C.A. TECH PK-OB14-PC-211 Half Inch Pc Mount Pump
C.A. TECHNOLOGIES PORTABLE BOBCAT AAA FINISHING SYSTEM
C.A. Technologies PK-OB14-PC-211 PEAK Bobcat AAA System combines a 14:1 stainless-steel pump, compact Bobcat gun and 211 tip on a portable compressor-equipped cart. Its .011-inch tip and approximately 4-inch fan provide controlled professional finishing on narrow components and detailed work.
This PC configuration is the portable Bobcat PEAK outfit with onboard oil-less compressor equipment. The base PK-OB14-PC-211 designation should not automatically be described as the dedicated 1/2-inch fluid-inlet version; C.A. Technologies uses separate configuration codes for inlet and packing options.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | PK-OB14-PC-211 is a C.A. Technologies PEAK Performance Series portable Air Assist Airless outfit built around the OB14 Bobcat platform. It combines the all-stainless 14:1 PEAK pump with the compact Bobcat AAA spray gun and 211 tip configuration on the PC portable cart platform. The OB14 system is rated for fluid pressures up to 1,500 PSI and is designed for professional fine-finish production. |
| Function | The pneumatic 14:1 PEAK pump pressurizes coating material for primary airless atomization through the Bobcat 211 tip. Low-volume compressed air at the Bobcat air cap then shapes and refines the pattern. C.A. Technologies describes this combination of airless delivery and conventional/HVLP atomizing technology as producing a soft, highly atomized pattern for fine-finish and production work with reduced overspray. |
| Industrial Applications | Suitable for professional cabinetry, furniture, millwork, wood finishing, narrow profiles, trim, fabricated components and other fine-finish production. The 211 configuration is particularly useful on narrow parts because its 20-degree spray geometry produces an approximately 4-inch fan rather than the broader patterns used for larger panels and production surfaces. |
| Accurate Compatible Titan Machines | PK-OB14-PC-211 is a complete C.A. Technologies finishing system and is not a replacement component for a Titan sprayer. No Titan-machine fitment should be inferred. It belongs to the C.A. Technologies PEAK OB14 family, where “B” identifies the compact Bobcat spray-gun configuration and “PC” identifies the portable compressor-equipped cart arrangement. |
| Accurate Part Number | PK-OB14-PC-211 — C.A. Technologies PEAK 14:1 portable Air Assist Airless outfit with compact Bobcat gun and 211 tip configuration. The 211 tip uses a 0.011-inch orifice and 20-degree spray angle for an approximately 4-inch fan. The exact inlet, seal and filtration options should be determined from the complete configuration code rather than inferred from a reseller description. |
| Compatible Parts & Assemblies | The outfit centers on the PEAK 14:1 stainless-steel fluid section, PEAK stationary-magnet air-motor platform, compact Bobcat Air Assist Airless spray gun and 211 fluid-tip configuration. PC-series outfits use a portable cart with oil-less compressor equipment. Bobcat systems use the C.A. Technologies AAA tip family, allowing compatible changes in fan angle and orifice size for different coating requirements. |
| Related Parts Commonly Serviced Together | Routine service areas include the Bobcat 211 fluid tip, HVLP air cap, gun filter, needle and seal components, fluid and air hoses, regulators, pump fluid-section seals and packings, PEAK air-motor components, material siphon or inlet components, and compressor-related filtration and air-storage hardware. Worn tips, restricted filters and deteriorated pump seals can all affect pattern quality or fluid-pressure stability. |
| Common Problems Solved | Provides a mobile AAA finishing platform where a permanent wall-mounted pump or shop-air installation is impractical. The compact Bobcat gun reduces operator bulk, while the narrow 211 pattern helps keep coating on smaller workpieces. Air-assisted pattern refinement helps reduce the hard edges and excess overspray associated with conventional high-pressure airless spraying when performing suitable fine-finish work. |
| Use with Coating Systems | The 0.011-inch 211 tip is suited to compatible fine-finish materials requiring relatively controlled material delivery. Applications can include stains, sealers, lacquers and other appropriate low-to-medium viscosity finishing materials. Coating chemistry, solids content, viscosity and required film build must be considered when selecting fluid pressure, atomizing air and tip configuration. |
| OEM & Brand Information | PK-OB14-PC-211 is C.A. Technologies equipment, not a Titan-manufactured or Titan OEM pump. The PEAK OB14 combines C.A. Technologies' stainless-steel 14:1 fluid section with its compact Bobcat manual AAA gun. C.A. Technologies identifies the OB14 PEAK system as professional Air Assist Airless equipment capable of operating at fluid pressures up to 1,500 PSI. |
| Commercial Benefits | The portable PC platform gives finishers an integrated pump-and-compressor solution that can move between production areas instead of requiring a fixed wall installation. Its compact Bobcat gun reduces hand weight compared with larger full-size gun configurations, while interchangeable tips allow the same AAA platform to be adapted for different fan widths and coating outputs as production requirements change. |
Contractor Selection Insight
Choose PK-OB14-PC-211 when you want the PEAK 14:1 platform in a portable compressor-equipped package with the lighter Bobcat gun and a narrow 0.011-inch 211 setup. This combination is particularly practical for trim, profiles and smaller furniture or cabinet components. If your application specifically requires a 1/2-inch high-volume fluid inlet, confirm the complete C.A. Technologies configuration code before ordering because the base PC-211 designation alone does not establish that inlet option.
FAQ Section
Quick answers for finishers evaluating the PK-OB14-PC-211 portable Bobcat PEAK system.
No reviews yet. Be the first to review this product!