Titan 0295542 Tube Siphon
OEM SprayTech Fluid Intake Component
Titan 0295542 Siphon Tube is a genuine fluid intake component for the SprayTech Airless EP2205 sprayer. This rigid pickup tube draws coating material from the supply container into the pump and works with an integrated filter screen to prevent debris from entering the system.
Compatibility
Inspect the siphon tube and screen before each use. Clean the screen with solvent and a soft brush. Do not use metal tools that could damage the mesh. Ensure the tube is straight and mounting threads are undamaged. Replace if bent, cracked, or if the screen is torn.
SprayTech Fluid Intake Replacement
Titan 0295542 Siphon Tube for SprayTech Airless EP2205
Titan 0295542 is a siphon tube specifically engineered for the SprayTech Airless EP2205 professional airless paint sprayer. This rigid pickup tube extends from the pump inlet downward into the material container, providing the critical fluid pathway through which coating material is drawn into the pumping mechanism. The siphon tube works with an integral filter screen to prevent debris from entering the pump while maintaining uninterrupted material flow. Constructed from corrosion-resistant materials, it withstands the chemical attack of solvents, water-based coatings, and abrasive pigments. Failure modes include bending or kinking from impact, cracks at the mounting interface, clogging of the inlet screen, and chemical degradation. Replacement restores reliable priming and consistent fluid delivery.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | Genuine OEM siphon tube for the SprayTech EP2205 piston pump. Confirmed compatible by multiple independent parts references including Fix.com, eReplacementParts, and Bedford Precision Parts. |
| Function | Material pickup (draws coating from supply container into pump inlet); debris filtration (integrated screen prevents contaminants from entering pump); priming support (enables rapid pump priming and continuous material flow). |
| Compatible Model | SprayTech Airless EP2205. The official EP2205 manual references a suction tube in its priming procedures, and independent parts databases confirm part 0295542 fits this model. Always verify fitment using the correct parts diagram for your exact model and serial number. |
| OEM Part Number | 0295542 Tube, siphon. |
| Replacement Indicators | Physical damage (tube bent, kinked, or cracked); screen damage (filter torn, clogged, or corroded); priming difficulty (pump struggles to prime or loses prime); thread damage (mounting threads stripped or crossed). |
| Related Parts Commonly Serviced Together | Inlet manifold seal (O-ring or gasket sealing the siphon tube to pump inlet); return tube assembly (bypass return tube for priming and recirculation); suction set hardware (mounting nuts, washers, clamps). |
| Why Genuine OEM | Model-specific engineering ensures correct thread specifications, length, and mounting configuration. The rigid design maintains consistent positioning within the material container and the integrated filter protects internal pump components from debris. |
Service guidance: Inspect the siphon tube and screen before each use. Clean the screen with solvent and a soft brush; do not use metal tools that could damage the screen mesh. Ensure the tube is straight and the mounting threads are undamaged. Replace immediately if bent, cracked, or if the screen is torn. If loss of prime occurs after tube replacement, check for an air leak at the tube-to-pump connection: verify mounting threads are clean, the sealing O-ring or gasket is properly seated, and the tube is fully tightened. Always relieve system pressure and disconnect power before servicing.
Frequently Asked Questions
Quick answers for confirming fitment and identifying when replacement is needed.
No reviews yet. Be the first to review this product!
