The CapSpray X 95, 105 and 115 each have four diagram pages on this site: Main, Turbine, Upper Housing and Lower Housing. The X pages list their own filter can and cover, a cup insert and, on the X 115, the pressure control knob parts and a 6-stage turbine. Order from the X page for your model, not from the classic CapSpray one.
The X diagrams on the site
Each X model has the same four assemblies as the classic CapSprays, so that is 12 pages in all. Start from the CapSpray X Series page, pick your model, then the assembly. Anything that moves air or sits in the filter cans is on Main, the motor and its seals are on Turbine, the switches, light and handles are on Upper Housing, and the cord and exhaust parts are on Lower Housing.
Filter cans, silencers, hose, cup insert and filter kit.
The same layout as the X 95 plus the 5 ft whip hose.
The pressure control knob parts and a switch with its own number.
The 6-stage turbine assembly for the X 115.
What differs by assembly
Parts that differ between the X diagrams and the classic CapSpray diagrams
| Assembly | On the X pages | On the classic pages |
|---|---|---|
| Main: filter can and cover | 0276136A filter can and 2441512A filter cover on X 95, 105 and 115 | 0524948A filter can and 0524949A filter cover |
| Main: cup | 2481976 Cup Insert on X 95, 105 and 115 | Not listed |
| Main: quick coupling | 0275625A Quick Disconnect Female | 0275625 Quick release coupling |
| Upper housing: X 115 | 700-159 knob, 700-175 cap, 700-176 nut, and 2471050 Switch at callout 8 | No pressure control parts; 0524553 On/Off Switch at callout 8 on the 75, 95 and 105 |
| Turbine: 115 | 2470142A, 6-Stage Turbine Assembly 120V (X 115) | 0524290A, Turbine Assembly (classic 115) |
Differences are read from the site's diagram listings. Nothing here says whether an X part and a classic part interchange; open the X page for your model.
X 115 upper housing: the pressure control parts
Titan gives the X 115 a Variable Pressure Control dial that sets air pressure across a range, and the X 95 and X 105 do not have it. On the X 115 Upper Housing page the matching parts are listed: the 700-159 Pressure Control Knob, the 700-175 Potentiometer Cap and the 700-176 Nut with Seal.
The same page lists a 2471050 Switch at callout 8 and a 9850577 Terminal Block. On the X 95 and X 105 pages, callout 8 is the 0524553 On/Off Switch, and those pages also list the 0277472 Air Flow Switch, the 0277475 Air Flow Tube and the 0524547 Warning Light. So an X 115 switch order has to start from the X 115 page, not from a number you copied off another model.
Turbine assemblies
The turbine pages list the complete assembly. The X 95 shows the same 4-stage 0524289A as the classic 95, and the X 105 shows the same 0524280A as the classic 105. The X 115 shows 2470142A, where the classic 115 diagram shows 0524290A. We treat the two 115 numbers as different parts and make no claim that either fits the other. The small parts around the motor, such as the brush kit, shroud seal and can seals, are on the same page, for example the X 105 Turbine Assembly. Match them to your own model's page.
Main assembly: hoses, filters and the cup insert
The X main pages share a pattern. All three list the 0277337 Flex Hose Assembly, the 0275794 Filter Kit, the 0276136A filter can, the 2441512A filter cover and the 2481976 Cup Insert. The X 105 and X 115 also list the 0524405A whip air hose, which the X 95 page does not, and a Maxum Elite gun, 0524027. Titan's own X pages describe each X sprayer as shipping with a Maxum II gun with CapLiner, so check which gun you actually have before you order gun parts.
The filter can and cover on the X pages carry different numbers from the classic ones, which is the part most likely to be ordered wrong. The 2481976 Cup Insert is on the X pages only. We cannot tell from the diagram how it relates to Titan's CapLiner System, and the CapLiner kits and refills are not sold on this site, so ask our parts team if the insert is what you are after.
Parts that look shared
Some numbers appear on both X and classic diagrams: the 0277243 Motor Brush Kit, the 0524592 Power Cord Assembly and the 0524526A Pre Filter Kit are on both. That tells you the number is listed on both pages, and nothing more. Before you order, open the X page and match the callout.
Finding your X model
Know which of the three you own: the X 95 is the 4-stage, the X 105 the 5-stage and the X 115 the 6-stage with Variable Pressure Control. If the diagram does not settle a part, call (713) 931-0006 with the model and serial number and our parts team will confirm the fitment before you order. For the filter side, see our CapSpray filter guide; for the parts every model shares, the classic series page is here.
Parts that appear on the CapSpray X diagram pages:
−8%
The Short Version
Open the X page for your model and order from its callouts. The X pages list their own filter can, cover and cup insert, the X 115 has its own pressure control parts, switch and 6-stage turbine, and a number shared with a classic page only means it is listed in both places.
Not sure which X diagram page has your part?
Call (713) 931-0006 with your CapSpray X model and serial number and our parts team will confirm the part before you order.
(713) 931-0006Order by Parts Diagram