C.A. TECH PK-OC14-C5-211 Cart Mount Pump C211
C.A. TECHNOLOGIES PEAK COUGAR AAA CART SYSTEM
C.A. Technologies PK-OC14-C5-211 PEAK Cougar Cart Mount Pump combines a 14:1 stainless-steel pump with the full-size C211 Cougar AAA gun. Its .011-inch tip, approximately 4-inch fan and mobile cart configuration provide controlled professional finishing for narrow woodwork, cabinetry and production components.
The standard C5 configuration uses a 3/8-inch material inlet; it is not the separate 1/2-inch version. The C211's .011-inch orifice and 20-degree geometry produce an approximately 4-inch fan, making this outfit particularly useful when controlled coating placement on narrow workpieces matters.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | PK-OC14-C5-211 is a C.A. Technologies PEAK Performance Series 14:1 Air Assist Airless cart outfit configured with the full-size Cougar C211 spray gun. The system combines an all-stainless-steel fluid section, PEAK stationary-magnet air-motor technology and mobile cart mounting. Maximum fluid pressure is 1,500 PSI, and the standard configuration uses a 3/8-inch material inlet. |
| Function | The pneumatic PEAK pump supplies pressurized coating to the C211 gun. Primary atomization occurs as material passes through the .011-inch AAA tip, while low-volume compressed air at the Cougar air cap refines the pattern. This combination delivers the production capability of high-pressure fluid application with softer pattern control suited to professional fine-finishing operations. |
| Industrial Applications | Suitable for professional cabinetry, furniture, millwork, architectural wood components and compatible industrial finishing. The C211's approximately 4-inch fan is particularly useful for trim, frames, rails, narrow cabinet components, furniture parts and profiles where a wider fan can place unnecessary coating beyond the workpiece. |
| Accurate Compatible Titan Machines | This SKU is a complete C.A. Technologies finishing outfit and is not a replacement pump or accessory for a Titan sprayer. No direct Titan-machine fitment should be inferred. PK-OC14-C5-211 belongs to the C.A. Technologies PEAK OC14 family, with the “C” configuration identifying the full-size Cougar gun and C5 identifying the standard cart-mounted outfit. |
| Accurate Part Number | PK-OC14-C5-211 — C.A. Technologies PEAK 14:1 cart-mounted AAA outfit with full-size Cougar C211 gun. The 211 configuration uses a .011-inch orifice and 20-degree spray geometry for an approximately 4-inch fan. The standard C5 configuration uses a 3/8-inch material inlet; 1/2-inch versions carry the additional “12” configuration designation. |
| Compatible Parts & Assemblies | The system is built around the PEAK 14:1 stainless-steel pump, cart assembly and full-size Cougar C211 Air Assist Airless gun. The Cougar platform uses interchangeable AAA fluid tips, allowing compatible changes in orifice size and fan width. The standard 211 configuration uses the .011-inch tip and Cougar HVLP air-cap system for controlled atomization. |
| Related Parts Commonly Serviced Together | Routine maintenance commonly involves the 211 fluid tip, Cougar air cap, gun filter, needle and seal components, fluid and air hoses, pump fluid-section seals and packings, material inlet and siphon components, pressure regulators and PEAK air-motor service components. Clean filtration and an unworn fluid tip are particularly important for maintaining consistent fine-finish atomization. |
| Common Problems Solved | Provides a mobile production-finishing system while reducing the need to spray narrow work with an unnecessarily broad fan. The C211 concentrates its .011-inch fluid delivery into an approximately 4-inch pattern, helping control coating placement. Air-assisted atomization further refines the pattern to support smoother finishes and reduced overspray compared with conventional high-pressure airless application in suitable work. |
| Use with Coating Systems | The PEAK stainless-steel fluid section is designed for professional finishing materials, while the .011-inch 211 tip is particularly useful with compatible lower-viscosity fine-finish coatings such as stains, sealers, lacquers and appropriate topcoats. Final coating compatibility, tip selection and operating pressure must be matched to material viscosity, solids content and the coating manufacturer's application requirements. |
| OEM & Brand Information | PK-OC14-C5-211 is C.A. Technologies equipment and should not be represented as Titan-manufactured or Titan OEM. It belongs to the PEAK Performance Series and combines C.A. Technologies' 14:1 stainless-steel pump technology with the company's full-size Cougar manual AAA spray gun. The Cougar is rated for a maximum fluid pressure of 1,500 PSI. |
| Commercial Benefits | Cart mounting gives production finishers the flexibility to reposition the PEAK system instead of committing it to a fixed wall station. The C211's narrow fan helps conserve material on smaller components, while the 14:1 pump supports professional production output. Interchangeable Cougar tips also allow the system to be adapted later for wider fans or different material-output requirements. |
Contractor Selection Insight
Choose PK-OC14-C5-211 when you want the full-size Cougar gun and PEAK 14:1 pump on a movable cart, but your work requires a narrow approximately 4-inch fan. Its .011-inch tip is useful for controlled fine-finish coating delivery on trim, rails and smaller components. For the same .011-inch material output with a wider approximately 8-inch fan, compare the C411 configuration. If you specifically need a 1/2-inch material inlet, select the separately coded C5-12 version rather than this standard 3/8-inch configuration.
FAQ Section
Quick answers for professional finishers evaluating the PK-OC14-C5-211 PEAK Cougar cart system.
No reviews yet. Be the first to review this product!