Titan part 0295309 is a lower spacer, 0.30 used in the fluid section or piston assembly of the SprayTech Airless EP2105 sprayer. This precision spacer sits beneath the packings or piston, establishing correct vertical clearance and packing compression. Replace a worn, crushed, or missing spacer to restore proper sealing, prevent fluid bypass, and maintain consistent pump performance.
| Part Number | 0295309 |
|---|---|
| Part Description | Lower Spacer, 0.30 |
| Brand | Titan |
| Fits |
|
| Condition | New |
The Titan 0295309 Lower Spacer, 0.30 is a precision ground spacer used in the fluid section of the SprayTech Airless EP2105 sprayer. It positions the lower packings or seals and establishes correct vertical clearance for the piston assembly. This spacer is critical for achieving proper packing compression and preventing fluid bypass.
A missing, crushed, or incorrect‑thickness lower spacer can cause packing under‑compression (leading to internal leakage and pressure loss) or over‑compression (causing rapid wear, heat buildup, and motor stalling). Replacing a damaged spacer with the exact 0.30 thickness restores factory specifications, ensures reliable sealing, and extends pump life.
| Positions lower packings | Sets correct stack height for seal compression |
|---|---|
| Prevents fluid bypass | Maintains proper seal preload to stop internal leaks |
| Protects pump components | Reduces wear on packings, piston, and cylinder |
| Worn or crushed | Spacer shows deformation, cracks, or thickness reduction |
|---|---|
| Rebuilding fluid section | Always replace spacer when replacing packings or piston |
| Missing spacer | Previous repair omitted the spacer – pump will leak |
| Incorrect thickness | Wrong spacer installed causing premature failure |
Titan part 0295309 is compatible with the following airless sprayer. Always confirm fitment using the correct parts diagram for your exact model.
| Brand / Model | Component |
|---|---|
| SprayTech Airless EP2105 | Lower spacer, 0.30 |
When replacing the lower spacer, these components are typically inspected or replaced at the same time.
The spacer directly affects packing compression – replace packings with the spacer.
Check and replace the matching upper spacer (part 0295308) at the same time.
Inspect for scoring or wear if the pump was leaking before repair.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
