This Titan 755-204 clutch field (4") is a direct replacement electromagnetic component designed for use on compatible PowrLiner 2850 equipment. It generates the magnetic field that engages the clutch rotor, controlling power transmission from the motor to the pump drive system. Replacing a worn, shorted, or failed clutch field restores reliable clutch engagement, prevents slippage, and ensures consistent sprayer performance.
| Part Number | 755-204 |
|---|---|
| Part Description | Clutch Field (4") |
| Brand | PowrLiner |
| Compatible Models | PowrLiner: 2850 |
| Condition | New |
The Titan 755-204 Clutch Field (4") is a genuine Titan-manufactured replacement electromagnetic component designed for use on the PowrLiner 2850 line striper. This stationary coil generates a magnetic field when energized, which attracts the clutch rotor to engage power transmission from the motor to the pump drive system.
In line striping equipment, electromagnetic clutches allow the motor to run continuously while the pump cycles on and off as needed. When the clutch field is energized, it creates a magnetic field that pulls the rotor into engagement, transmitting power to the pump. Over time, clutch field windings can degrade due to heat, electrical stress, or contamination, leading to short circuits, open windings, or reduced magnetic strength. A failing clutch field can cause slippage, failure to engage, erratic operation, or complete loss of pump drive. Replacing a worn or failed clutch field with this genuine Titan component restores reliable clutch engagement, ensures consistent power transmission, and extends the service life of your PowrLiner equipment.
| Power transmission | Controls engagement of pump drive system |
|---|---|
| Magnetic actuation | Generates magnetic field to attract clutch rotor |
| On/off control | Allows pump to cycle while motor runs continuously |
| Slippage | Clutch slips under load or fails to transmit power |
|---|---|
| Failure to engage | Pump does not engage when clutch is energized |
| Electrical faults | Open circuit, short circuit, or incorrect resistance reading |
| Overheating signs | Burnt smell, discolored windings, or melted insulation |
| Component Type | Clutch Field |
|---|---|
| Size | 4" diameter |
| Voltage | Standard system voltage (consult manual) |
| Resistance | Check service manual for specification |
| Condition | New |
This Titan 755-204 clutch field is designed for use on the following PowrLiner model. Always confirm fitment using the correct parts diagram for your exact model and revision.
| Brand | Compatible Models |
|---|---|
| PowrLiner | 2850 |
When replacing the clutch field, these associated components are often inspected or replaced to ensure a complete repair.
Inspect rotor friction surface and bearings; replace if worn or damaged.
Check rotor bearing for smooth rotation; replace if rough or noisy.
Inspect wiring and terminals for corrosion or damage; repair as needed.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
