or other fluid-section defects.
Restore Outlet Valve Support with Titan 0516304 Upper Cage
Maintain your airless sprayer's internal pump assembly with the Titan 0516304 Upper Cage, a replacement component for the Titan Impact 340 and Titan Impact 400 Airless Sprayers. Identified as item 21 in the Drive Assembly II parts diagram, this upper cage is part of the Titan 0532204A Piston Assembly. It helps maintain the intended position and operating arrangement of the outlet valve components within the reciprocating fluid pump. When the existing cage becomes worn, cracked, or deformed, replacing it with the correctly specified component supports accurate reassembly and dependable pump operation.
Titan 0516304 Upper Cage Compatible Machines
The Titan 0516304 Upper Cage is identified in the following Titan airless sprayer parts manuals:
- Titan Impact 340 Airless Sprayer
- Titan Impact 400 Skid Airless Sprayer
- Titan Impact 400 Cart Airless Sprayer
The component appears as item 21 in the Drive Assembly II diagram. It is part of the Titan 0532204A Piston Assembly, which includes items 20–24. The accompanying valve components are the 50164 Outlet Valve Ball, 0512343 Outlet Valve Seat, and 0512342 Outlet Valve Retainer.
Fitment reminder: Do not confuse Titan 0516304 with other upper cage part numbers, such as 704-610 or 0507452. Those components are listed for different pump assemblies and equipment families.
What Does the Titan 0516304 Upper Cage Do?
The Titan Impact 340 and Impact 400 use reciprocating piston pumps to move coating material from the supply container into the pressurized fluid system. Internal inlet and outlet valves control the direction of fluid movement during the piston stroke.
The Titan 0516304 Upper Cage is an internal component of the piston outlet-valve assembly. It provides the specified cage structure for the associated valve components, helping maintain their intended relationship within the piston assembly.
The outlet valve ball and seat work together to control reverse flow. The upper cage supports the valve arrangement while allowing the components to function according to the pump's design. Correct positioning matters because damaged or improperly assembled valve parts may interfere with normal pumping.
A worn or deformed cage may affect the internal movement or placement of the valve components. However, pressure loss can also result from a worn outlet valve ball, damaged seat, deteriorated packings, or other fluid-section problems.
For reliable repairs, inspect the entire piston outlet-valve assembly rather than replacing the upper cage solely because the sprayer has difficulty building pressure.
When Should You Replace the Titan 0516304 Upper Cage?
Visible cracks: Fractures in the cage structure can compromise its ability to support the internal valve arrangement.
Deformation: A bent or distorted cage may prevent the valve components from moving or seating as intended.
Excessive contact wear: Inspect surfaces that contact or guide associated valve components for unusual wear.
Damage during disassembly: Replace the cage if it becomes cracked, distorted, or otherwise unsuitable for reinstallation during pump servicing.
Confirmed valve assembly malfunction: If troubleshooting identifies the cage as the defective component, install the correctly specified replacement and inspect the ball, seat, and retainer.
Titan 0516304 Upper Cage Inspection and Replacement Guide
Safety: High-pressure airless spraying equipment can cause serious fluid-injection injuries. Always follow Titan's complete pressure-relief and service procedures before opening the fluid section.
Step 1: Prepare the sprayer. Shut down the machine, disconnect power where applicable, and perform the prescribed pressure-relief procedure.
Step 2: Identify the correct assembly. Consult the Impact 340 or Impact 400 parts manual. Locate the 0532204A Piston Assembly and identify 0516304 as item 21.
Step 3: Access the outlet valve components. Follow the manufacturer's piston and outlet-valve disassembly instructions. Use appropriate tools and avoid damaging the piston or sealing surfaces.
Step 4: Inspect the upper cage. Check for cracks, deformation, wear, or damage to surfaces that support the outlet-valve arrangement.
Step 5: Inspect adjacent parts. Examine the 50164 Outlet Valve Ball, 0512343 Outlet Valve Seat, and 0512342 Outlet Valve Retainer. Replace defective parts as required by the service procedure.
Step 6: Install the replacement cage. Position Titan 0516304 according to the manufacturer's assembly sequence. Ensure the valve components are correctly installed and retained.
Step 7: Reassemble and test. Restore the piston and fluid-section components, then complete the specified priming, leak, and pressure checks before returning the sprayer to service.
Related Titan Impact 340 and Impact 400 Outlet Valve Parts
The following components appear in the same piston assembly and should be inspected during upper cage replacement.
Titan 0516304 is listed as an individual component. Other related parts are not assumed to be included unless the seller expressly identifies them in the package.
Buy Titan 0516304 Upper Cage
Order the Titan 0516304 Upper Cage from AllTitanParts for compatible Impact 340 and Impact 400 airless sprayers. Replace a confirmed damaged cage and restore the correct internal outlet-valve arrangement without unnecessarily replacing unrelated pump components.
Shop Titan 0516304 Upper CageFrequently Asked Questions
Find answers about Titan 0516304 Upper Cage compatibility, function, inspection, and replacement.
What is Titan 0516304 Upper Cage?
It is an internal upper cage component used in the outlet-valve arrangement of the Titan 0532204A Piston Assembly.
Which Titan sprayers use the 0516304 Upper Cage?
Titan's parts manuals identify the Impact 340 and Impact 400. Confirm your exact machine configuration before ordering.
Does Titan 0516304 fit the Impact 400 Cart and Skid?
Yes, the Impact 400 parts diagram lists 0516304 for the specified piston assembly in cart and skid configurations.
What is the diagram item number for Titan 0516304?
It is item 21 in the Impact 340 and Impact 400 Drive Assembly II parts diagram.
Is Titan 0516304 included in the 0532204A Piston Assembly?
The manufacturer's diagram identifies 0532204A as including items 20–24, which includes item 21, the 0516304 Upper Cage. Confirm the current package contents when purchasing the complete assembly.
What other outlet valve components work with the upper cage?
The associated components are Titan 50164 Outlet Valve Ball, Titan 0512343 Outlet Valve Seat, and Titan 0512342 Outlet Valve Retainer.
When should I replace the upper cage?
Replace it when inspection confirms cracks, deformation, excessive wear, or damage that prevents correct outlet-valve assembly.
Can a damaged upper cage cause pressure problems?
Potentially, if damage interferes with outlet-valve operation. However, worn valve balls, seats, packings, and other fluid-section defects can also cause pressure problems.
Is Titan 0516304 interchangeable with Titan 704-610?
Do not assume interchangeability. These are different part numbers used in different pump configurations. Follow the exact parts list for your machine.
Where can I buy Titan 0516304 Upper Cage?
Order the Titan 0516304 Upper Cage at AllTitanParts after confirming the correct machine and piston assembly.
No reviews yet. Be the first to review this product!