SprayTech part 02283 is a transducer packing kit designed to rebuild the pressure transducer assembly on compatible SprayTech Airless sprayers. This kit contains the seals, o‑rings, and packing required to restore proper pressure sensing and leak‑free operation. Replacing worn or damaged transducer packing eliminates pressure fluctuations, erratic operation, and fluid leakage, ensuring accurate pressure control and reliable sprayer performance.
| Part Number | 02283 |
|---|---|
| Part Description | Transducer Packing Kit |
| Brand | SprayTech |
| Fits | SprayTech Airless EP2300 SE, EP2400, EP2510, EP2300 |
| Condition | New |
The SprayTech 02283 Transducer Packing Kit contains all the seals, o‑rings, and packing components necessary to rebuild the pressure transducer assembly on select SprayTech Airless sprayers. The transducer converts fluid pressure into an electrical signal used by the control system to maintain consistent spray pressure. Worn or leaking transducer packing can cause pressure fluctuations, unstable spray patterns, and fluid seepage.
Over time, the packing inside the transducer can wear due to normal use, abrasive coatings, or high‑pressure cycles. Rebuilding the transducer with this genuine SprayTech kit restores accurate pressure sensing, eliminates external leaks, and prevents erratic operation, ensuring your sprayer performs like new.
| Seals fluid path | Prevents leakage between the transducer and the fluid section |
|---|---|
| Maintains pressure accuracy | Ensures the transducer senses true fluid pressure for stable output |
| Restores reliable operation | Eliminates pressure surges, stuttering, or pump cycling issues |
| Visible fluid leakage | Oil or paint leaking from the transducer area |
|---|---|
| Pressure fluctuations | Needle jumps erratically or spray pattern varies |
| Worn seals / o‑rings | Seals appear flattened, cracked, or hardened |
| During transducer service | Always install fresh packing when servicing the transducer |
SprayTech part 02283 is compatible with the following sprayer models. Always confirm fitment using the correct parts diagram for your exact model and serial number.
| Model | Component |
|---|---|
| SprayTech Airless EP2300 SE | Transducer Packing Kit |
| SprayTech Airless EP2400 | Transducer Packing Kit |
| SprayTech Airless EP2510 | Transducer Packing Kit |
| SprayTech Airless EP2300 | Transducer Packing Kit |
When rebuilding the transducer, it is common to inspect or replace these additional components at the same time.
If the transducer body is damaged or corroded, replace the entire assembly.
Erratic pressure may also be caused by a failing control board; test if problems persist.
Leaks near the transducer may originate from the fluid section; inspect all seals.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
