Part number 0143115 is an AirCoat Nozzle, size 15/10. This nozzle is designed for air-assisted airless spray systems, controlling both the flow rate and the width of the spray fan. The 15/10 size delivers a specific spray pattern for efficient and uniform coating application on compatible equipment.
| Part Number | 0143115 |
|---|---|
| Part Description | Nozzle,aircoat;15/10 |
| Fits | SprayTech AirCoat GM 2600 |
| Condition | New |
Part number 0143115 is an AirCoat Nozzle with a size designation of 15/10. This component is a critical wear part in air-assisted airless spray guns, responsible for metering material flow and shaping the spray pattern. The innovative nozzle geometry is designed to ensure uniform paint application and softly graduated borders for a high-quality finish.
A worn, damaged, or incorrect nozzle size can cause an uneven pattern, poor atomization, excessive overspray, or improper material delivery. Replacing the nozzle with the correct size restores the intended spray characteristics and application efficiency.
| Flow & Pattern Control | Defines the material flow rate and fan width for consistent coverage |
|---|---|
| Fine Atomization | Works with the air cap to break material into a fine, soft spray for a smooth finish |
| Pressure Efficiency | Engineered to deliver excellent results with relatively low material pressure, reducing overspray |
| Pattern Defects | Spray fan is uneven, split, has heavy edges, or shows pronounced tails |
|---|---|
| Finish Quality Issues | Excessive orange peel, rough texture, or poor atomization in the finish |
| Visible Wear or Damage | Nozzle orifice is egg-shaped, enlarged, nicked, or shows signs of corrosion |
| Changed Application Needs | Switching to a different material or requiring a different fan width or flow rate |
Part number 0143115 is designed for the SprayTech AirCoat GM 2600 spray gun. This nozzle size is part of a range of AirCoat nozzles available for various applications.
| Compatible Models | Component |
|---|---|
| SprayTech AirCoat GM 2600 | Nozzle,aircoat;15/10 |
For optimal spray performance, the nozzle is part of a system of front-end components that are often inspected or serviced together.
Directs the shaping air around the nozzle. A damaged or incorrect air cap will ruin the spray pattern.
Protects the nozzle from contamination in the material. A clogged filter can mimic nozzle problems.
Controls fluid shut-off. A worn needle can cause leaks and affect pattern start-up, independent of the nozzle.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
