Part number 0143215 is an AirCoat Nozzle, size 15/20. This nozzle is designed for air-assisted airless spray systems, controlling both the spray fan width and the material flow rate. The 15/20 size delivers a wide 15-inch spray pattern with a 0.020-inch orifice for high-volume coverage on large surface areas.
| Part Number | 0143215 |
|---|---|
| Part Description | AirCoat Nozzle;15/20 |
| Fits | Spraytech Aircoat GM 2600 |
| Condition | New |
Part number 0143215 is an AirCoat Nozzle with a size designation of 15/20. This precision-engineered fluid tip is designed for the Spraytech Aircoat GM 2600 air-assisted airless spray system. The nozzle serves two critical functions: it defines the width of the spray fan and controls the volume of material flowing through the gun. The 15/20 configuration produces a 15-inch wide fan pattern with a 0.020-inch orifice diameter.
This larger nozzle size is optimized for production-oriented applications requiring maximum coverage speed. The 15-inch fan allows the operator to cover large surface areas such as walls, ceilings, and industrial equipment with fewer passes, significantly reducing application time. The 0.020-inch orifice provides ample flow capacity for higher viscosity materials and thicker film builds.
Nozzles are precision wear items that gradually degrade with use. As the carbide orifice wears, it becomes enlarged and out-of-round, causing pattern defects, increased material consumption, and reduced finish quality. Regular inspection and timely replacement of worn nozzles are essential for maintaining application efficiency and achieving consistent, professional results.
| Fan Width Control | Creates a 15-inch wide spray pattern for maximum coverage per pass |
|---|---|
| Flow Rate Regulation | 0.020-inch orifice delivers high material volume for fast application |
| Atomization Assistance | Precision geometry works with air cap to produce fine, consistent droplet size |
| Pattern Defects | Spray fan has tails, is split, heavy on edges, or distorted shape |
|---|---|
| Finish Quality Decline | Orange peel, streaking, or rough texture despite correct pressure settings |
| Visible Orifice Wear | Orifice appears oval, enlarged, or has visible nicks and scratches under magnification |
| Increased Material Usage | Higher than normal material consumption due to enlarged orifice |
Part number 0143215 is specifically designed for the Spraytech Aircoat GM 2600 air-assisted airless spray gun. This nozzle is part of a comprehensive range of AirCoat nozzle sizes available for this system, allowing users to select the optimal fan width and orifice size for their specific application requirements.
| Compatible Models | Component |
|---|---|
| Spraytech Aircoat GM 2600 | AirCoat Nozzle;15/20 |
The nozzle is the final component in the fluid delivery path. For optimal system performance, these related parts are often inspected, cleaned, or replaced at the same time.
The air cap directs atomizing and shaping air around the nozzle. A damaged or clogged air cap will ruin the spray pattern regardless of nozzle condition.
The needle seals against the nozzle seat. A worn needle or seat will cause drips and affect pattern start and stop.
A clean gun filter prevents debris from reaching and damaging the precision nozzle orifice.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
